Electrolux Professional IC6 4819 Manuel utilisateur

01106073/GB

.19

Operating handbook

Flatwork ironers

IC6 4819 – 4821 – 4825 – 4828 – 4832

LF/FLF/R/RLF/FRLF

•Flatwork ironer

•Flatwork ironer folder - LF

• Feederatworkironerfolder-FLF

•Flatwork ironer with rear load removal - R

Translated from french

4519 00

01106073

Page

Notice Date

OPERATING

HANDBOOK Table of contents

The manufacturer reserves the right to modify construction and equipment characteristics.

Pages/Chapters

General

Safety precautions - Warranty terms and exclusions ..........................................1/1

Recommandations and Warnings to consider.....................................................2/1

Ergonomics Recommendations...........................................................................5/1

General................................................................................................................1/2

Method of use

Dryer-ironer control panel....................................................................................1/3

 Simpliedinstructionsforusingtheironer...........................................................2/3

Feeder system control panel ...............................................................................3/3

 Simpliedinstructionsforusingtheironer...........................................................4/3

Client mode .........................................................................................................7/3

Starting the machine............................................................................................7/3

Cooling mode ......................................................................................................8/3

Automatic mode...................................................................................................8/3

Manual mode.......................................................................................................9/3

With or without folding mode ...............................................................................10/3

Select the length of folds .....................................................................................11/3

 Selectthelengthoftherstfold ..........................................................................11/3

Service screen in automatic mode ......................................................................12/3

Service screen in manual mode ..........................................................................12/3

Additional instructions..........................................................................................13/3

Precautions for use..............................................................................................23/3

Stopping the machine..........................................................................................26/3

Using the handle..................................................................................................26/3

RABC Option .......................................................................................................27/3

Feed Now option .................................................................................................28/3

Feed Alone option................................................................................................29/3

Safety

Locking and tagging procedure ...........................................................................3/4

Safety devices .....................................................................................................4/4

Operating incidents

The linen remains stuck to the cylinder ...............................................................1/5

 Whenthelinencomeso󰀨thedryer-ironeritisnotdry ........................................1/5

The folding system works without stopping .........................................................1/5

The heating does not work or works badly ..........................................................2/5

The folding system is defective ...........................................................................3/5

The machine temperature drops .........................................................................3/5

The machine stops suddenly...............................................................................3/5

Additional instructions..........................................................................................3/5

Maintenance

Preventive maintenance ......................................................................................1/6

Replacing ironing bands ......................................................................................7/6

Appendices

Explanation of graphic symbols...........................................................................1/7

Washing symbols.................................................................................................2/7

Conversion of measurement units.......................................................................3/7

 Lubricationtable ................................................................................................4/7

4519 11

01106073

PageNotice Date

OPERATING

HANDBOOK

1. Precaution for use

Safety precautions

• This ironer is a professional machine and should not be operated by underage people.

• This ironer must be used exclusively for textiles suitable for professional ironing.

• This ironer is suitable for textiles that have been exclusively washed in water. Do not iron

textiles that have been washed with solvent (dry-cleaning).

• Do not iron items coated, printed or impregnated with solvent, paint, wax, grease or any

easilyinammableproducts.Thereisaveryhighriskofre.

Warranty terms and exclusions

Electrolux Professional provides warranty services in line with local regulations and is conditional

on the equipment being installed and used for the purposes as designed, and as described within

the appropriate equipment documentation.

Warranty will be applicable where the customer has used only genuine spare parts and has perfor-

med maintenance in accordance with Electrolux Professional user and maintenance.

Electrolux Professional strongly recommends to use Electrolux Professional approved cleaning

agents,rinseanddescalingagentstoobtainbetterresultsandmaintainproducte󰀩ciencyover

time.

TheElectroluxProfessionalwarrantydoesnotcoverdamagesandine󰀩cienciesderivingfrom

external causes beyond the manufacturer’s responsibilities, such as:

-Insu󰀩cientandabnormalcapacityoftheelectrical,hydraulicandgassystems,irregular

supply voltage, impurities contained in the gas or water supply that does not comply with the tech-

nicalrequirementsforeachmachine,insu󰀩cientextractionsystems,customer’snegligenceand

misuse;

- Deterioration caused by action of unsuitable detergents, additives or cleaning means;

- Non-compliance with the use and care instructions detailed in this manual;

-Tampering,modicationsandrepairscarriedoutbythirdpartiesnotentrustedinwritingby

Electrolux Professional

- Use of non-original components (e.g.: consumables, wear and tear, or spare parts);

-Modicationofsafetysystems;

- Poor maintenance and misuse;

Warranty does not include scheduled planned maintenance activities, or the supply of cleaning

agentsunlessspecicallycoveredwithinanylocalagreement,subjecttolocaltermsandcondi-

tions.

Recommendations and Warnings to consider

4519 1

01106073

PageNotice Date

OPERATING

HANDBOOK

We draw your attention on the following practices. they will have consequences on the quality of your

nished items and can, in some cases, void the warrantly of your ironer.

RECOMMENDATIONS

AND WARNINGS

REGARDING

DESCRIPTIONS

(why and what are the consequences)

Type of product concerned

Basic R LF FLF FFS

Multi layer items : sheets folded in two layers and more will be much

longer to dry. A double layer sheet will be longer to dry

than twice the time of a single layer.

The several layers of a sheet may slide against one

another depending on their material and quality. The

consequences can be a poor ironing quality (wrinkles),

will be a poor quality length foldingand most probably

an impossible cross-folding.

X X X X X

Worn polycotton Sheets

(cotton washed away) :

Polyester-cotton blended sheets have got a limited life-

time that needs to be considered. Old sheets will have

no cotton left after a certain amount of washes.

The consequences of ironing them on an ironer are :

- Increased electro-static unbearable by the machine

even if this one is equiped with an anti-static bar.

Sheets will stick to parts of the machine creating jams

and disrupting the length folding.

- Photocells may not detect the presence of the sheets,

also disrupting length folding.

X X X X X

Large items Your machine cannot automatically feed items wider

than its width,

For an IC6 4819 the maximum width is : 1910 mm

For an IC6 4821 the maximum width is : 2120 mm

For an IC6 4825 the maximum width is : 2540 mm

For an IC6 4828 the maximum width is : 2750 mm

For an IC6 4832 the maximum width is : 3170 mm

Your machine cannot fold items longer than 3

meters

X X X

Size of items in general Your ironer will deliver optimum results when pro-

cessing items which width is closest to the maximum

acceptable width.

Processing smaller items will alter the performance

of your ironer. In such cases, it's preferable to operate

your ironer in manual mode.

Example of sheets of 1.80 x 2.80m processed on an

IC64825FLF or FFS Gas or Electric heated:

They will have to be fed by the 1.80m width (2.80m

being wider than the machine can feed). The automa-

tic feeding will feed in the middle of the machine lea-

ving 37cm on either side of each sheet. This practice

will quickly lead to an overheating of the sides of the

cylinder and dramatically reduce the production of the

ironer.

You may delay the overheating of sides of the cylinder

by alternating the side through which you feed the

items.

You should always seek to use the maximum width of

your ironer.

X X X X X

4519 1

01106073

Page

Notice Date

OPERATING

HANDBOOK

RECOMMENDATIONS

AND WARNINGS

REGARDING

DESCRIPTIONS

(why and what are the consequences)

Type of product concerned

Basic R LF FLF F-R FFS

Size of items for

automatic feeding

The minimum size of items to be automatically Length

Folded is 90cm. Smaller sizes will be systematically

dropped or rejected if ironed in folding mode. Note

that it is highly recommended not to automatically

feed items that are much smaller than the width of the

ironer. See "Size of items in general"

X X X

Size of items for

automatic folding

The minimum size for items to be automatically cross

folded is 110cm. Smaller sizes will be systematically

rejected to the rear of the FFS ironer.

Thick items Thick fabrics may lead to very thick folded items

depending on your choice of folding patern. The maxi-

mum thickness acceptable by the cross folding unit

is 40mm for the second cross fold and 80mm for the

third cross fold.

You can modify this thickness by modulating the

length folding patern and/or cancelling the third cross

fold (on IC64825FFS or IC64832FFS). Please refer to

the programming manual.

Thin items Thin and light fabrics (below 80 gr/m²) may cause

disruption in the length folding and not allow optimum

quality of folding. They may also jam. You can iron

them with precaution.

X X X X X X

Particular items Your ironer is designed to process atwork only, such

as sheets, duvet covers, pillow cases, table cloths and

napkins. Any other items may cause malfunctions of

your ironer and may void your warranty. If you are

unsure, refer to your nearest Elecrolux Professional

distributor for advise.

Your ironer is not designed for processing the fol-

lowing items :

- Padded covers/ bed covers : they are often too thick

and may be of inapropriate material

- Terrycloth : it must be tumble dried. Ironing them

will make them very rough.

- Fitted sheets : elastics may deteriorate following

exposure to excessive heat and possibly melt. Depen-

ding on their shape and material, they may be ironed if

fed into the ironer with elastics facing upward so that

they are not in direct contact with the cylinder. In no

case they must be automatically fed as the elastics will

greatly disrupt the feeding. They cannot be automati-

cally folded for the same reason.

- Garments : they are of complex shape (not at) and

must be ironed with appropriate nishing equipment.

- Aprons : they are often at but feature cords and

strings that will jam into moving parts of your ironer.

- Synthetic textiles (i.e. shower curtains) : their

material may not sustain the heat and will melt on the

cylinder.

As a rule, do not iron articles that contains plastic,

foam, sponge ruber or similarly textured rubberlike

materials.

X X X X X X

4519 1

01106073

PageNotice Date

OPERATING

HANDBOOK

RECOMMENDATIONS

AND WARNINGS

REGARDING

DESCRIPTIONS

(why ant what are the consequences)

Type of product concerned

Basic R LF FLF F-R FFS

Inappropriate materials Your ironer is designed to safely process cotton, po-

lyester-cotton and ax. For any other material, please

refer to your linen supplier and you nearest Electrolux

Professional distributor.

X X X X X X

Ironer maintenance Your ironer is designed to run 8 hours without inter-

ruption. Every 8 hours and at other set intervals there

are a number of required maintenance operations to

be performed by yourself or your service engineer. It

is critical that you strictly follow these requirements

for your ironer to run properly. Please refer to chapter

"Preventive maintenance" of this manual. Should you

run your ironer for more than one shift, you must en-

sure that these maintenance operations are performed

between shifts.

In addition to these maintenance operations, your

ironer should be stopped, cooled and shut down for at

least one hour every 24 hours.

X X X X X X

Reject ratio Because faltwork is only at and rectangle the day you

buy it and then rapidly changes shape and charateristcs

after each wash, it is normal that 4% to 5% are rejected

by the machine.

Note that the quality of feeding will inuence the

quality of folding. Items may be rejected because they

have not been fed properly. Static electricity and dirty

photocells will also interfere with the performance of

your ironer. Refer to "Preventive maintenance" chapter

of this manual.

X X X

PlivitTM Length Folding Your ironer performs a PlivitTM Length Folding patern.

It is dierent from an edge to edge folding and from an

accordion folding. Refer to Chapter 03 for explanation

and illustrations of various folding paterns.

In order to obtain consistent sizes of folded items, sor-

ting atwork per size before ironing is paramount.

X X X

Buttons on Duvet covers Some duvet covers feature various types of fasteners

that can be buttons, velcro, in plastic, metal or wood

etc… These duvet covers may be ironed making sure

that fasteners are facing up on the feeding table. The

drying in the area of the fasteners will be longer than

the rest of the duvet cover. This is normal due to the

multi-layer of textile in this area and its complex

shape. Lying these layers at on the feeding table will

help with a more homogeneous drying.

Note that if the thickness of the duvet cover plus the

buttons/fasteners is greater than 8mm, it may interfere

with the nger guard protection of your ironer and

stop it. This nger guard is a safety device to protect

operators getting their ngers caught and driven into

the ironer.

These elements may disrupt ironing and folding.

X X X X X X

4519 1

501106073

Page

Notice Date

OPERATING

HANDBOOK

Ergonomics Recommendations

The human body is designed for movement and activity but physical stress injuries as a result of

static and repetitive movements or unfavorable working postures may occur.The ergonomic features

of our product, the ones which may inuence your physical and cognitive interaction with it, have

been assessed and certied. A product which exhibits ergonomic features, in fact, shall full specic

ergonomic requirements, belonging to three dierent areas: Polytechnic,Biomedical and Psychosocial

(usability and satisfaction). For each of these areas, specic tests with real users have been performed.

The product was therefore compliant with the ergonomic acceptability criteria requested by the

standards applied. The product that you use is specically studied and tested in order to minimise any

physical problems associated to the interactions with the product.

We would like to point out some operating procedures we suggest to adopt:

- Handle the linen in a balanced way, trying not to arch your back during the feeding/unloading.

Try not to raise your arms above the shoulder level.

- Take in/out the laundry in small quantities.

- In order to avoid the entanglement of laundry including large items, add more rotation time in each

direction.

- If possible, ex your legs and don’t bend forward your back during the placement of the linen in the

lower box and during the achievement of any lower maintenance actions or items.

- If possible, push the trolley and pull it in order to reduce the distances.

- If possible, try to alternate the trolley position (on your right/ on your left) to avoid to work always in

the same position.

- Keep the viewing distance in order to understand properly the information displayed in the interface

or to view you interest in the ironer, reducing as much as possible the time spent with the eyes up

(neck extensions).

In case several machines are managed by the same operator the repetitive movements will increase

and as a consequence of this the related biomechanical risk will increase exponentially. Follow the

below recommendations to avoid, as much as possible, operators acquiring bodily injury.

• Make sure there are suitable trolleys or baskets for loading, unloading and transportation.

• We advise you to use a mobile bottom trolley with a maximum height of 850mm.

• Organize job rotation in the working place in the case several machines are managed by the same

operator.

• Organize job rotation in the working day when the operator has to iron large number of small items.

Please pay attention, this is only recommendations, people behavior remains key driver for ergonomy.

4519 12

01106073

Page

Notice Date

OPERATING

HANDBOOK

Before any use, it is compulsory to read the instruction handbook.

Users must have learnt how to the machine operates.

Theidenticationplateissituatedontheleftside.

This machine should be installed in conformance to the health and safety regula-

tions,andonlyusedinasu󰀩cientlyaeratedarea.

Check the instructions before installing or using the machine.

You should have found an instruction handbook and keys to open the machine casings, and

a maintenance poster to display in your laundry, inside your machine.

Depending on its destination, the dryer ironer is delivered bare or may be placed on a trans-

portpalletand/orpackedwithplasticlm.

In some cases, it may be delivered in maritime packing (wood crate).

Please refer to the handling chapter in this instruction handbook for a description of handling

operations.

2. General

4519

D1090

01106073

PageNotice Date

OPERATING

HANDBOOK

The machines described in this hanbook have a ironing capacity of 190, 210, 250, 280, 320

cmwidedependingonthetype.Theyareavailablewithsteam,electric,gasorthermaluide

heating.

A version of the machine with a fully automatic folding system enables one or two persons to

dry, iron and fold sheets longitudinally.

Another version with a mechanical system allows the washing to come out at the back of the

machine.

Theironingspeedisadjustableasafunctionofthedensity(weight/m²)andhumidityofthe

washing.

2. General

Identication

plate

Adjustmentlabel

(for gas machine only)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Electrolux Professional Fer

Electrolux Professional

Electrolux Professional IC6 48 FFS Series Manuel utilisateur

Electrolux Professional

Electrolux Professional IB42310 Manuel utilisateur

Electrolux Professional

Electrolux Professional IV648 FFS Vibe Series Manuel utilisateur

Electrolux Professional

Electrolux Professional IC64819FFS Manuel utilisateur

Manuels Fer populaires d'autres marques

Clatronic

Clatronic DB 3703 Manuel utilisateur

TEFAL

TEFAL FV4093Z0 Manuel utilisateur

Gorenje

Gorenje SIH 2200 BS Manuel utilisateur

Philips

Philips GC6012 Manuel utilisateur

Bosch

Bosch 2 Series Manuel utilisateur

Riffel

Riffel Catena KB-819 Manuel utilisateur

Texi

Texi Hestia Manuel utilisateur

Maxwell

Maxwell MW-3010 Manuel utilisateur

TREVIDEA

TREVIDEA Girmi ST60 Manuel utilisateur

Philips

Philips HI5914/30 Manuel utilisateur

Primula

Primula Vapormat Manuel utilisateur

Magio

Magio MG-541 Manuel utilisateur

Scarlett

Scarlett SC-1334S Manuel utilisateur

Bosch

Bosch Sensixx B22L Manuel utilisateur

Philips

Philips GC651 Manuel utilisateur

Vitek

Vitek VT-1247 VT Manuel utilisateur

Cleanmaxx

Cleanmaxx 3397 Manuel utilisateur

Philips

Philips GC800 Manuel utilisateur