ELECTRIC VIBRATING POKERS
9
en
M35 AFP-M5 AFP-M6 AFP-M7 AFP-M8 AFP
MP35 AFP-MP5 AFP-MP6 AFP-MP7 AFP
6 INSTRUCTIONS TO ORDER SPARE PARTS
6.1 INSTRUCTIONS TO ORDER SPARE PARTS
1. All spare parts request must include PART CODE NUMBER AS STATED IN THE PART LIST.
We recommend to include ITEM´S MANUFACTURE NUMBER.
2. The identification plate with manufacture and model number is located in the top part of the
motor`s plastic frame. The transmission and pokers have the manufacture number engraved outside.
3. Let us to know the correct shipping instructions, including the wished route and the address and
consignee`s complete name.
6.2 INSTRUCTIONS TO REQUEST WARRANTIES
1. The warranty is valid 1 year after the purchasing of the machine, the warranty will cover parts
with manufacture`s defects. In no case the warranty will cover a malfunction due to improper usage
of the equipment. Labour and shipping fees will always be paid by the customer.
2. In all warranty requests THE MACHINE MUST BE SENT TO ENARCO, S.A. or to an
AUTHORIZED SHOP, always including the complete address and name of the consignee.
3. The Technical Assistance Service will immediately notify you if it accepts the warranty and if
requested, it will send a technical report.
4. The warranty will be void if any equipment has been previously handled by personnel outside of
ENARCO, S.A. or not authorized by it.
NB: ENARCO, S.A., reserves the right to modify any part of this manual without prior notice.
7 RECOMENDATIONS OF USE
1. Choose the type of vibrator adequate to the dimensions of the structure to vibrate, the
distance among the reinforcement and the slump cone. It is recommendable to have an
additional concrete vibrator.
2. Before starting check that the concrete vibrator is in good use and it works correctly. Use
the means of safety and protection.
3. Pour the concrete in the structure avoiding high heights. Try to pour levelled the
concrete. The thickness of every layer should be less than 50 cm; it is recomendable between
30 and 50 cm.
4. Introduce the vibrator vertically in the concrete mass without moving it horizontally. Do
not use the vibrator to push the concrete horizontally. The concrete vibrator should be
introduced into the mass at regular intervals. The interval should be from 8 to 10 times the
diameter of the poker. See the concrete in the process of vibrating to determine the field of
action of the vibrator. This field should be overlapped to avoid areas without vibrating. To
obtain an optimum compacting of the concrete, plunge it 10 cm into the precedent layer to
assure a good adherence. The time in vibrating the different layers should not be big to avoid
cold joints. Do not push or force the vibrator into the mass, it could be stuck in the
reinforcements.
5. The time of vibration in each point depends on the type of the concrete, the size of the
vibrator and other factors. This time can be from 5 to 15 seconds after the immersion in each
point. The time is shorter for a fluid mass; a vibration in excess can produce segregation. It is
considered the concrete to be well vibrated when the surface around the poker is shiny and
compact and there is no more air bubbles, as well a change in the noise of the vibrator is
produced. So much defects in structures are produced due to perform the vibration in an
unmethodically way and in a hurry.
