applicable. It is safer than using your hands and it frees up both
hands to operate the tool.
DON’T OVERREACH: Always maintain proper footing and balance
Do not reach over or across tools or machinery in use.
MAINTAIN TOOLS WITH CARE: Keep tools sharp and
clean for better and safer performance. Follow instructions
for lubricating, safe performance and changing
accessories. Keep handlesdry, clean, and free from oiland
grease.
REMOVE ALLADJUSTING KEYS AND WRENCHES:
Make it a habit to check that keys and adjusting wrenches
are removed from any rotating tool before using.
AVOID UNINTENTIONAL STARTING:
Do not carry tools with the finger on the switch. Be sure the
directional switch is in self-lock position when not in use or
when changing attachments.
STAY ALERT:Watch what you are doing & use common
sense. Do not operate any tool when you are tired.
CHECK FOR DAMAGED PARTS:Before each use, check
the tool for any damage. Check bits and blades to make
sure they are sharp and not chipped. Inspect screws and
tighten any loose screws.Any part that isdamaged should
be properly repaired or replaced by an authorized service
center unless indicated elsewhere in the instruction manual.
Defective switches should be replacedby an authorized
service center. Donot use the tool if the switch does not
turn on and off orwork properly.
GUARD AGAINST ELECTRIC SHOCK:Prevent body
contact with grounded surfaces such as: pipes, radiators,
ranges, and refrigerators. Before drilling or cutting into
walls, floors, or an area where “live” electrical wires may be
present, always ensure that you will not encounter live
wires to avoid electric shock.
IMPORTANT SAFETY INSTRUCTIONS
