ELS LIFT 5.5 Junior SP Manuel utilisateur

USER MANUAL EL SERIES 04.04.2018

USER MANUAL

Rev. No: 01

JUNIOR5.5 SP

Serial Number: 18131514 –18XXXXX

USER MANUAL EL SERIES 04.04.2018

Important

Please read carefully and understand the safety

principles and operating instructions before

using this machine, and observe them.

Only trained and authorized persons are

allowed to operate this machine.

This guide should be considered as an integral

reference and should always accompany the

machine.

Please contact us if you have any questions.

Contact Details:

URL: www.elslift.com

[email protected]

TABLE OF CONTENTS

INTRODUCTION ........................................... 2

Description of Symbols and Hazard Legends

.................................................................... 5

General Safety............................................ 7

Location of Safety Indicators................... 7

Personal Safety........................................... 8

Safety of the Work Area.............................. 8

Battery Safety............................................ 12

Description................................................ 14

Control Panels .......................................... 16

Platform Control Panel.......................... 16

Ground Control Panel ........................... 17

Inspection.................................................. 18

Inspection at the Ground Control Panel 20

Inspection at the Platform Control Panel

.............................................................. 20

Instructions for Use................................... 23

Operation from the Ground Control Panel

.............................................................. 23

Operation from the Platform Control Panel

.............................................................. 23

Charging the Battery............................. 24

Transport and Lifting Instructions ............. 25

Securing to Truck or Trailer for Transit. 26

Lifting the Machine with a Forklift.......... 27

Maintenance Instructions...................... 28

Maintenance.............................................. 29

Periodic Maintenance Schedule ........... 29

Fault Codes and Troubleshooting............. 30

Specifications............................................ 35

USER MANUAL EL SERIES 04.04.2018

INTRODUCTION

Owners, Users and Operators:

You have purchased an Access Lift. Thank you

for preferring our machines.

If you exactly observe the maintenance and use

instructions, you will definitely get the best

performance.

The purpose of the guide is to help you achieve

this.

Please note the following critical points:

•You must comply with the safety

instructions relating to the machine

itself, its operation and the surrounding

area.

•You must use the machine within

prescribed performance limits.

•Proper periodic maintenance is

essential for maximum lifetime.

During and after the warranty period, ELS after-

sales service is always at your disposal.

In case of an inquiry or claim, please contact our

after-sales department and indicate the

machine type, serial number and operating

time.

When ordering consumables or spare parts,

please additionally use the “Spare Parts”

catalogue to obtain replacement parts secured

by excellent performance guarantee. This guide

is delivered with your machine.

USER MANUAL EL SERIES 04.04.2018

Danger

Failure to observe the instructions and safety

rules in this manual will result in death and

serious injury.

Do not operate this machine unless the

following conditions are met:

✓Get familiar with and implement the

safe operation principles illustrated in

this manual.

1. Avoid dangerous conditions.

Get familiar with and understand the safety

rules before proceeding with the next

section.

1. Always perform a pre-operation

inspection.

2. Always perform function tests before

operation.

3. Examine the service area.

4. Use this machine appropriately and

only for its intended purpose.

✓Read and understand the

manufacturer's instructions and safety

rules, safety and operating manuals,

and machine labels.

✓Read, understand and observe the

employer's safety rules and workplace

regulations.

✓Read, understand and comply with all

applicable legal regulations.

✓Make sure that you are appropriately

trained to safely operate this machine.

Classification of Hazards

The labels on this machine contain various

symbols, colour codes and warning statements

as follows:

Safety warning symbols warns you of potential

personal injuries.

Observe all safety statements

in this symbol to avoid potential

injury or death.

Otherwise, hazards would

occur, resulting in death or

severe injury.

Indicates a hazardous

condition which, in case of

failure to observe the warning

statement, may result in mild to

moderate injuries.

Indicates a property damage.

For information purposes.

Authorized persons should take the necessary

measures to keep these labels in good and

legible condition. Upon demand, additional

labels should be procured from ELS.

USER MANUAL EL SERIES 04.04.2018

Intended Use

This machine is designed to lift workers

together with the accompanying tools and

materials to access an aerial area.

Maintenance of Safety Signs

Replace all defective or damaged safety signs.

Always prioritize the operator safety. Use mild

soap and water to clean the safetysigns. Do not

use solvent-based cleaning agents as they may

damage the material used to manufacture the

safety sign.

USER MANUAL EL SERIES 04.04.2018

Description of Symbols and Hazard Legends

4700090

4700131

4700049

4700056

4700018

4700064

4700053

4700028

4700038

4700051

4700052

4700089

4700061

4700130

4700129

4700017

USER MANUAL EL SERIES 04.04.2018

List of Symbols and Hazard Legends

•4700090 →Crush Hazard

•4700131 →Maximum Tire Load

•4700049 →Maintenance Bar

•4700056 →Manuals Control

•4700018 →Production Place

•4700064 →No Smoking

•4700053 →Read the Operator’s Manual

•4700028 →Forklift Forks Pocket

•4700038 →Lanyard Attachment Point

•4700033 →Battery Charger Plug

•4700061 →Crush Hazard

•4700130 →Tiedown

•4700017 →Usage Advices

•4700129 →Inside and Outside Terms of Use

USER MANUAL EL SERIES 04.04.2018

General Safety

Location of Safety Indicators

USER MANUAL EL SERIES 04.04.2018

Personal Safety

Anti-Fall Protection

When operating the machine, anti-fall protection

must be in place.

Users in the vehicle must wear a safety belt or

safety strap in accordance with the legal

regulations. Hook the seat belt to the bolt on the

platform.

Operators must comply with employer, job site

and governmental rules regarding the use of

personal protective equipment.

All anti-fall protection equipment must comply

with applicable legal regulations and must be

inspected and used as per the manufacturer's

instructions.

Safety of the Work Area

Electrocution Hazards

This machine is not electrically

insulated and will not provide

protection from contact with or

proximity to electrical current.

Maintain safe distances from

electrical power lines and

apparatus in accordance with

applicable governmental

regulations and the following

chart.

Line Voltage

Minimum Safe

Approach

Distance

0 –50 KV

3.0 m

50 –200 KV

4.6 m

200 –350 KV

6.1 m

350 –500 KV

7.6 m

500 –750 KV

10.6 m

750 –1000 KV

13.7 m

Allow for platform movement, electrical line

sway or sag and beware of strong or gusty

winds.

Keep away from the machine if it contacts

energized power lines. Personnel on the

ground or in the platform must not touch or

operate the machine until the power lines are

de-energized.

Do not operate the machine during lightning or

storms.

Do not use the machine as a ground for welding.

USER MANUAL EL SERIES 04.04.2018

Tip-over Hazards

Occupants, equipment and materials must not

exceed the maximum platform capacity.

Weight of optional parts and accessories such

as pipe skids and panel skids reduce the

nominal platform capacity and therefore should

be taken into account when calculating the total

platform load. Refer to the labels delivered with

the optional parts and accessories.

If you are using accessories, read, understand,

and observe the accompanying labels and

instructions.

Do not alter or disable the limit switches.

Do not raise the platform unless the machine is

on a firm, level surface.

Do not depend on the tilt

alarm as a level indicator.

The tilt alarm sounds on

the chassis only when the

machine is on a slope.

If the tilt alarm sounds:

Lower the platform

carefully. Move the

machine to a firm, level

surface.

When raising the platform,

observe the permissible

manual force values and

number of persons

specified below.

Do not operate the

machine in strong or gusty

winds. Do not increase the

surface area of the

platform or the load.

Increasing the area exposed to the wind will

decrease machine stability.

Use extreme care and slow speeds while

driving the machine in a stowed position across

uneven terrain, debris, unstable or slippery

surfaces and near holes and drop-offs.

Do not drive the machine on or near uneven

terrain, unstable surfaces or other hazardous

conditions with the platform raised.

Do not push off or pull toward any object outside

of the platform.

Maximum Manual Force

Maximum

Number of

Persons

400 N indoor use only

200 N outdoor use

Do not alter or disable machine components

that in any way affect safety and stability.

Do not replace items critical to machine stability

with items of different weight or specification.

Do not overload the platform.

Do not modify or alter an

aerial work platform without

prior written permission

from the manufacturer.

Mounting attachments for

holding tools or other materials onto the

platform, toeboards or guard rail system can

increase the weight in the platform and the

surface area of the platform or the load.

Do not place or attach fixed or overhanging

loads to any part of this

machine.

Do not place ladders or

scaffolds in the platform or

against any part of this

machine.

Table des matières

Autres manuels ELS LIFT Système de levage

ELS LIFT

ELS LIFT EL 14 Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur