Eminent HASTE Manuel utilisateur
OWNERS MANUAL
HASTE
EMINENTCYCLES.COM
Designed & Assembled in California
EMINENTCYCLES.COM
Introduction
Intended Use
Unboxing
Assembly
Setup
Operation
Maintenance
Specifications
Warranty
Disclaimers
Custom Settings
2
3
4
7
13
23
27
33
34
35
36
01
TABLEOFCONTENTS
EMINENTCYCLES.COM 02
Thank you for your purchase. You are on your way to
experiencing the next level of the elite experience with
the most advanced mountain bike available. We hope
you truly enjoy your new bicycle, and we are thankful to
be your brand of choice.
The following pages will provide you with the information
needed to properly operate, tune, and maintain your
new bicycle. If you require more information about this
product or if you are missing anything, please call or visit
our website www.eminentcycles.com.
Note: All Guides and OEM Manuals can be viewed or
download from our website under Parts & Service/Guides
& Manuals section.
Warning: Read this owner’s manual before riding your
bicycle. Use of this bicycle is at your own risk. Bicycling
can be a dangerous activity under even the ideal
conditions. Proper maintenance and assembly of this
bicycle could help reduce the risk of injury or damage.
This manual contains “Warnings” indicating a potential
hazard condition or situation, which should not be
disregarded. If ignored or corrective actions are not taken,
this could result in damage, injury, or death. Be sure to
read and understand all the sections of this manual.
Our mountain bikes are technologically advanced
high-performance products that use complex materials
and engineered fitments. In order for our products to
sustain it’s performance and safety, it will require periodic
maintenance which may include repairs, parts replace-
ment, or component replacement. This manual does not
cover these types of repairs in detail. Eminent Cycles
suggest these types of repairs are performed by a profes-
sional bicycle mechanic. Eminent Cycles does not warrant
repairs, parts, or components, nor accepts liability for any
maintenance done by non-professional bicycle mechan-
ics. Please contact our service department first if you are in
need of major maintennce or repair.
If you encounter issues with your bicycle that aren’t
covered in this manual, please contact our customer
are eager to resolve your concern.
INTRODUCTION
03
This bicycle was designed for Enduro, All-Mountain, and
Technical Trail type recreational riding. Riding in more
extreme conditions than what is listed, increases the stress
on every part of your bicycle and decreases the lifespan
of the bike and its components. Avoid conditions that
could increase stress to the frame and its components.
It is not possible to define a timetable for replacement of
the frame or its components as this varies for each rider
and the terrain they ride. A thorough inspection of your
bicycle and components before each ride is recommend-
ed even if no crash has occurred.
Warning: Make sure you have reviewed and understood
the warnings, instructions, and maintenance techniques
required to operate your new bicycle before riding.
Warning: Riding an off road bicycle (mountain bicycle) is
inherently dangerous and as the rider, you voluntarily
assume the risk and responsibility that injury or death could
occur. We recommend that at all times, safety/protective
gear be worn during bicycle operation (example: full face
helmet, body armor, gloves, etc…).
Warning: Severe off road riding, jumping, and stunt riding
is extremely dangerous. Speeds can reach that of a
motorcycle and therefore the hazards and risks are very
high and similar. You voluntarily assume all risk and
responsibility when riding under these conditions and
Eminent Cycles does not warrant the bicycle frame or
components for such activities.
Warning: Riding during the rain or through water can
decrease initial braking functionality resulting in longer
braking distances. Please be cautious when riding in wet
conditions.
Warning: Riding during night conditions poses increased
risk and should be considered prior to riding.
INTENDEDUSE
EMINENTCYCLES.COM 04
Warning: Before you begin the process of removing the
bicycle and its components from the Bicycle Box, please
read the complete “Unboxing” section first! Following
these instructions will decrease the potential of detuning
or damage to the bicycle and it’s components during
unboxing and assembly.
The majority of this bicycle is shipped pre-assembled and
pre-tuned at the factory. Minimal assembly and time is
required to have a ready to ride bicycle. All tools and
your specific suspension settings are included in this
Bicycle Box.
Note: The Bicycle Box is designed to be reusable. Keep
this box for shipping your bicycle to your adventure
destinations or for any potential warranty service.
Warning: The Bicycle Box must be laying on its largest side
with the Eminent Logo and Text right side up along its
sides.
UNBOXING
05
UNBOXING
Step 1: Open the Bicycle Box cover so that it is laying flat
on the floor.
Step 2: Remove the straps that are holding the frame
assembly to the base of the box. Do not remove the
straps to the suspension just yet.
Step 3: Carefully remove the bicycle frame assembly from
the box including the handlebars. Mount the frame
assembly in a bike stand or lay the bike assembly down on
a soft carpet floor. Gently place or drape the handlebars
near the frame.
EMINENTCYCLES.COM 06
UNBOXING
Step 4: Remove the front wheel and all the parts, tools,
and paperwork included in the parts box. Place them
near the frame assembly.
Step 5. Inspect the bicycle frame and components for
damage and that your specific build is correct to your
order per the invoice. If there are any issues, please
contact our customer service at service@eminentcy-
cles.com or give us a call.
07
Handlebar
Front Wheel
Suspension
Pedals
8
9
10
11
ASSEMBLY
Table des matières
