Elite SC-2 Manuel utilisateur
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
ELITE SC 2
User manual
Version(March(2023
THIS PAGE IS NOT WRITTENINTENTIONALLY
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
1.FIRST STEPS
Congratulations on your purchase of the ELITE model SC 2 bandsaw and circular saws sharpening
machine.
Read this guide before you start.
The SC 2 is a bandsaws and circular saw blade automatic sharpening machine with low maintenan-
ce. For straight tooth and spaced straight tooth sharpening and setting in band saws from 10 up to
70 mm wide (0,4" to 2-3/4")
It also allows to sharpen steel or CV circular saw blades from 110 up to 600 mm (4-1/3" to 25,5")
This manual introduces you to the main functions of the grinder in order to avoid risks to your he-
alth or that may cause a breakdown or premature wear of the machine.
In case of any doubt, please contact us or one of our authorized distributors.
Informative Note: The use described in the manual of this circular saw blade sharpening machine
described therein may present some variations in use as our machinery is subject to possible cons-
truction modifications, depending on the incorporation of technological advances in our sharpening
equipment.
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
2.SAFETY
2.1.Safety regulations
Carefully observe and apply the following safety rules, not respecting these rules may cause perso-
nal injury or damage to the machine itself.
The installation and maintenance of the machine described in this manual must be carried out only
by operators who are familiar with its operation and have sufficient technical knowledge.
The ELITE sharpening machines of the SC 2 model range have been designed for the sharpening of
band and circular saw excluding any other type of operation.
DANGER HIGH VOLTAGE
DANGER OF ACCIDENT
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
DANGER DUE TO SPARK PROJECTION
WEAR PROTECTIVE SHOES
DANGER FROM SHARP TOOLS
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
USE HEARING PROTECTORS
These warnings do not include all possible risks that improper use of the machine could cause. For
this reason, the operator must proceed with prudence and observing the rules.
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
2.2.Use and storage of the instruction manual
This instruction manual must be read and understood by all personnel who come into contact with
the machine.
This manual is for:
• Indicate the correct use of the machine according to the type of work to be carried out.
• Provide the necessary instructions for the transport, adjustment and maintenance of the
machine.
• Facilitate the ordering of spare parts and information of risks.
Limits of use of the manual:
The machine is intended for professional use and therefore the experience of the operator is requi-
red and of vital importance.
Importance and conservation of the manual:
This manual must be considered part of the machine and must therefore be attached to it until the
end of its use.
Additional information and clarifications:
The user, owner or maintenance person can contact the manufacturer to request any additional in-
formation on the use of the machine and possible modalities for maintenance and repair interventi-
on.
Expiration of responsibility:
The manufacturer is considered exempt from any liability in the event of:
• Improper use of the machine
• Use of the machine by untrained persons
• Serious failures in scheduled maintenance
• Unauthorized interventions or modifications
• Use of non-original spare parts.
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
THIS PAGE IS NOT WRITTENINTENTIONALLY
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
2.3.Declaration of conformity
The company hereby Elite Sharpening Machines, SLU
C/Joan Oró, 27
ES-08635 Sant Esteve Sesrovires
declares that the product indicated below, based on its conception and construction, as well as the
version put on the market by our company, complies with the mandatory basic health and safety re-
quirements of the CE directive.
This declaration loses its validity in the event of unauthorized modifications to the product.
Product name: ELITE model SC 2
Product type: Automatic band and circular saws sharpening machine
Serial No.: ___________________
EC Directive Competences:
• EC Machinery Directive (2006/42/EC)
• European directive on electromagnetic compatibility (2014/30/EU)
• The protection purposes of the CE low voltage directive (2006/95/CE) were fulfilled
according to annex I, nr. 1.5.1 of the machinery directive 2006/42/EC
The technical documentation was compiled by Legal representative of the documentation:
Sergi Valls Gramunt
Joan Oró, 27
ES-08635 Sant Esteve Sesrovires
Date / manufacturer - Signature: ___________________
Signatory data: Sergi Valls Gramunt, manager
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
THIS PAGE IS NOT WRITTENINTENTIONALLY
Joan Oró, 27 Pol. Ind. Sesrovires- St. Esteve Sesrovires, BCN, España– +34 932 935 178 – [email protected]
Autres manuels pour SC-2
1
Table des matières
Autres manuels Elite Équipement industriel
