Electro-Voice EVID-C44 Manuel utilisateur
EVID Compact Sound Speaker System
EVID-C44, EVID-C2.1, EVID-40C, EVID-S44, EVID-S44W, EVID-2.1, EVID-2.1W, EVID-40S, and
EVID-40SW
en | Installation Manual
Table of contents
1Safety 4
2Introduction 6
2.1 System features 6
3System overview 7
3.1 Packing lists 7
3.2 Product information 11
3.3 Dimensions 13
4Installation 15
4.1 Ceiling mount speakers 15
4.1.1 Ceiling mount satellite speaker installation 15
4.1.2 Ceiling mount subwoofer installation 18
4.2 Surface mount speakers 22
4.2.1 Surface mount satellite speaker installation 22
4.2.2 Wall bracket range of motion 23
4.2.3 Surface mount subwoofer installation 23
4.2.4 Removing subwoofer from the wall 25
5Wiring 26
5.1 Ceiling mount speakers 26
5.1.1 Wattage tap 26
5.1.2 70v/100v/4 ohm Mono 27
5.2 Surface mount speakers 28
5.2.1 Wattage tap 28
5.2.2 70v/100v/4 ohm Mono 29
5.2.3 8 ohm Stereo Surface Mount Subwoofer Only 30
6Troubleshooting 31
7Technical data 32
7.1 Ceiling mount speakers 32
7.1.1 Frequency response 32
7.2 Surface Mount Speakers 33
7.2.1 Frequency response 33
8Notes 34
en 3
Electro-Voice Installation Manual 2015.12 | 07 | F.01U.310.295
Safety
!
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Electro-Voice strongly recommends all loudspeakers be suspended taking into
account all current national, federal, state, and local laws and regulations. It is the
responsibility of the installer to ensure all loudspeakers are safely installed in accordance
with all such requirements. When loudspeakers are suspended, Electro-Voice strongly
recommends the system be inspected at least once per year or as laws and regulations
require. If any sign of weakness or damage is detected, remedial action should be taken
immediately. The user is responsible for making sure the wall, ceiling, or structure is capable
of supporting all objects suspended overhead. Any hardware used to suspend a loudspeaker
not associated with Electro-Voice is the responsibility of others.
Surface mount speakers
Safety Agency Compliance
The EVID 2.1 and EVID 40S bracket systems have successfully passed EIA-636 at a safety
factor of 8:1. The bracket systems are intended to support only the EVID 2.1 and EVID 40S
respectively. Do not use either bracket system for any other purpose. Never set anything on or
hang anything from the EVID 2.1 or EVID 40S enclosures when using the brackets.
Redundant safety point
As an added safety measure, it is suggested the user install an extra suspension point back to
the building structural supports. This redundant safety point should have as little slack as
possible (less than 1-inch is preferable).
Figure 1.1: Surface mount satellite speaker (left) and surface mount subwoofer (right) with safety cable
Ceiling mount speakers
!
Caution!
The seismic tab (auxiliary support ring) is not intended for primary suspension of the
loudspeaker. The seismic tab should only be used as a secondary safety point.
1
EVID Compact Sound Speaker System
2015.12 | 07 | F.01U.310.295 Installation Manual Electro-Voice
!
Caution!
Ceiling mount speaker’s safety cable
The safety cable should be installed with a minimum of 3-inches (76.2 mm) of slack.
Old electrical and electronic appliances
Electrical or electronic devices that are no longer serviceable must be collected separately and
sent for environmentally compatible recycling (in accordance with the European Waste
Electrical and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should use the return and collection
systems put in place in the country concerned.
en 5
Electro-Voice Installation Manual 2015.12 | 07 | F.01U.310.295
Introduction
The EVID Compact Sound Speaker System is a very compact full-range loudspeaker ideal for
applications requiring high-quality sound. Its shape flexibility and size make it nearly invisible
for use in background/foreground music systems for restaurants, bars, patios, retail, and other
applications. The system consists of a high performance 8-inch subwoofer module with a
crossover network to support the included four (4) 2-inch satellite speakers. The system
provides for easy signal connections at the subwoofer and can support either 4/8 ohm or
70/100v signal connections. Its high power handling allows the system to be used in a wide
variety of environments and spaces to provide high quality background or foreground music.
Read through this manual to familiarize yourself with the safety information, features, and
applications before you use these products.
System features
Common system features:
▪Available as a complete pre-packaged systems in either Ceiling mount or Surface mount
configurations.
▪Components can be combined in any mix of 4 satellite speakers to a single subwoofer to
meet décor or installation requirements.
▪Supports up to 100 W, 70/100 V, and 8 ohm audio connections.
Ceiling version features:
▪Quick-install design with captive mounting tabs to fit nearly any ceiling construction.
▪Four-pin Phoenix connectors on ceiling satellite speakers support pass-thru wiring.
▪UL 2043/1480 ratings allow for use in signaling applications and plenum air spaces.
▪Ceiling cutout templates and all mounting accessories included.
▪Available in white finish.
Surface-mount version features:
▪Simplified mounting design for satellites—concept provides secure mounting while
allowing for significant articulation and range of motion.
▪Attractive subwoofer design with full-face grille—install it anywhere, no need to hide!
▪Supports stereo operation with 8-ohm audio connections.
▪Quick-mount slide-on wall bracket included.
▪Available in black or white finishes.
2
2.1
EVID Compact Sound Speaker System
2015.12 | 07 | F.01U.310.295 Installation Manual Electro-Voice
System overview
Packing lists
Ceiling mount speakers
The EVID C44 speaker system package contains four (4) satellite speakers and one (1)
subwoofer. When you open the box for the full system you will find three (3) main boxes
inside; two (2) boxes for the satellite speakers and one (1) box for the subwoofer.
The major components included in one (1) box for the EVID C2.1 ceiling mount satellite
speaker.
Item Quantity Description
A 2 EVID C2.1 ceiling mount satellite speakers
B 2 Grilles
C 2 C-ring supports
D 1 Cutout template
E 1 Engineering data sheet
F 2 Paint shields
Table 3.1: Ceiling Mount Satellite Speaker
Figure 3.1: Components in kit
3
3.1
en 7
Electro-Voice Installation Manual 2015.12 | 07 | F.01U.310.295
The major components included in the box for the EVID 40C ceiling mount subwoofer:
Item Quantity Description
A 1 EVID 40C ceiling mount subwoofer
B 2 Tile rails
C 1 C-ring support
D 1 Grille
E 1 Installation manual
F 2 screws
G 1 Cutout template
H 1 Paint shield
Table 3.2: Ceiling Mount Subwoofer
Figure 3.2: Components in kit
EVID Compact Sound Speaker System
2015.12 | 07 | F.01U.310.295 Installation Manual Electro-Voice
Surface mount speakers
The EVID S44 speaker system package contains four (4) satellite speakers and one (1)
subwoofer. When you open the box for the full system you will find three (3) main boxes
inside; two (2) boxes for the satellite speakers and one (1) box for the subwoofer.
The major components included in one (1) box for the EVID 2.1 surface mount satellite
speaker.
Item Quantity Description
A 2 EVID 2.1 surface mount satellite speakers
B 2 Wall brackets
C 2 Speaker brackets
D 1 Engineering Data Sheet
E 2 M6 hex drive pan-head screws
F 4 M5 pan-head screws
G 2 Screw sockets
H 1 Hex wrench
Table 3.3: Surface Mount Satellite Speaker (1 box)
Figure 3.3: Components in kit
en 9
Electro-Voice Installation Manual 2015.12 | 07 | F.01U.310.295
The major components included in the box for the EVID 40S surface mount subwoofer:
Item Quantity Description
A 1 EVID 40S surface mount subwoofer
B 1 Wall bracket, assembled in box
C 1 Installation Manual
D 4 M6 hex drive pan-head screw
E 4 Rubber feet
F 1 Hex wrench
Table 3.4: Surface Mount Subwoofer
Figure 3.4: Components in kit
EVID Compact Sound Speaker System
2015.12 | 07 | F.01U.310.295 Installation Manual Electro-Voice
Ce manuel convient aux modèles suivants
8
Table des matières
Autres manuels Electro-Voice Système de haut-parleurs
Electro-Voice
Electro-Voice 100S Manuel utilisateur
Electro-Voice
Electro-Voice DeltaMax DMS-1122/85 Series Manuel utilisateur
Electro-Voice
Electro-Voice T251i Manuel utilisateur
Electro-Voice
Electro-Voice FRX+ 940 Manuel utilisateur
Electro-Voice
Electro-Voice Compact Full-Range Speaker EVID 4.2 Manuel utilisateur
Electro-Voice
Electro-Voice DeltaMax DML-1122A Series Manuel utilisateur
Electro-Voice
Electro-Voice EVA-2082S/906 Manuel utilisateur
Electro-Voice
Electro-Voice ECS 12-2 Manuel utilisateur
Electro-Voice
Electro-Voice SENTRY IV Guide des dimensions
Electro-Voice
Electro-Voice ZXA5 Manuel utilisateur
Electro-Voice
Electro-Voice Variplex II XL Manuel utilisateur
Electro-Voice
Electro-Voice FRi-2082 Manuel utilisateur
Electro-Voice
Electro-Voice SonicXJR Manuel utilisateur
Electro-Voice
Electro-Voice TL606DW Manuel utilisateur
Electro-Voice
Electro-Voice EVF-1152S/94 Manuel utilisateur
Electro-Voice
Electro-Voice TL15-1ES Manuel utilisateur
Electro-Voice
Electro-Voice TL440 Manuel utilisateur
Electro-Voice
Electro-Voice EVF-1122S/99-FG Manuel utilisateur
Electro-Voice
Electro-Voice S-1503ER Instructions de montage
Electro-Voice
Electro-Voice EVF-1152S/94-FG Manuel utilisateur
