320210 en ma 2012 04 6/14
6. Unpacking and installation. Expobar 600AD
UNPACKING AND INSTALLATION:
Warning: All appliances’ technical handling operations such as installation, maintenance,
or service should be performed by certified personnel or by your local dealer.
- After opening the box, make sure that the appliance is intact and that there is no visible damage.
Ifthereisanydoubt, DONOT use the appliance and call your localdealerforfurtherassistance.
- Unpackthecartonboxcarefully.Foryourconveniencewesuggeststoring all packaging
materialswheretheycanbe used in the future, whenever the appliance’s transportationis
necessary.
- Place the grinder on a stable flat counter in a dry area away from water or water splashes.
- Positionthecoffeeresiduetrayunderneaththebodyinfrontofthe appliance.
- Installthe beans hopper firmly on top of the body inside the top blade holder.
- Fasten the hopper to the appliance body by means of the supplied screw. (fig.6.1)
Makesurethatthescrewisinsertedcompletelythroughbothholesinthehopperandinthetop
bladeholder.
- NEVER OPERATE THE GRINDER IF THE BEAN HOPPER IS NOT FULLYSECURED IN ITS
POSITION.
- Before plugging in the electrical cord, make sure:
- The appliance voltage and frequency rating (according to the back side label) is the same
asthesupply mains.
- Thewallsocketisfittedwithanefficientgroundcontact.DONOTplugtheapplianceintothe
supplymains if the ground system wasnot positively checked to be incompliance with
currentsafetyrules.
ITISCOMPULSORYTOGROUNDTHEAPPLIANCE.The manufacturercannotbeheld
responsibleintheeventthatthisregulationisnotcompliedwith.
- The power consumption of the appliance (according to the backside label) is consistent
withtherelevant wall socket capacity.
- The wall socket is protected against short outs and power surges.
- Donot use extension cables, plugadapters for multiple sockets, or make shift connections.
- Plugintheappliance.
- Upon first time operation, and before placing beans in to the hopper, VISUALLYcheck that the
blade rotation direction is clockwise by switching the appliance ON for a few seconds.
- Shouldtherotation direction be wrong, do notusethe appliance and contact your localdealer
forfurtherinstructions.
fig.6.1
