Emerson PACSystems RX3i IC695CPE330 Manuel utilisateur

PACSystems™ RX3i64MB CPU

w/EthernetIC695CPE330QuickStart

Guide

GFK-2941K

Sept2019

 
 
i PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K 
Contents 
User Features................................................................ 3 
Switches ..................................................................... 5 
Light-EmittingDiode Indicators (LEDs)...................................... 7 
Status Indicators ..................................................................................................7
Ethernet Ports ....................................................................................................10 
Hardware Installation...................................................... 12 
Initial Checks ......................................................................................................12 
Installation Location...........................................................................................12 
Installation in Hazardous Areas ..........................................................................13 
Class 1 Division 2 Groups ABCD .........................................................................13 
ATEX Zone 2.......................................................................................................14 
Grounding..........................................................................................................14 
Module Start-up ........................................................... 15 
You Will Need: ...................................................................................................15 
Basic Installation Steps.......................................................................................16 

 
 
ii PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K 
Redundancy Configuration ................................................................................17 
PROFINET Controller Configuration ...................................................................18 
Backward Compatibility with CPU320/CRU320/CPU315 ..................................18 
Removable Data Storage Device (RDSD) ...........................................................21 
Periodic Maintenance ..................................................... 21 
Real-Time Clock Battery.....................................................................................21 
Spare Parts .........................................................................................................23 
Additional Information .................................................... 23 
 
 

3 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K

User Features

The PACSystems™RX3i CPE330 is a richly featured programmable

controller CPU equipped with 64 Mbytes of built-in program memory and

two independent high-speedEthernet interfaces. It isideallysuited for

multi-tier communications andfor synchronizinglarge amounts of data.

Itsmetal housing provides superior noise immunity.

The CPE330 is programmed andconfigured over Ethernet via PAC

Machine Edition™(PME) software. It resides in the RX3i main rack and

supports all RX3i I/O and Intelligent Option modules, up to 32K I/O

points.

▪Supports an updated OPC stack and certificate management

▪Supports PME’s new GUI management interface for OPC UA configuration

integration (start, stop, restart, clear, and provisioning mode)

▪Supports the new PAC Security tool available for certificate trust

management for clients and servers

▪Supports RX3i Hot Standby Redundancy CPU with PROFINET®I/O using

embedded PROFINET or using rack-mounted IC695PNC001 PROFINET

Controllers.

▪Supports RX3i Hot Standby Redundancy with Ethernet (EGD) & Genius I/O.

▪Enabled simplex PROFINET I/O controller with support for up to 32 I/O

devices and update rates of 1 –512 ms. I/O device update rates of 8 ms

4 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K

and faster are possible with 16 or fewer devices. When there are more than

16 devices configured, update rates of 16 ms and higher are available.

▪Supports the Remote Get HART®Device Information COMMREQ, which

allows the user application to read information from a HART device

connected to an RX3i Analog module in an IC695PNS001 RX3i PROFINET

Scanner. A UDFB that automates the COMMREQ control logic is available for

download. (Refer to New Features and Enhancements for additional

information.)

▪Configured with Sequence of Events recording through the Embedded

PROFINET Controller when used with up to four IC695PNS101 Advanced

PROFINET Scanner modules. A RX3i SoE system supports events from up to

512 SoE input points with a system storage buffer for up to 128,000 events at

a maximum rate of 400 events per second per PNS101. Each PNS101

supports SoE recording with IRIG B time synchronization of events accurate

to 1ms and buffers up to 4000 events from up to four IC694MDL660

32 Circuit Discrete Input modules. Unmodulated IRIG B time signals are

decoded by the PNS101 using either an IC695HSC304 or IC695HSC308 High

Speed Counter Module. SoE recording is available in both simplex and

redundant PROFINET systems.

▪Supports programming in Ladder Diagram, Structured Text, Function Block

Diagram, or C.

▪Contains 64 Mbytes of configurable data and program memory.

▪Supports auto-located Symbolic Variables that can use any amount of user

memory.

5 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K

▪Contains reference tables include 32k bits for discrete %I and %Q and up to

32k words each for analog %AI and %AQ. Bulk memory (%W) also supported

for data exchanges.

▪Supports up to 768 program blocks. Maximum size for a block is 128KB.

▪Configured to display serial number and date code in PME Device Information

Details.

▪Configured for Coordinated Universal Time (UTC) and Day Light Savings Time

(DST) support.

▪Operating temperature range 0 C to 60 C (32 F to 140 F).

▪Compliant with EU RoHS Directive 2002/95/EC using the following

exemptions identified in the Annex: 7(a), 7(c)-I and III, and 15.

Switches

The Run/Stop switch andRDSD UPLD andRDSD DNLD pushbuttons are

located behind the protectivefront door. Switch operationis given in the

followingtable.

The Run/Stop switch is enabled by default; it can be disabled in the PME

Hardware Configuration (HWC) settings. The memory protection function

of this switch can be disabled separately in HWC. The memory protection

functionality is disabled by default.

6 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K

RDSD

Pushbuttons

Function

RDSD UPLD

Loads user program or data fromCPU to RDSD.

RDSD DNLD

Stores user program or data fromRDSDto CPU.

Run/Stop

Swi tch Position

A three-positionswitch which operates as follows:

CPU and Sweep Mode

Mem ory Protection

Run I/O

The CPU runswith I/O

sweep enabled.

User program memory is read

only.

Run

The CPU runs with

outputs disabled.

User program memory is read

only.

Stop

The CPU isnot allowed

to go into Run mode.

User program memory can be

written.

7 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K

Light-EmittingDiode Indicators(LEDs)

Status Indicators

LED

LED State

OperatingState

CPU OK

Green

CPU has passed itspower-updiagnosticsand

is functioningproperly. (After initialization

sequence is complete.)

Off

Power isnot applied, or CPU has a problem,

which may be indicated by blink pattern.

Blinking

Other

LEDsoff

CPU in Stop-Halt state; possible watchdog

timer fault. If the programmercannot

connect, cycle power with charged Energy

Pack attached and refer to fault tables.

CPU OK

Amber

CPU indicating CPU320/CRU320

compatibility setting

FORCE

Amber

Refer to the section, Compatibility with

CPU320/CRU320/CPU315for more

information.

RUN

Blinking

unison

CPU is updatingan internal programmable

hardware device.

OUT EN

8 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K

LED

LED State

OperatingState

RUN

Green

CPU isin Run mode.

Off

CPU isin Stop mode.

OUT EN

Green

Output scan is enabled.

Off

Output scan is disabled.

FORCE

Amber

Override is active on abit reference.

Off

No Overridesactive in I/OReference Tables.

RDSD

Green

USB Device detected (No Activity)

Blinking

Green

Port activity detected on USB Interface

Off

No port activity detected on USB Interface

On Red

RDSD Failure

Blinking

Red

Target name mismatch: Presssame RDSD

pushbutton again to dismiss.

SYS FLT

On Red

CPU isin Stop/Faulted mode: a fatal fault has

occurred.

Off

No fatal faults detected.

9 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K

CPE330 Ethernet Indicators

LED

LED State

OperatingState

LINK

(upper)

Green

The corresponding link isphysically

connected.

Blinking

Green

Traffic isdetected at the corresponding port.

Off

No connection detected at corresponding

port.

1Gbps

(lower)

Amber

(LAN1)

Corresponding networkdata speed is 1

Gbps.

Green

(LAN2)

Off

Corresponding network dataspeedis 100

Mbps or 10 Mbps.

Table des matières

Autres manuels Emerson Contrôleurs

Emerson

Emerson Asco Sentronic LP 617 Series Manuel utilisateur

Emerson

Emerson EL-O-Matic F-Series Manuel utilisateur

Emerson

Emerson REGAL 3F Manuel utilisateur

Emerson

Emerson dixell WING XW260L Schéma de câblage

Emerson

Emerson FISHER P650 Manuel utilisateur

Emerson

Emerson AVENTICS 645 Manuel utilisateur

Emerson

Emerson FISHER 627F Manuel utilisateur

Emerson

Emerson Fisher L2e Guide de configuration

Emerson

Emerson FISHER FIELDVUE DLC3010 Manuel utilisateur

Emerson

Emerson Fincor 2330MKII Series Document technique

Emerson

Emerson Fisher 585CLS Manuel utilisateur

Emerson

Emerson Bettis RGS Q Series Manuel utilisateur

Emerson

Emerson Fisher 585C Series Manuel utilisateur

Emerson

Emerson Fisher EZR series Manuel utilisateur

Emerson

Emerson Digitax ST Manuel utilisateur

Emerson

Emerson Vilter Vission 20/20 Manuel d'utilisation

Emerson

Emerson Fisher HSR Series Manuel utilisateur

Emerson

Emerson XWEB300D Manuel utilisateur

Emerson

Emerson Fisher FIELDVUE DVC6200 SIS Manuel utilisateur

Emerson

Emerson BETTIS E796 2000 M2CP Manuel utilisateur

Emerson

Emerson UNIDRIVE M600 Manuel utilisateur

Emerson

Emerson Aventics Sentronic PLUS 614 Manuel utilisateur

Emerson

Emerson Fisher 67D Series Manuel utilisateur

Emerson

Emerson Vilter MicroVission Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur

3M MicroTouch EX113 Manuel utilisateur