EMX Ultra II D-TEK Manuel utilisateur
APOLLO
EMX Ultra II D-TEK Plug In Style
Vehicle Loop Detector
*AS A SAFETY DEVICE*
1. Connect Terminal 3 on loop detector to 12V on one of the
3 pin terminal strips.
2. Connect Terminal 4 on loop detector to Terminal GND on
one of the 3 pin terminal strips.
3. Connect Terminal 5 on loop detector to Terminal 13 GND.
4. Connect Terminal 6 on loop detector to Terminal 14
SAFETY.
GND
INP
12V
GND
INP
12V
EDGE
EDGE
GND
GND
STOP
CLOSE
OPEN
GND
GND
FREE EXIT
GND
SHADOW
GND
SAFETY
GND
FIRE
UL
1.
2.
3.
4.
APOLLO
EMX Ultra II D-TEK Plug In Style
Vehicle Loop Detector
*AS AN OPENING DEVICE*
1. Connect Terminal 3 on loop detector to 12V on one of the
3 pin terminal strips.
2. Connect Terminal 4 on loop detector to Terminal GND on
one of the 3 pin terminal strips.
3. Connect Terminal 5 on loop detector to Terminal 9 GND.
4. Connect Terminal 6 on loop detector to Terminal 10 FREE
EXIT.
GND
INP
12V
GND
INP
12V
EDGE
EDGE
GND
GND
STOP
CLOSE
OPEN
GND
GND
FREE EXIT
GND
SHADOW
GND
SAFETY
GND
FIRE
UL
1.
2.
4.
3.
Table des matières
Autres manuels EMX Capteur de sécurité
EMX
EMX IRB-4X-2 Manuel utilisateur
EMX
EMX ULTRA-MVP-2 Manuel utilisateur
EMX
EMX HAWK 2 Manuel utilisateur
EMX
EMX CarSense 101 Manuel utilisateur
EMX
EMX ULT-PLG Manuel utilisateur
EMX
EMX IRB-325 Manuel utilisateur
EMX
EMX ULT-V2 Manuel utilisateur
EMX
EMX LRS-C1 Manuel utilisateur
EMX
EMX NIR Manuel utilisateur
EMX
EMX ULT-MVP-2 Manuel utilisateur
