Quick Start Manual
4
6. User Management
Touch the screen and a menu bar will pop up at the bottom of the screen, click > [User
Mgt] > [Add user]. When there is a registered admin, after passing the verification of admin’s
face or card or password then the menu can be entered
[ID]: When registering, each user can only have one unique ‘ID’.
[Name]: Input、edit name by T9 input method.
[Face]: Follow the on-screen prompt for face registration.
Note: Please stand directly in front of the device, face the
camera, and keep the entire face displayed in the frame. In
order to maintain a good face recognition effect. The following
picture is for your reference
[Card]: Select Reg. Card and put card on swipe area to register card
[Password]: An ID can only register one password. After clicking the password icon, enter
the password to be set and then press ok to confirm the password again.
Remark: Verify password by touching the screen then click then input ID-click
‘OK’-input password-click ‘OK’
Click > [User Mgt] > [User view] to browse all registered persons in the device, click
corresponding user to edit its information, including name, password, dept, admin.
[User View]: You can quickly locate the user you want to edit by 【Find】or 【Find Name】
at the top of the page. Or slide the screen to search user.
1) Edit user information: Select user you want to edit, you can change any information in
this page except ‘user ID’
2) Delete user: Select user you want to edit →Delete
[Privilege]: User and Admin can be selected
1) User: If there is Admin in this device, user is not allowed to access into menu
2) Admin: The manager of this device. Only admin has permission to access into menu.
