Electrolux KITE" Bar graph Variant Manuel utilisateur

SERVICE MANUAL

Muggenhofer Straße 135

D-90429 Nürnberg

Germany

Fax +49 (0)911 323 1022

DGS-TDS-N

Publ.-Nr.:

599 531 461

685

12.07

Edition:

Hobs

with

„KITE“

Input electronic

- 2 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

Table of contents

1. ESD=electrostatic discharge ......................................................................................3

2. Software specifications, functions ..............................................................................4

2.1 Appliance variants...................................................................................................... 4

2.2 Button / and display layouts ....................................................................................... 5

2.2.1 „KITE“ Bar graph Variante.........................................................................................5

2.2.2 „KITE“ 7 Segment Variant .........................................................................................6

2.3 Main features of operation .........................................................................................7

2.3.1 Appliance On and Off connection ..............................................................................7

2.3.2 Child safety function................................................................................................... 7

3. Automatic Shut-Off.....................................................................................................8

4. Functional parts, Component data .............................................................................9

4.1 „KITE“ Input electronic ...............................................................................................9

4.2 „HOC 2010“ power electronics for radiation-heated hobs........................................11

5. Fault diagnosis .........................................................................................................12

5.1 What to do if ...? .......................................................................................................12

5.2 Alarmmanagement (Faultcodes)..............................................................................13

5.2.1 Error codes for hobs with radiation-heated cooking zones ...................................... 13

5.2.2 Error codes with hobs with induction heating........................................................... 13

6. Demo Mode/ Service Mode/ Alarm Error Mode .......................................................13

- 3 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

1. ESD=electrostatic discharge

As the single electronic interfaces are not protected internally against statical electricity and are

partially open, you must pay attention to that, in case of a repair, there will be a potential

compensation via the housing of the appliance (touch it) in order to neutralize a possible

charging and to prevent a damaging of the affected electronic interface.

You also have to be careful with those electronics delivered as spare parts, which have to be put

out of the ESD protective package only after a potential compensation (discharge of possible

statical electricity).

If a potential compensation with an existing static electricity is not executed, it does not mean

that the electronic is demaged directly. Consequential damages may result due to the damaging

of internal structures which arise only in case of load through temperature and current.

Endangered are all assembly groups which are provided with control entries, wire paths lying

open and free-accessible processors.

- 4 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

2. Software specifications, functions

2.1 Appliance variants

„KITE“ Bar graph Variant „KITE“ 7 Segment Variant

Sample Illustration Sample Illustration

- 5 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

6 2 7 8 9 7 2

1 2 7 3 4 5 7 2

Sample Illustration

2.2 Button / and display layouts

2.2.1 „KITE“ Bar graph Variante

1 Locking/child safety lock with display

2 Additional multizone or additional connection of special functions with LED, depending on

appliance class/make

3 Light elements for the cooking stage display

4 Cooking zone displays (LED) timer function

5 Timer display, 2x 7 segment displays

6 On/Off with display

7 Cooking zones status displays (LED) depending on appliance class/make

- Pot recognition

- Automatic deactivation

- Residual heat ...

8 Timer operation

9 Cooking stage selection

- 6 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

6 2 7 8 7 2

1 2 7 3 4 5 7 2

Sample Illustration

2.2.2 „KITE“ 7 Segment Variant

1 Locking/child safety lock with display

2 Additional multizone or additional connection of special functions with LED, depending on

appliance class/make

3 Cooking stage selection

4 Cooking zone displays (LED) timer function

5 Timer display, 2x 7 segment displays

6 On/Off with display

7 Cooking zones status displays (LED) depending on appliance class/make

8 Timer operation

- 7 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

2.3 Main features of operation

2.3.1 Appliance On and Off connection

Switch on: -Touch "ON" sensor panel for 1 second. Pilot light illuminates.

Switch off: -Touch "OFF" sensor panel for 1 second. Pilot light illuminates.

After activation, a cooking stage or a function must be set within 10 seconds or the appliance

switches off automatically.

2.3.2 Child safety function

The child safety lock prevents an undesirable use of the appliance.

Switching child safety function on

- Switch appliance on with the `ON´ safety switch (do not set a cooking stage).

- Press the child safety lock button for 4 seconds. Display "L". The child safety device is

activated.

Bypassing the child safety lock

With this, the child safety lock can be deactivated for a single cooking process; it continues to

remain active afterwards.

- Switch appliance on with the `ON´ safety switch (do not set a cooking stage).

- Press the child safety lock button for 4 seconds. Display "L".

It can be used one more time until the next deactivation of the appliance. After the child safety

device has been bypassed a cooking stage or function must be set within approx. 10 seconds,

otherwise the appliance switches off automatically.

Switching child safety function off

- Activate the appliance with the "ON" sensor button.

- Press the child safety lock button for 4 seconds. Display "L".

- Appliance switch off. The childproof lock is deactivated.

- 8 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

3. Automatic Shut-Off

Hob

- If you do not set a cooking level in a cook zone within approx. 10 seconds after switching

on of the cook field, the cook field switches off automatically.

- If one or more sensor fields are covered longer than 10 seconds, e.g. by a pot placed on

it, a signal sounds and the cook field switches off automatically.

- If all cook zones are switched off, the cook field switches off automatically approximately

10 seconds later.

Control panel

- If one or more sensor panels in the operating panel should be covered for more than 10

second when the appliance is switched off, a buzzer sounds. The buzzer switches itself off

automatically when the sensor panels are no longer covered.

Cooking zones

- If one of the cook zones is not switched off after a certain time or if the cook stage is not

changed, the appropriate cook zone switches off automatically. „- “is displayed. Before

renewed use the cook zone must be set to „0 “and be cooled down.

cooking level The cooking zones are disconnected with

1-3 6 Hours

4-6 5 Hours

7-8 4 Hours

9-14 1,5 Hours

- 9 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

4. Functional parts, Component data

4.1 „KITE“ Input electronic

Depending on the "KITE" type, "KITE" input electronic mainly comprises one or more LED

displays, 4 "sliders" (touch control operating strips), capacitive sensor buttons and a

microprocessor in addition to diverse semiconductor modules.

"KITE" controls both radiation-heated hobs with HOC power electronic and hobs with induction

heating.

Fig.: „KITE“ Bar graph Variante

- 10 -

DGS-TDS-N 12.07 U. H. / A. B. © Electrolux 599 531 461 EN

Sample Illustration Induction hob

With radiation-heated hobs, the HOC power electronics can be accessed after the silicone

frame has been removed. Please refer to Service Manual 599 519 523 for further information on

the servicing of induction hobs.

Assembly situation „KITE“ input electronic

The `KITE´ input electronics system can be accessed after the top glass/top trough frame

connecting screws have been loosened and the top glass has been lifted off; it can now be

easily removed together with the silicone sealing mat. This is valid for both radiation-heated

hobs and hobs with induction heating.

The silicone sealing mat is enclosed with the configured `KITE´ input electronics spare part. It is

imperative that this also be replaced and carefully fitted in order to ensure the tightness of the

electronics. The `KITE´ input electronics must be exactly fitted in the mat. Check that the cable

sleeve is correctly positioned before closing the top.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Electrolux Plaque

Electrolux

Electrolux EGG3322NVX Manuel utilisateur

Electrolux

Electrolux EHP 6640 P Manuel utilisateur

Electrolux

Electrolux EHE 683 Manuel utilisateur

Electrolux

Electrolux EHS6610K Manuel utilisateur

Electrolux

Electrolux EHP6612K Manuel utilisateur

Electrolux

Electrolux EHM 6335 Manuel utilisateur

Electrolux

Electrolux HOI625X Manuel utilisateur

Electrolux

Electrolux EHF3320FOK Manuel utilisateur

Electrolux

Electrolux 92558 G Manuel utilisateur

Electrolux

Electrolux EGH6343BOX Manuel utilisateur

Electrolux

Electrolux EHF6232FOK Manuel utilisateur

Electrolux

Electrolux HHI626S Manuel utilisateur

Electrolux

Electrolux EHS6140HOW Manuel utilisateur

Electrolux

Electrolux EGS6343 Manuel utilisateur

Electrolux

Electrolux EIV63344 Manuel utilisateur

Electrolux

Electrolux LIL61443C Manuel utilisateur

Electrolux

Electrolux GPE363YK Manuel utilisateur

Electrolux

Electrolux EHG 60412 Manuel utilisateur

Electrolux

Electrolux HOI630MF Manuel utilisateur

Electrolux

Electrolux EHC60061X Manuel utilisateur

Electrolux

Electrolux EHT 310 X Manuel utilisateur

Electrolux

Electrolux EHD6691X Manuel utilisateur

Electrolux

Electrolux EHE 685 Manuel utilisateur

Electrolux

Electrolux EHF3920BOK Manuel utilisateur

Manuels Plaque populaires d'autres marques

Siemens

Siemens EX875KYV1E Fiche technique

AEG

AEG CERAMIC HOB 6010 K Manuel utilisateur

VALERA

VALERA CT 70A Manuel utilisateur

Zanussi

Zanussi ZGF 6420 Manuel utilisateur

Gaggenau

Gaggenau CI 273 Manuel utilisateur

G3 Ferrari

G3 Ferrari Energy Manuel utilisateur

Pkm

Pkm IN4B Manuel utilisateur

Award

Award H903BG Manuel utilisateur

Zanussi

Zanussi VCH 5005 RZ Manuel utilisateur

Miele

Miele KM 523 Manuel utilisateur

Hotpoint

Hotpoint IS67V8CCXT/E Manuel utilisateur

AEG

AEG HK854870XB Manuel utilisateur

Cookology

Cookology SEP600BK Manuel utilisateur

Bauknecht

Bauknecht Hob Manuel utilisateur

Zanussi

Zanussi ZGM 782 Manuel utilisateur

dipo INDUCTION

dipo INDUCTION DIBK218S Manuel utilisateur

Miele

Miele KM 5987 Manuel utilisateur

Miele

Miele KM 360 G Manuel utilisateur