Emerson Fisher 4320 Manuel utilisateur

www.Fisher.com

Hot Swap Procedure

Supplement to Fisher™4320 Wireless Position Monitor

Instruction Manual

This procedure is used to 'swap out' a depleted power module with a new power module without having to remove

power from the device. It requires two test leads with banana plug connectors and micro-plunger clips and a new

power module. This allows the device to maintain operation and avoids disrupting the wireless network.

Note

A Hot Swap parts kit is required for this procedure. Contact your Emerson sales office or Local Business Partner for kit information.

Note

Refer to the 4320 instruction manual (D103621X012), available from your Emerson sales office or Local Business Partner, or at

www.Fisher.com for all other information regarding the 4320 wireless position monitor.

This supplement also pertains to TopWorx™ 4310 Wireless Position Monitors (Supported Status). See instruction manual

D103622X012,available at www.Fisher.com, for information regarding the 4310 wireless position monitor.

WARNING

This procedure can only be performed when the position monitor is located in a non-hazardous location. Performing the

Hot Swap procedure in a hazardous area could result in personal injury or property damage.

Refer to figure 1.

1. Attach the banana plug connector end of the test leads to the new power module, taking care to prevent the wires

from shorting.

2. Connect the clips to to the WP2/WP3 Backup Power Terminals on the main board.

3. Loosen the four self tapping screws (see figure 2) and remove the depleted power module.

4. Position the new power module over the connections and insert on to the main board. The banana plug connector

end of the leads will come loose from the new power module.

5. Remove the clips from the WP2/WP3 Backup Power Terminals.

6. Tighten the four self tapping screws to a torque of 0.282 N•m (2.5 lbf•in) to ensure that the power module is

secured properly.

7. Close the cover and tighten the instrument cover screws to a torque of 5.6 to 6.7 N•m (50 to 60 lbf•in).

Instruction Manual Supplement

D103856X012

4320 Wireless Position Monitor

January 2018

Instruction Manual Supplement

D103856X012

4320 Wireless Position Monitor

January 2018

Figure 1. Hot Swap

ATTACH BANANA

PLUG CONNECTORS

TO NEW POWER

MODULE ASSEMBLY

ATTACH CLIPS TO

WP2/WP3 BACKUP

POWER TERMINALS

TEST LEADS WITH

BANANA PLUG

CONNECTORS AND

MICRO-PLUNGER CLIPS

X0558

X0552

SELF TAPPING SCREWS (4)

COVER SCREWS

Figure 2. Wireless Position Monitor with Battery Sourced Power Modules

Emerson Automation Solutions

Marshalltown, Iowa 50158 USA

Sorocaba, 18087 Brazil

Cernay, 68700 France

Dubai, United Arab Emirates

Singapore 128461 Singapore

www.Fisher.com

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not

to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are

governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such

products at any time without notice.

Fisher and TopWorx are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson

Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their

respective owners.

Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance

of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Autres manuels pour Fisher 4320

Table des matières

Autres manuels Emerson Moniteur

Emerson

Emerson RXi Manuel utilisateur

Emerson

Emerson E2 Manuel utilisateur

Emerson

Emerson 818-9022 Manuel utilisateur

Emerson

Emerson Rosemount 2230 Manuel utilisateur

Emerson

Emerson Fisher 4320 Manuel utilisateur

Emerson

Emerson ECD-002 Manuel utilisateur

Emerson

Emerson Fisher 4320 Manuel utilisateur

Emerson

Emerson TopWorx 4310 Manuel utilisateur

Emerson

Emerson Liebert TM115 Instructions de montage

Emerson

Emerson FSD Manuel utilisateur

Emerson

Emerson Rosemount 928 Manuel utilisateur

Emerson

Emerson Dixell XR75CX Series Manuel utilisateur

Emerson

Emerson QuickPanel+ IC755CxS06RDx Manuel utilisateur

Emerson

Emerson PACSystems RXi Panel PC Manuel utilisateur

Emerson

Emerson Fisher 4320 Manuel utilisateur

Emerson

Emerson Rosemount 2230 Manuel utilisateur

Emerson

Emerson AMS 6500 Manuel utilisateur

Emerson

Emerson Rosemount Analytical OPM 4000 Manuel utilisateur

Emerson

Emerson LC195EM9 B Manuel utilisateur

Emerson

Emerson 818-7235 Manuel utilisateur

Emerson

Emerson ROSEMOUNT TankRadar REX RDU 40 Manuel utilisateur

Emerson

Emerson AMS Wireless Vibration Monitor Manuel utilisateur

Emerson

Emerson MicroCEM Manuel utilisateur

Emerson

Emerson Machinery Health CSI 6500 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation