CONTROL
The product can be controlled via the separate remote control.
MAINTENANCE
There are no user serviceable parts in this product. Periodically check the product for LED
failure and damage. If any of the LED’s have failed or the product is damaged in anyway
switch off and disconnect from the mains supply. To clean the product, switch off and
disconnect from the mains supply. Using a slightly damp cloth gently wipe over. Do not
use bleach, solvent based cleaners or strong detergents. These may damage the product and
invalidate the warranty. If the mains lead is damaged, it must be replaced by the manufacturer
or and authorised service centre.
PAT TESTING
When used in an office environment, we recommend that this product should be safety-tested
yearly by a qualified electrician (PAT Tested). We recommend that it is PAT tested regularly
when used in a domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least once every 10
years or at every change of occupancy. For office and retail premises, and buildings such as
village halls, the wiring must be inspected at least once every 5 years. It is recommended that
all building be fitted with smoke alarms (it is mandatory for new buildings)
TECHNICAL SPECIFICATION
Power Input ..................................................................................................................DC12V 1.5A
Puck Dims...............................................................................................................60x60x8mm x 6
Illumination ................................................................................................................................LED
Controller ...........................................................................................................IR Battery CR2025
SERVICE WARRANTY
Electrovision Ltd. guarantees the product free from defects in materials and workmanship for
a period of twelve months. Should this product be operated under conditions other than those
recommended, or any attempts are made to service or modify the product, then the warranty
will be rendered void. The product you buy may sometimes dier slightly from illustrations.
This warranty is in addition to, and does not aect, your statutory rights. Our guarantee is
administered by our retailers. If your product arrives damaged, you must contact the retailer
from whom you bought it. The retailer’s contact details will be on the invoice that arrived with the
product, or on the e-mail you received when you placed the order. Do not contact Electrovision,
only your retailer can arrange a replacement. If the product needs to be repaired or replaced, you
must contact the retailer from whom you bought it. If you have just received your product and
require technical help in using it, please call our Help Desk on (0845) 459 4816
Electrovision Ltd, Lancots Lane, Sutton, St. Helens, Merseyside, WA9 3EX
www.electrovision.co.uk
R
ON
OFF
WRGB
FLASH
STROBE
FADE
SMOOTH
Brightness
White
Colour
Selection
Programs
