1. Warning&Statements
Note: In order to reduce the hazards of fire,electric shock and injury,
etc,the statements listed below shall be taken into consideration upon
application of electric tools.
1. Understand your electric tool fully by going through the user manual
carefully together with identifying the application,limitation and potential risk
accordingly.
2. Adopt protective appliances and act by conforming to the due order strictly.
3. Remove all the regulatory instruments, and form the habit to check about that
prior to application of electric tools.
4. Keep the operational site clean. Accidents are most likely to occur in case
that the electric tools are used in a messy and dirty place, or on the workbench.
5. Any operation in unsafe conditions is strictly prohibited. Do not use the
electric tools in places exposed to damp/moisture, or leave them outside in
rainy days. Make sure to keep the operational site bright enough.
6. Keep the children away from the devices. Certain distance shall be
guaranteed as for the children in search of on-site operational experience
7. Actions shall be taken to avoid the workshop accessible by children without
permission, such as locking the door, cutting off the power supply or taking
away the launch key.
8. Do not use the devices at will. To ensure the overall quality of work piece and
maintain security anyway, please use the devices within the design capacity.
9. Use the devices correctly, and do not operate them in overloading or
abnormal status
10. Ensure appropriate clothing. Do not wear loosen clothes, gloves, tie, knot,
etc. Which may result in hazards of being entangled by running devices. Prefer
shoes with skid proof to avoid slipping, and cut the hair to the proper length.
11. Remember to wear protective spectacles. Abundant dust may come out in
the buffing process, thus it’s necessary to wear dust mask. Glasses in daily use
incorporate lens with impact resistance only, which could by no means meet the
safety requirements.
12. Hold the work piece tightly, if necessary, you may use a clamp or vice,
Which appears to be safer than grabbing with hands
13. Do not place your hands over the twisting disk. Meanwhile, stand still during
the operations.
14. Prior to adopting the device, check if the disk suffers from defects are
