Element ELE1X4SPV350 Manuel utilisateur
VGA Splitter
1x4 VGA Splitter
ELE1X4SPV350
INSTALLATION MANUAL
350
MHz
350
MHz
INTRODUCTION
Dear customer,
Thank you for purchasing this product. For optimum performance and safety, please read these instructions
carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.
This product is a 1x4 VGA splitter with audio. It distributes the input of the VGA signal and stereo audio signal
into the two identical outputs simultaneously. This product has the ability of buffering and amplifying. Each
amplifier splitter’s output can achieve long distance transmission of VGA signal of more than 15 meters. This
VGA splitter offers solutions for monitors or projectors retail and show site and projector factory, noise, space
and security concerns, data center control, information distribution, conference room presentation, school and
corporate training environments.
Features
This VGA splitter has many features that enable it to perform in a superior manner.
Easy to use
Install in seconds
Connects VGA source to 4 VGA displays at a time
Connects stereo and audio source to 4 audio receivers at a time
Supports highest video resolution up to 1920x1200 and 1080p
Supports highest video amplifier bandwidth to 350MHz
Package Contents
VGA Splitter VGA-102A/VGA-104A
Power Adapter
User manual
Specifications
Input connectors: 1 VGA 15 pin female
Output connectors: 4 VGA 15 pin female
Bandwidtch (-3db): 350MHz
Output independence/Level: RGB: 750 0.7Vp-p HV SYNC TTL Level
Resolution: 1920x1440, Support DDC, DDC2, DDC2B (at PNP port)
Horizontal frequency: 30-180 KHz
Vertical frequency: 43-250 Hz
Transfer distance: <50 meters
Power consumption: Use AC-DC Adaptor DC 9-12V Consumption <1.7w
Dimensions(LxWxH): 4.3” x 2.2” x .98”
Housing: Metal
Operating temperature: 5˚C - 40˚C
Humidity: 0% - 80%
SPECIFICATIONS
Connection and Operation
Use a quality VGA cable to avoid the signal interference. The RGB grounded wire can not
be short circuited otherwise there will be vision superposition.
Make sure the cable and plugs are in good shape. Make sure the grounded wires and all
the connections are working properly.
Make sure there is no disturbing source around.
Assure the grounded wire is installed properly, the ground resistance is less than 4 Ω
Do not plug or unplug the cable with electricity.
End user is not authorized to open the device cover. All warranties void if tampered with.
INSTALLATION
ELE1x4SPV350
computer computer
SINGLE STAGE INSTALLATION DAISY CHAINING
monitors
monitors monitors monitors
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Element Convertisseur de média
