There maybe a few bright or dark spots on the screen when it plays
which is a very common phenomenon in active matrix display
technology. It does not indicate any fault or problem.
www.elinz.com.au
sales@elinz.com.au
1300 881 773
www.elinz.com.au
sales@elinz.com.au
1300 881 773
AC adaptor or car adaptor is not
properly connected.
Unauthorized power supply is used.
The power switch is in OFF mode.
The channel selection is not done
properly.
Resetting the broadcast channels.
The volume is turned OFF.
The Audio sets are set in a wrong way.
The broadcast signal is too weak.
The Antenna is not adjusted properly.
The channels are not tuned properly.
The brightness and contrast is not
adjusted properly.
Cold environment temperature.
Punch-drunk or unstable picture
The antenna is not adjusted properly.
Weak TV Signal
The Antenna direction is incorrect
The TV maybe receiving reflecting
signals from buildings or mountains in
the area.
The TV maybe receiving electronics or
electromagnetic interference when car
engineers trains high voltage wires or
neon signs
The colour is not properly adjusted.
Weak Signal
No Power Supply of No Voice
Electric wire Conjunction inaccuracy.
Check line connections
The fuse breaks: Replace with
compatible fuse specification.
The CD has already inserted but no sound
Press the CD to its right direction
and make its label in an upward
exposure.
The Disc become soiled or row to
harm seriously;
Clean the CD or replace with a
new Disc
The vibration caused emergency jump to
the sound phenomenon
Unsteady installation; (Use
gearing parts to install this
machine firmly.
Clean the CD or replace with a
new Disc.
Have no vibration appearing with the sound
phenomenon.
The CD is dirty or damaged,
Please clean or replace the CD.
Cautions:
1. Keep the machine from rain or damp to avoid fire and electric shock.
2. Do not try to repair the device by yourself. Please switch off the
machine immediately and inform our factory or dealers if there’s any
problem. This product is comprised of many electronic components.
Disassembling or self-renovating without a professional guidance can
cause machine damage.
3. Do not expose machine to moisture, dust, vapour, oil smog, direct
sunlight or influential environment.
4. Do not use thinner or other chemical detergents in cleaning the
machine. Use a soft cloth to remove dust or dirt on the machine.
5. Keep the machine away from very cold or very hot temperature
environments. Note: the machine’s storage temperature ranges - 10
degrees Celsius ~ 60 degrees Celsius and its operating temperature is
0 degrees Celsius ~ 40 degrees Celsius.
6. Only play compatible Discs. This machine can only play DVD/CD-R/CD-
RW/SVCD/VCD/DVCD/CD/MP3/MP4/JPEGS, receive TV signal with
built it tuner.
7. Avoid dropping or large impact to the machine.
8. For your safety, do not turn on/ watch or operate the machine while
driving. In some countries and regions it’s against the law.
9. Safe power supply : DC 12V(10V-14V)
Attention:
