Emerson BO60 Manuel utilisateur
ELECTRIC WINE BOTTLE OPENER
OWNER S MANUAL
BO60
Visit our web site at www.emersonradio.com
UNAUTHORIZED MODIFICATIONS TO THIS DEVICE COULD VOID
THE USER S AUTHORITY TO OPERATE IT.
EMERSON
PART NO.: BO60-12172008-01 Printed in China
PLEASE NOTE THESE IMPORTANT SAFETY POINTS
WARNING. When using this electrical appliance the
following safety precautions should be taken to reduce
the risk of fire, electric shock and personal injury.
Read all the instructions before use and save them for future
reference.
When using or recharging the corkscrew keep your work surface
clean and free from potential hazards.
Never use the corkscrew in damp areas or near water, sinks or
taps.
Never submerge the corkscrew or charger.
For indoor use only. Do not expose the corkscrew or charging unit
to rain or other extreme conditions.
Never force the corkscrew onto a bottle or attempt to speed up the
mechanism. The corkscrew will work best when it is operated at its
intended speed.
Do not touch or adjust the corkscrew's mechanism or the corkscrew
spiral. Only hold the corkscrew by the plastic housing.
Do not attempt to open bottles if the switch is not working correctly.
Keep away from children. This is not a toy.
Do not attempt to open the corkscrew or the recharging unit. It has
no serviceable parts. In event of malfunction in this time please
contact our customer services department .
Do not attempt to operate if the corkscrew, cord, plug or recharging
unit is damaged, dropped or malfunctions.
Only recharge the corkscrew using the recharging unit and power
cord supplied.
Never remove the plug from the socket by pulling the power cord.
1
LIMITED WARRANTY
Emerson radio Corp. warrants manufacturing defects in original
material, including original parts and workmanship, under normal
use and conditions, for a period of ninety(90) days from the date
of original purchase in the U.S. With your dated proof of purchase,
We will provide repair service at no charge for labor and parts
(excluding battery)at an authorized Depot Repair Facility, or replace
the productin our discretion.
For repair or replacement, pack your unit in a padded box, enclose
your check or money order payable to Emerson Radio Corp. in the
amount of $5.00(not required by California residents)to cover
shipping and handling costs, and enclose a copy of your proof of
purchase. Send your unit to:
This warranty does not cover damage from negligence, misuse,
abuse, accident, failure to follow operating instructions,
commercial use, rental, repairs by an unauthorized facility, or
products purchased, used, serviced or damaged outside of the
United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898P
7
The serial number of your system is located on a label on the bottom cabinet.
Please take a moment now to locate the serial number and write the number in
the space provided below. You may be asked to provide this number when
calling for product service.
Emerson Radio Corp.,
5101 Statesman Drive,
Irving,TX 75063
We recommend that you charge your corkscrew for at least
16 hours before using it for the first time. Please follow the
instructions for recharging
below:
How to operate the corkscrew
Before using the corkscrew, you must remove any foil from the top of
the bottle using the foil cutter provided.
The corkscrew is operated by a one simple switch. The switch has two
functions.
Press the lower part of the switch to remove a cork from a bottle. Press
the upper part of the switch to release a cork from the mechanism after
you have removed it from the bottle. (See Pic 1)
Recharging your corkscrew
Plug one end of the adaptor cord into the base of the recharging unit and
the other end into a main socket. Place the corkscrew into recharging unit,
ensuring that it is firmly in position and is fully engaged with the recharging
connectors. It will take approximately 12 hours to recharge your corkscrew.
When the corkscrew is fully recharged it can be used to open approximately
30 bottles.
WINE OPENERWINE OPENER
SWITCH
CHARGING STANDCHARGING STAND
LED LIGHTLED LIGHT
ADAPTORADAPTOR
2
(Pic.1)
up
down
FOIL CUTTERFOIL CUTTER
Place the corkscrew on the top of the wine bottle. Ensure that it remains
as upright as possible at all the times. If you hold the
corkscrew at an angle to the bottle,
it will not remove the cork properly.
(See Pic 2).
1.
2.
3.
Hold the corkscrew firmly and depress the lower part of the switch.
The corkscrew spiral will turn in a clockwise direction and enter the
cork, then gradually remove it from the bottle. When the corkscrew
mechanism stops, the cork has been fully removed from the bottle.
Lift the corkscrew away from the bottle.
To remove the cork from corkscrew,
the cork.
(See Pic 3).
hold the cork firmly and depress the
upper part of the switch. The spiral
will turn in an anti-clockwise direction
and release
(Pic.2)
3
Always return the corkscrew to the recharging unit when you have
finished with it. This will protect the mechanism while it is not in use.
4.
(Pic.3)
Note-It has been note d the automatic corks crew may experience
problems with a small percentage of plastic/synthetic corks and
undersized corks, if in this case the cork should be removed
manually.
SERVICE
CALL TOLL FREE:1-800-695-0098
TO FIND THE LOCATION AND
PHONE NUMBER OF YOUR
NEAREST SERVICE CENTER
PERMITTED TO PERFORM
WARRANTY
TO FIND THE LOCATION AND
PHONE NUMBER OF YOUR
NEAREST SERVICE CENTER
PERMITTED TO PERFORM
WARRANTY
Emerson Radio Corp.,
Consumer affairs Dept.,
5101 Statesman Drive,
Irving, Tx75063.
Batteries may not be disposed of in municipal waste.
Recycle or dispose in an environmentally sound manner.
Laws in most areas prohibit the incineration, land filling, or
mixing of nickel-metal hydride batteries with municipal
solid waste.
Return batteries to a federal or state
approved nickel-metal hydride
battery recycling center. Contact
your local waste management officials
for other information regarding
the environmentally sound collection,
recycling and disposal of batteries.
For further assistance or proper disposal,
please call 1-800-8-BATTERY OR 1-800-530-4508
6
MH
REMOVING THE RECHARGEABLE BATTERIESREMOVING THE RECHARGEABLE BATTERIES
Your bottle opener is equipped with nickel-metal hydride
(Ni-MH) batteries. If they are defective or dead,
or the unit comes to the end of its useful life,
remove the rechargeable batteries as described
below for environmentally safe disposal.
1. The 6 screws can be twisted by
pressing against the unit back
house and twisting the handle in
a counter-clockwise direction.
2. Once loose, You can open the expose
unit back housing and the battery.
(Pic.1)
(Pic.2)
4
3.
Using a common household tool, such as scissors or wire
cutters, carefully cut through the wires attached to each
end of the battery. The battery is now free for correct
disposal.
Pull the battery out of the compartment.
(Pic.3)
ENVIRONMENTAL NOTICE -
NICKEL-METAL HYDRIDE BATTERY
This product contains a nickel-metal
hydride (Ni-MH) battery that must be
recycled or disposed of properly.
This
properly.
5
Table des matières
Autres manuels Emerson ouvre-boîte
Manuels ouvre-boîte populaires d'autres marques
Clatronic
Clatronic DO 2852 Caractéristiques techniques
Coopers
Coopers Can Magic Manuel utilisateur
Black & Decker
Black & Decker LIDS OFF JW260 Instructions d'installation
Oster
Oster 3118 Manuel utilisateur
Black & Decker
Black & Decker Gizmo EM200 Series Instructions d'installation
Hamilton Beach
Hamilton Beach 76606 - Pop-Top Electric Can Opener Manuel utilisateur
Kalorik
Kalorik USK DO 36918 Manuel utilisateur
Black & Decker
Black & Decker CO451 Instructions d'installation
Hamilton Beach
Hamilton Beach Walk-n-Cut 76503 Manuel utilisateur
Hamilton Beach
Hamilton Beach 76370 - Extra Tall Can Opener Manuel utilisateur
Kenwood
Kenwood CA-P70 Manuel utilisateur
Hamilton Beach
Hamilton Beach Open Ease Can Openers Manuel utilisateur
