info@electron-retracts.com
User manual and installation instructions
4
ControlBox
Dimensions (mm) 60,5 x 33,5 x 16
Weight (g) 35
Input Voltage Check the voltage required for your retract
Input receiver Voltage Up to 9 V
Inputs • GEAR signal input (PWM)
• BRAKE signal input (PWM)
• STEERING signal input (PWM)
• Battery Input (XT-30 male socket)
• UART port (for manufacturer use ONLY)
Outputs • 3x Retract outputs (XT-30 female socket)
• 2x Brake outputs (JR-servo female socket)
• 1x Steering Servo output (JR-servo female socket)
Max. current per output 8A
We highly encourage to check the manual provided with your landing gear, which
contains first use warnings and a connection diagram, before you begin to install your
landing gear and use the ControlBox.
ORIENTATION AND PLACEMENT
The ControlBox doesn’t required to be oriented towards an specific direction from your
model, and it’s not mandatory for it to be placed on a flat surface.
We recommend installing the ControlBox in a location that allows for the shortest
possible connections with retracts and brakes. The connection wires can be as long as
required, however if you use extension wires, use wires of at least the same
gauge/section as the ones provided with your landing gear, to avoid voltage drops. The
less length and amount of wiring used, the better.
60,5 mm
33,5 mm
16 mm
