Elta ELM-2114 Manuel utilisateur
UNCLASSIFIED
1
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Operation Manual Subject to be Changed without Notice
Installation Manual
PERSISTENT PERIMETER
DETECTION RADAR
ELM-2114
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
2
TABLE OF CONTENTS
1.GENERAL..........................................................................................................................................3
2.KITCONTENTS..................................................................................................................................4
2.1.TRANSCEIVER:................................................................................................................................................4
2.2.POE(CUSTOMERSUPPLY)...............................................................................................................................4
2.3.INSTALLATIONREMOVABLEMEDIA....................................................................................................................5
3.SYSTEMMAPSINSTALLATION/SETUP..............................................................................................6
3.1.MANUALINSTALLATION...................................................................................................................................6
3.2.AUTOMATICINSTALLATION...............................................................................................................................6
4.ELM‐2114OPERATINGSYSTEMINSTALLATION..................................................................................7
4.1.ELM2114–OPERATINGSYSTEMINSTALLATION(HMI)........................................................................................7
4.2.RADARCOMSETAPPLICATION........................................................................................................................11
5.RADARCONFIGURATIONSETUP.....................................................................................................15
5.1.SETTINGTHERADARLOCATION.......................................................................................................................15
6.MECHANICALDESCRIPTION............................................................................................................17
6.1.MECHANICALSPECIFICATION..........................................................................................................................17
6.2.SIDEVIEWANDINSTALLATIONDIRECTION..........................................................................................................18
7.MECHANICALINSTALLATIONGUIDELINES:.....................................................................................19
7.1.INSTALLATIONHEIGHT:..................................................................................................................................19
7.2.ROIOBSERVATIONREQUIREMENT:..................................................................................................................19
7.3.TWORADARSINSTALLATION‐DISTANCECALCULATION........................................................................................19
8.COMPONENTSINTERCONNECTION.................................................................................................21
9.SAFETYINSTRUCTIONS...................................................................................................................22
9.1.ELECTRICALSAFETY.......................................................................................................................................23
9.2.RADHAZSAFETY.........................................................................................................................................23
10.POWERREQUIREMENTS.................................................................................................................24
11.RECOMMENDED20[M]CABLE[CANBEPURCHASESEPARATELY]....................................................25
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
3
1. GENERAL
This Installation Manual describes installation procedures for the ELM-2114 Persistent
Perimeter Detection Radar.
The ELM-2114 persistent perimeter detection radar is an advanced high-resolution radar with
unique and outstanding capabilities. Featuring simultaneous multi beam technology, it
provides persistent surveillance and instantaneous target tracking over the entire region of
interest (ROI), allowing an immediate and simultaneous detection, monitoring and tracking of
all moving ground targets in the ROI, in tough weather conditions.
The main feature of the ELM-2114 is extremely low false alarm rate, crucial for perimeter
monitoring. It is equipped with a stationary (non-rotating) planar array covering (Staring at) an
azimuth sector of 90°, with detection range capabilities of (up to) 500 m meters for a moving
person, and up to 1000 m meters for moving vehicles, characterized by high reliability and
maintenance-less hardware.
Unlike most Radars, this Radar does not have a scanning (mechanical or electronic) beam but
rather covers all the area of interest simultaneously, using the Multibeam principle.
The Radar has the capability to be interface to a visual aid (day and/or night) (option) which
can be steered automatically from the display station, allowing the operator to classify targets
in the area of Interest.
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
4
2. KIT CONTENTS
The ELM-2114 Radar kit contains three (3) components:
2.1. Transceiver:
The transceiver module contains an RF front section and a digital circuit. The Transceiver
includes a single POE plug.
The Transceiver unit is installed on a pole, mast or a tripod, using dedicated mechanical
adapter that can be purchase separately.
Figure 1: Mechanical Adapter
2.2. POE (Customer Supply)
The Radar receives 48VDC power through a POE unit, which can be provided through
dedicated POE unit, or customer standard network equipment, which already includes POE.
Figure 2: POE
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
5
2.3. Installation Removable Media
The enclosed installation Removable Media contains the radar operating application.
The ELM-2114 application supported by the following Operating Systems:
Win 7 / Win 10 pro.
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
6
3. SYSTEM MAPS INSTALLATION / SETUP
3.1. Manual installation
The System application displays raster and vector maps.
System Maps installation requires the following steps:
Get raster maps, which are Orth-photo maps of the Geo TIFF format, uses WGS84
datum: (GeoTIFF format is georeference raster imagery, WGS84 datum is the World
Geodetic System provided in 1984) in resolution of 1 to 5 meters per pixel.
To obtain real measurements, verify that the Ortho-photograph is an aerial photograph
geometrically corrected ("orthorectified"), such that the scale is unified and it has no
distortion.
The map coverage area should be 1Km x 1Km square for the region of interest, while
the Radar placed at the corner of square and the surveillance area is within the square.
Place the map file placed in the Maps directory on your operation station.
3.2. Automatic Installation
TBD
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
7
4. ELM-2114 OPERATING SYSTEM INSTALLATION
The following description specifies the ELM-2114 Operation System installation.
Insert the Operating System installation media and follow the on screen installation guide
accordingly.
The installation includes two stages:
1. ELM2114 – Operating System Installation (HMI)
2. Radar Com Set Application - setting the radar network system communication
4.1. ELM2114 – Operating System Installation (HMI)
4.1.1. Welcome Screen
4.1.2. Installation Preparation screen
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
8
4.1.3. License Agreement
4.1.4. Operating System Installation Directory
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
9
4.1.5. Installation Readiness Screen
4.1.6. Installation Process Status
UNCLASSIFIED
This document contains proprietary information of ELTA System Ltd.
ELM-2114 Installation Manual Subject to Change without Notice
10
4.1.7. Installation Completion Screen
4.1.8. Uninstall
Table des matières
Manuels Radar populaires d'autres marques
SAW D2L
SAW D2L Valentine One Gen2 Manuel utilisateur
Raymarine
Raymarine Raytheon R20X Manuel utilisateur
Simrad
Simrad CA34 Manuel utilisateur
Endress+Hauser
Endress+Hauser Micropilot FMR67B Caractéristiques techniques
Endress+Hauser
Endress+Hauser Levelflex M FMP45 Manuel utilisateur
ECHOMAX
ECHOMAX Active-X-Band Manuel utilisateur
