Electrolux LX1700 Manuel utilisateur
Essential Iron
1700 W
LX1700
Instruction Manual
Important safety instructions
• Only use the iron for its intended use—it is designed for household use only.
• To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
• Always turn the iron OFF before plugging into or unplugging from the electrical outlet.
• Never pull on the cord to unplug; instead, grasp the plug and pull on it to remove from
outlet..
• Do not let the cord touch hot surfaces.
• Always disconnect iron from electrical outlet before lling iron with water, emptying
iron from water, or when iron is not in use.
• Do not use the iron if the cord or the appliance itself shows visible damage, or if the
appliance has been dropped or is leaking.
• If the iron seems damaged or malfunctions, take it to a qualied serviceman for
examination and repair. Do not disassemble yourself as incorrect reassembly may
result in a risk of electric shock.
• Burns can occur from touching hot metal parts, hot water or steam. Use caution
when turning the iron upside down—there may be hot water in the water tank.
• Never release steam facing people.
• To avoid a circuit overload, do not operate the iron on the same circuit with another
high wattage appliance.
• If it is absolutely necessary to use an extension cord, a cord with an ampere rating
equal to or greater than the maximum rating of the iron shall be used. Using a
cord rated for less amperage can result in a risk of re or electric shock due to
overheating. Care should be taken to arrange the cord so that it cannot be pulled on
or tripped over.
• The iron must be used and rested on a stable surface.
• The iron must not be left unattended while it is connected to the supply mains.
• Close supervision is required for any appliance used near children. Do not leave the
iron unattended while it is plugged into the outlet or when it is on an ironing board.
• Children should be supervised to ensure that they do not play with appliance. Parents
must warn children not to touch hot appliance parts.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision and instructions concerning use of this appliance
by a person responsible for their safety.
Main components and accessories
Using
• Remove all labels and protective lms prior to use.
• Before ironing your clothes or fabric for the rst time, it is recommended that you heat
the iron and use it on a damp piece of cloth for a few minutes. This will ensure that any
residue left over from the manufacturing process is burnt o the ceramic soleplate and
won’t transfer to your clothes.
• You may notice a slight odor and some steam coming out of the iron when using it for
the rst time. This is normal and should disappear quickly.
1.Front cover
2.Nozzle
3.Water inlet cover
4.Steam burst
5.Spray button
6.Steam push button
7.Upper handle
8.Temperature
9.Conduit
10.Rear cover
11.Lower handle
12.Lamp
13.Water tank
14.Cleaning button
15.Decoration board
16.Skirt
17.soleplate
Instruction Manual LX1700
Before use, please read all the instructions carefully and retain for future reference.
Steam Ironing
1. To begin steam ironing, turn the steam knob on to , then ll the tank with water
using the water cup. Prevent water overow by keeping iron erect when lling and by not
exceeding the MAX line. It is best to use distilled water.
o position
max position
2. Put the plug into the outlet and adjust the temperature regulator to a suitable temperature
according to the fabric.
3. Wait until the lights turn o, push the steam knob, and then you may begin ironing.
4. Pay attention to the water in the water tank. When the water is almost running out you
must unplug the iron and rell the tank.
5. After you nish ironing, unplug the iron immediately. Turn the steam knob to setting,
empty the water tank and place the iron in an upright position.
6. Put the plug into the outlet again and power on for 5 minutes so that any remaining
water should evaporate. Power o and store away properly.
Steam Jet Function
• Turn o the steam knob rst.
• Turn the temperature regulator to MAX position (otherwise you may see water leakage).
• After the indicator goes o, press the steam jet button.
• Press the button once every second for a steam release.
Water Spray
• Ensure that the water tank has enough water in it.
• Push the water spray button four times to make the clothes wet. Spray function is used
for ironing thick cotton or hemp fabric.
• Water spray can remove wrinkles.
Auto Shut-o Feature
• The red light will be on while the iron is heating.
• Once iron is heated, the light will turn o.
• When the iron is in a horizontal position, it will power o automatically after 30 seconds
.
• When the iron is in a vertical position, it will power o automatically after 8 minutes
Note:
When ironing heat reactive fabrics, it is recommended to put a layer of cloth onto the clothing
you are about to iron to prevent clothes from damage.
Sort garments according to their suitable ironing temperatures. Start ironing lower temperature
clothing rst and adjust the temperature regulator as needed.
Synthetics/silk (low temperature)
Wool (medium temperature)
Cotton/linen (high temperature)
Cleaning
• Make sure the appliance is unplugged and the soleplate completely cool before cleaning.
• Do not use any rough or corrosive chemicals to wipe the soleplate.
• Any residue or specks can be wiped o using a cloth with vinegar or water.
• A needle or toothpick can be helpful to clean the steam holes on the soleplate.
• Avoid scratching the soleplate with hard objects.
Storage
• Ensure that the iron is completely cool and that the water tank is empty before storing.
• Keep the steam knob in the OFF position.
• Use the Velcro to wrap up the cord.
• Do not discard the cardboard in the box the iron was packaged in to prevent corrosion
.
• Heat resistant mat included to enable storing the iron while it is still warm.
Before use, please read the instruction carefully and store it properly.
Basic instructions
1. Fill the water to the "MAX" line and plug the iron into the mains.
2. There are total 4 temperature setting. Press Temperature up button or Temperature down
button to select suitable temperature according to the fabric.
When the temperature is going up, the selected temperature on screen will be blinking until
the solephate temperature reached the selected temperature.
3. Then you can use it to iron your clothes with steam by pressing the steam activation
trigger. The higher temperature setting, the larger steam output. The max steam output is
about 40g/min
If the temprature has not reached the selected temperature, press the steam trigger will be
no use, it can avoid the water drip.
4. Auto shut o function (if any)
It will swich the iron o automatically if it hasn't been used for a period of time - usually after
8 minutes idle in the upright position and 30 second when resting on the soleplate.
Move the iron slightly or press any button, it will return To the temperature that it had before
being switched o.
Using vertically - for garment and fabric steaming
1. If using the Textile Brush attachment carefully slide it over the tip of iron before turning on.
2. Once plugged in, set to a high temperature, either Cotton or Max settings.
3. Wait for the blinking to turn o. Pick up the iron and hold vertically, with the tip tilted slightly
forward.
4. Press the steam trigger and move the iron up and down the garment or fabric you want
to steam.
5. If the steam output declines, simply tilt the iron forward into a horizontal position and
then tilt back vertical to continue
DO NOT tilt the iron upside down while using vertically.
Instruction Manual
LX1700
After ironing
1. Allow to cool completely. Unplug and empty the Water Tank.
2. Clean the Ceramic Plate and the Cover Plate with a damp cloth, removing any residues.
3. Store vertically on a clean, dry, at surface, with the cable wrapped around the Iron.
Technical Informations
After each use
1. Pour out the residual water inside the water tank, turn on the steam switch, and spray the
water vapor inside the machine.
2. Turn o the steam switch and pull the power cord out of the outlet.
3. Place the machine on a at desktop and wait for the product to be properly accepted
after cooling.
Nursing, cleaning and storage
(1) Do not use rough or corrosive detergents or solvents. (2) Please do not immerse the
steam scalding machine in water or other liquids. (3) Don't drop, throw it or try to bend it.
(4) Please do not attempt to disassemble the decomposition products. (5) Empty the water
tank after each use. (6) Avoid storing products in damp places. (7) Do not close to the
heat source or let the sun shine directly on the product. (8) Always ensure that the steam
outlet hole is clean, scale-free and not blocked. (9) It is recommended to store the ironing
machine in a at position, such as in a drawer.
Power
Water Tank size
Wattage
Model
220-240V-50-60Hz
320ml
1700W
LX1700C
Warranty clause
When you need normal consultation, please contact us, and provide a warranty card or
electronic order number, we will provide services free of charge; reect the failure, tell the
accurate fault phenomenon, we will serve you as soon as possible.
We oer a one-year warranty for our products. The warranty period is calculated from the
date of purchase.
During the warranty period, we will replace the parts or the whole product according to
the situation. The accessories of products, such as accessories, packaging, etc. are not
covered by the warranty.
To apply for warranty, the product mainframe must be submitted to the designated
maintenance point together with the certicates that can prove the purchase date (e.g.
purchase certicate, invoice or network electronic order number, etc.).
The above warranty does not include the following:
(1) Any damage caused by improper use (e.g. incorrect use of current, voltage, insertion of
products into inappropriate sockets or man-made damage, etc.).
(2) Faults caused by natural disasters.
(3) Troubles caused by repairs by non-company maintenance personnel.
(4) The product aging and wear caused by normal use, but it has little eect on the use
function of the product.
(5) The warranty service will be terminated immediately after the product has been
repaired by unauthorized personnel or used parts not originally manufactured.
(6) Other non-product problems and faults caused by external factors.
Within the scope of the law, the right of nal interpretation of the above clauses belongs to
our company.
Product warranty card
Main technical parameters
Product model: LX1700 Water tank capacity: 320 ml Steam volume: 10-40g/min
Quality
+
Sustainability
Your new Electrolux garment care supertool
is designed with sustainability in mind.
Visit https://www.electroluxgroup.com/en/ to learn more about our
Shape living for the better initiative
Concept
Our key design philosophy is to achieve top performance
with the lowest energy demand.
Carefully calibrated power generates more steam with less
electricity, which saves on runtime, yields smoother clothing
in fewer passes, delivers a longer-lasting press, rejuvenates
clothing to retain newness, and ultimately keeps energy and
garments from waste.
Components
You only get out what you put in, so we insist on parts made
with more sustainable materials and processes.
In line with the SDGs created by the UN, we use innovative
materials that help both performance and planet, such as
post-consumer rubber cords, repurposed plastics, and
recyclable ceramicized soleplates that oer even edge-to-
edge heating.
Package
This box is for keeps. Made of the nest recycled materials,
it features an original, reusable design.
An exclusive, heat-resistant inner pad enables you to safely
store your garment care tool even while it’s hot. And the
striking, inkless box turns into a valuable, décor-friendly
storage container you will enjoy keeping in your home,
and out of landfills.
Questions comments?
Contact Smartekusa at 1-877-678-6232
12 Hinsdale Street
Brooklyn NY 11207
Electrolux is a registered trademark used under license from AB Electrolux (publ.)
A box worth keeping in the family
Table des matières
Autres manuels Electrolux Fer
Electrolux
Electrolux EDB1720 Manuel utilisateur
Electrolux
Electrolux MOTION EDBT800 Manuel utilisateur
Electrolux
Electrolux EDB1730 Manuel utilisateur
Electrolux
Electrolux RENEW 800 Manuel utilisateur
Electrolux
Electrolux Zanussi Professional N 700 Manuel utilisateur
Electrolux
Electrolux EDBS3350 Manuel utilisateur
Electrolux
Electrolux 4SafetyPRECISION EDB61XX Manuel utilisateur
Electrolux
Electrolux EDB16 Series Manuel utilisateur
Electrolux
Electrolux FIT1 Manuel de programmation
Electrolux
Electrolux E8SI1-80BM Manuel utilisateur
Electrolux
Electrolux AEG DB 8590 Manuel utilisateur
Electrolux
Electrolux EDBS2300 Manuel utilisateur
Electrolux
Electrolux AEG DB 75 Series Manuel utilisateur
Electrolux
Electrolux RENEW 800 Manuel utilisateur
Electrolux
Electrolux CompactPower EDBS7146GR Manuel utilisateur
Electrolux
Electrolux R Series Manuel utilisateur
Electrolux
Electrolux Perfect Set Gas Range Manuel utilisateur
Electrolux
Electrolux Zanussi Professional N 700 Manuel utilisateur
Electrolux
Electrolux ESI520 Manuel utilisateur
Electrolux
Electrolux EDB16 Series Manuel utilisateur
