Email: testinst@emona.com.au Web: www.protag.com.au, www.emona.com.au
Using the Scanner
InstalTest XC
1. Switch the scanner ON by pressing “Power”
key(small button) until scanner flashes blue.
2. On the IT XC, press “Memory Organizer”
select a work space.
3. The Bluetooth Icon should now appear at the
top right of the screen. Wait for the red cross
to disappear, which indicates the scanner is
connected to the tester.
4. You can now scan the barcodes. For new
barcodes, you will be asked if you would like
to add a new ‘element’ to the list. Press Yes,
choose the element type, and then press
Add. If you re-scan an already created
element, the element will be automatically
highlighted.
PrimeTest 300
1. Switch the scanner ON by pressing “Power”
key(small button) until scanner flashes blue.
2. On the PrimeTest 300, press “Menu”
“Auto Mode”. PrimeTest will now attempt to
connect to the scanner.
3. When connection is made, the blue LED on
the scanner will now flash once every 3
seconds instead of every 1 second. Also, the
Bluetooth icon will appear on the PrimeTest
300 screen.
4. Press the “Trigger”(large button) to scan a
barcode. The scanner will beep when it
detects a good barcode.
PrimeTest Elite
1. Switch the scanner ON by pressing “Power” key (small button) until scanner flashes blue.
2. On the PrimeTest Elite, enter the PAT testing page.
3. When connection is made, the scanner icon will appear on the PrimeTest Elite screen if there is a
cross through the barcode symbol this indicates that the scanner is not connected.
4. Press the “Trigger” (large button) to scan a barcode. The scanner will beep when it detects a good
barcode.
