EMGA ED-H Series Manuel utilisateur

*859.715

*859.725

*859.735

859715-25-35 en ma 2012-07

CONTENTS

1. PRECAUTION BEFORE USINGTHE SCALE.......................................4

2. INTRODUCTION..............................................................................................6

3. COMMON SPECIFICATIONS .....................................................................7

4. DISPLAYS ............................................................................................................8

5. KEYDESCRIPTIONS......................................................................................9

6. OPERATIONS...................................................................................................11

6.1 Zeroing the display....................................................................................................................................11

6.2 Unit selection..............................................................................................................................................11

6.3 Taring ...........................................................................................................................................................11

6.4 Percentage...................................................................................................................................................12

6.5 Counting pieces..........................................................................................................................................13

6.6 Check-weighing/counting/percentage...................................................................................................14

6.7 Hold function..............................................................................................................................................16

6.8Accumulation (summing)........................................................................................................................17

6.9 Subtraction function..................................................................................................................................18

7. USER PROGRAMMINGFUNCTIONS ...................................................19

7.1 Backlight type.............................................................................................................................................19

7.2 RS-232 transmission method..................................................................................................................19

7.3 Label format setting .........................................................................................20

7.4 Baud Rate setting.......................................................................................................................................21

7.5 RS-232 transmission method in accumulation mode.........................................................................21

7.6 Zero tracking range ...................................................................................................................................22

7.7 Stable class range.......................................................................................................................................22

7.8 Selection of the available units................................................................................................................23

8. BATTERY OPERATION...............................................................................24

9. RS-232 OUTPUT...............................................................................................25

10.AUTO CALIBRATION.................................................................................33

11. RECOVERYOFTHE DEFAULT CALIBRATION VALUE FROM MEMORY

.33

12. VARIABLES ....................................................................................................34

13. TABLE LIST FOR FULLCAPACITY.....................................................36

14. ERROR CODES.............................................................................................36

15.TECHNICALDATA......................................................................................37

859715-25-35 en ma 2012-07

1. PRECAUTION BEFORE USING THE SCALE

859715-25-35 en ma 2012-07

Environment

The scale should always be used in an environment, which is free from excessive air currents,

corrosives, vibration, and temperature or humidity extremes. These factors will affect

displayed weight reading.

DO NOTinstall the scale:

*Next to open windows or doors causing drafts or rapid temperature changes

*Near air conditioning or heating vents

*Near vibrating, rotating or reciprocating equipment

*Near magnetic fields or equipment that generates magnetic fields

*On an unstable work surface

*In a dusty environment

*In direct sunlight

Leveling the scale

The scale is equipped with a level indicator on the right bottom side of the front panel and

four adjustable leveling feet. Adjust the leveling feet until the bubble appears in the center

circle of the indicator.

Turn on the scale

Do not turn on scale with anything on the platform. The switch is located at the bottom of the

right side of the scale. The scale will start to count down from nine to zero. Then the scale is

ready for use. Give a warm-up for 15~30 minutes before use.

2. INTRODUCTION

The precision electronic weighing scale offers a range of capacities from 3 kg to 30kg.

The scales are very simple to use and applicable for general weighing. The user can also use

the parts counting and percent weighing functions for special applications. Special functions

are available for weighing in up to 4 different units of weight. And the scale use grams as the

default unit.

The standard RS-232 interface allows the data to be sent to a computer or printer. (Only for

the scale with RS-232 interface)

The scale is with large easy to read LCD display with backlight, and all the keypads are sealed

membrane switches.

The scale includes audible alarm for pre-set weights, tare and an accumulation facility that

allows the count to be stored and recalled as an accumulated total.

859715-25-35 en ma 2012-07

3. COMMON SPECIFICATIONS

Interface RS-232 Output Optional

Operation Temperature 0℃~ 40℃/ 32℉~ 104 ℉

Power supply AC Adaptor 12V/800mA

Display 6 digits LCD digital display

Pan Size (mm/inch) 306(W) x 222(D) / 12.0 (W) x 8.7 (D)

Functions

-Weighing

-Counting pieces

-Percentage

-Check-weighing

-Check-counting,

-Check-percentage,

-Accumulation(summing)

Other Features and Specs Internal rechargeable battery

859715-25-35 en ma 2012-07

4. DISPLAYS

The LCD display will show a value and a unit to the right of the digits. Other labels are TARE,

GROSS weight, ZERO, stable“” and for Low battery “ ”.

859715-25-35 en ma 2012-07

5. KEY DESCRIPTIONS

KEYS FUNCTIONS

Set the zero point for all subsequent weighing. The display shows

zero.

Tare the scale. Stores the current weight in memory as a tare

value, subtracts the tare value from the weight and shows results.

This is the net weight.

Asecondary function “ ”, or “ Enter ” key when setting

parameters or other functions.

Set the limits for check weighing.Allow setting of either the low

limit or the high limit or both.

Secondary function “Ż”, is to move the active digit to the left when

setting values for parameters or other functions.

Enter the percent weighing function.Allows the weight to be seen

when parts counting.

Secondary function “ Ź”, is to move the active digit to the right

when setting values for parameters or other functions.

Be used to select the functions of the scale. If the scale is in

weighing mode, it will select parts counting. Of it is not in weighing

mode it will return the user to weighing.

Asecondary function “Ÿ”, increment the active digit when setting

values for parameters or other functions.

Print the results to a PC or a printer by using the optional RS-232

interface. It also adds the value to the accumulation memory if the

accumulation function is not automatic.

Press this key to enter into accumulation function. The displaywill

showAccumulation times and total weight.

Secondary function (Exit), is to return to normal operation when

the scale is in parameter setting mode.

Press this key to hold the display when an active thing is weighted.

Select weigh units (kg, g, oz, and lb)

Asecondary function (Clear), is used to clear values when setting

values for parameters or other functions.

859715-25-35 en ma 2012-07

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EMGA Échelle

EMGA

EMGA PR-II Series Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur