Elo TouchSystems ET1502LM Manuel utilisateur

USER MANUAL

Elo Touch Solutions

USER MANUAL, ET1502LM

UM600536 Rev C

User Manual ET1502LM

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or

by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.

Disclaimer

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) make no representations or warranties

with respect to the contents herein, and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise

this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.

Trademark Acknowledgments

Elo, Elo (logo), Elo Touch, EloTouch Solutions and TouchPro are trademarks of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.

User Manual ET1502LM

Table of Contents

Section 1: Introduction ............................................................................................................................................................................................................................... 4

Section 2: Installation................................................................................................................................................................................................................................. 5

Section 3: Mounting ................................................................................................................................................................................................................................. 10

Section 4: Operation ................................................................................................................................................................................................................................ 12

Section 5: Technical Support................................................................................................................................................................................................................... 18

Section 6: Safety & Maintenance............................................................................................................................................................................................................. 20

Section 7: Regulatory Information............................................................................................................................................................................................................ 21

Section 8: Warranty Information............................................................................................................................................................................................................... 30

User Manual ET1502LM

Section 1: Introduction

Product Description

Your new touch monitor combines the latest developments in touch technology and display design with reliability for use in high-traffic environments.

This touch monitor incorporates a 24-bit color, active matrix thin-film-transistor LCD panel to provide high-quality display performance. Supports full HD

1920 x 1080. Its LED backlight significantly reduces power consumption and eliminates the need for mercury (compared to CCFL-backlit panels). Other

features that enhance this LCD monitor’s performance are USB Type-C (touch and video), Plug & Play compatibility, remote on-screen display (OSD)

controls and flexible mounting options.

Part Number

Part Description

Touch Technology

Surface Treatment

Touch Interface

Color

E542617

ET1502LM-2UWA-1-BL-G

PCAP

Anti-glare

USB

Black

E542808

ET1502LM-2UWA-1-WH-G

PCAP

Anti-glare

USB

White

E967064

ET1502LM-2UWA-1-BL-NS-G

PCAP

Anti-glare

USB

Black

E967255

ET1502LM-2UWA-1-WH-NS-G

PCAP

Anti-glare

USB

White

Precautions

Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your unit and prevent risks to user safety.

See the Safety & Maintenance Section for more information.

This manual contains information that is important for the proper setup and maintenance of the unit. Before setting up and powering on your new touch

monitor, read through this manual, especially the Installation, Mounting, and Operation Sections.

User Manual ET1502LM

Section 2: Installation

Unpacking the Touch Monitor

Open the carton and verify that the following items are present:

•

Touch monitor

•

Quick Install Guide

•

HDMI cable

•

Touch USB Cable (USB Type-A to Type-C)

•

Power brick (Elo P/N: E128201)

•

Europe power cord

•

North America power cord

•

EEI Label

•

2 x cable clamps, 2 x tie wraps, 3 x screws (M3x8mm) for cable clamps, 2 x screws (M3x10mm) for cable doors

User Manual ET1502LM

Stand version

The stand of the touchmonitor can be converted between two positions: the low profile “hostess” position and the high profile “upright” position.

The touchmonitor ships in the low profile “hostess” position.

Low profile (“hostess”) position

To convert the stand into the high profile “upright” position, secure the thumbscrews into the high or “H” screw-holes in the bottom of the base.

Upright position

To convert the stand into the low profile “hostess” position, secure the thumbscrews into the low or “L” screw-holes in the bottom of the base.

User Manual ET1502LM

Connector Panel

Note: Cable tie-down points can be used to tie down the cables with tie wraps. Simply loop the tie wraps through the cable tie-down points and around the

cable to secure cable connections.

User Manual ET1502LM

Touch Monitor Connections

Video Source with HDMI and Touch source with USB Type-C:

Connect one end of the HDMI to the monitor’s HDMI input connector and the other end to yourHDMI video source.

Connect the USB touch cable (USB Type-A to Type-C) between the monitor’s USB Type-C connector and your PC’s USB Type-A port. This cable only supports

USB2.0.

Connect the audio cable between the monitor’s Audio line-in and your audio source (you can also use built-in audio via your HDMI cable).

Connect the power adapter’s input connector to the power source. Connect the power adapter’s DC output connector to the monitor’s input power jack.

The touch monitor ships in an OFF state. Press the power button to turn it on.

Video Source with VGA and Touch source with USB Type-C:

Connect one end of the VGA-DB15-to-MICRO cable (sold separately Elo P/N: E710549) to the monitor’s VGA input connector and the other end to

yourVGA video source (tighten the video cable’s screws on the VGA connector for best performance).

Connect the USB touch cable (USB Type-A to Type-C) between the monitor’s USB Type-C connector and your PC’s USB Type-A port. This cable only supports

USB2.0.

Connect the audio cable between the monitor’s Audio line-in and your audio source.

Connect the power adapter’s input connector to the power source. Connect the power adapter’s DC output connector to the monitor’s input power jack.

The touch monitor ships in an OFF state. Press the power button to turn it on.

Video & Touch Source with USB Type-C:

Connect the USB Type-C to Type-C cable (sold separately Elo P/N: E710364) between the monitor’s USB Type-C connector and your PC’s USB Type-C port.

Connect the power adapter’s input connector to the power source. Connect the power adapter’s DC output connector to the monitor’s input power jack.

The touch monitor ships in an OFF state. Press the power button to turn it on.

Note:

1. USB Type-C pinout diagram shown on Monitor Specifications.

2. Suggest using Elo USB Type-C to Type-C (Elo P/N: E710364) cable to prevent any compatibility issues.

3. USB Type-C does not provide power but for video or touch function only.

User Manual ET1502LM

Installing Touch Technology Software Drivers

No additional drivers are required for your projected-capacitive touch monitor with Windows 7, Windows 10 and most versions of Mac OS X, Android or

Linux as it will use the built-in HID drivers in the Operating System. If the monitor is used with the Windows XP operating system, follow the steps below

to install the Windows XP touch driver.

To download the latest touch drivers:

1. Visit www.elotouch.com/Support/Downloads/Driver/DriverDownload/Default.aspx

2. Select the “Touch Drivers” from “Product Category” dropdown menu.

3. Select the operating system from “Operating System” dropdown menu.

4. Click on the driver version required for your touchscreen display.

User Manual ET1502LM

Section 3: Mounting

Rear VESA Mount

A four-hole 75x75mm and 100x100mm mounting pattern for M4 screws x 4, length 10mm is provided for fixing on the rear of the monitor.

Remove the stand using a Phillips screwdriver to access this mounting interface. The VESA FDMI-compliant counting is coded: VESA MIS-D,

75, C and VESA MIS-D, 100, C.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Elo TouchSystems Moniteur

Elo TouchSystems

Elo TouchSystems 1528L Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems 1545L Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems ET2200L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1725L Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Touch Solutions ET1902L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 4243L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems ET1903LM Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Elo Entuitive 3000 Series 1729L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1519LM Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1247L Series Guide de l'utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1767L Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems IDS 3 Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Elo Entuitive 3000 Series 2240L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems ET2294L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 2639L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1847L Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1541L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive ET1724L-7SWB-1-NL Manuel utilisateur

Elo TouchSystems

Elo TouchSystems ET2203LM Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 4200L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 4 I-Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1725L Series Manuel utilisateur

Elo TouchSystems

Elo TouchSystems 1939L Manuel utilisateur

Elo TouchSystems

Elo TouchSystems Entuitive 1925L Series Manuel de la liste des pièces

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation