Electro-Voice RE97TX Manuel utilisateur

Key Features:

• Ultra-Low Profile for Inconspicuous Use

• Lightweight, Durable

• Interchangable for Left or Right Ear

• Omnidirectional Polar Pattern Provides

Clean Sound and Uniform Response

General Description:

The Electro-Voice®RE97Tx is an Ultra-low profile,

omnidirectional, back-electret condensor headworn

microphone designed for use with standard EV and Telex

belt packs. The RE97Tx is intended for spoken word use

such as Houses of Worship, Corporate AV, Theatre, Fixed

Install, and other venues where a full-range, natural, well-

balancedsoundisrequired.Theomnidirectionalpolarpattern

of the RE97Tx provides a clean and accurate sonic quality

and uniform output regardless of the microphone’s position

relative to the sound source.

The RE97Tx is designed to be extremely flexible and easily

formed to fit over the ear of any user. The malleable boom

and earhook can be shaped to match virtually any contour.

The TA4F terminated cable is discretely routed behind the

user and attaches to the shirt collar with the elegant clothing

clipincluded, keepingthecableoutofthewayandpreventing

the microphone from being pulled off the user’s ear. The

supplied windscreen can be used in windy environments

and to reduce breath noise.

The RE97Tx comes with a shielded 4ft cable terminated in a

high quality TA4F connector. It is wired for use with standard

EVandTelexbeltpacksincluding the EV(BPU-2/CSB-1000)

and Telex (WT-500/WT-1000) bodypack transmitters and

operates from a 5VDC supply.

Technical Specifications:

RE97Tx

Micro-Headworn

Condenser Microphone

with TA4F Connector

:tnemelEgnitareneGtertcelekcab,resnednoC

:esnopseRycneuqerFzHk51–05

:nrettaPraloPlanoitceridinmO

zHk1,ytivi

tisneS :)tiucriCnepO( lacsaP/Vm0.4

:leveLgnippilCLPSBd521>

:esioNtnelaviuqEABd23

:egnaRcimanyDBd39

,ecnadepmIt

uptuO :zHk1 smho0003

:stnemeriuqeRrewoPCDV5

:noitpmusnoCtnerruCAu013

:ytiraloPmarhpaidnoerusserpevitisoP .2nip

noegatlovevitisopasecudorp

snoisnemiD.ni4.3:)deppihssa(htgnelmooB )mm4.68( )mm00.2(.ni080.0:retemaidmooB )

mm50.3(.ni021.0:retemaideluspaC )mm03.2(.ni090.0:retemaidkoohraE

:elbaC)mm59.1(.ni770.0,gnol)m22.1(tf4 re

temaid

:gniriWrotcennoCdleihS,dnuorG–1#niP oiduA–2#niP egatloVsaiB–3#niP C/N–4#niP

:dehsinruFseirosseccAneer

csdniW pilCgnihtolC gaBgiG

:roloCkcalB,nworB,egieB

:thgieWteN)g71(.zo6.0 )g7.5(.zo2.0:ylnociM

Figures 1 through 3 show the ideal position of the microphone in use. The end of the boom should be located

approximately ½” (13mm) back from the corner of the mouth and as close to the face as possible. This position

will optimize the signal to noise ratio and minimize the acoustic effects of breath noise.

Themicrophone cable is routed

behind the neck of the user and

secured in place with the supplied

clothing clip as shown in Figure 4

and 5. Allow some slack in the cable

toenable the user’shead complete

range of motion in both directions

without pulling the cable from the

clothing clip.

Application Notes:

Figure 1 Figure 2 Figure 3

Figure 4 Figure 5

Figure 6 Figure 7

Fitting:

1.Shape the boom: Figure 6 showsthe microphone boomas received. Before placingthe microphone over the

user’s ear, apply a slight bend to the boom, starting at the middle of the earhook, to aid the microphone boom in

forming to the user’s face.

The boom can be easily straighten by pinching between the thumb and forefinger, and applying pressure as

your fingers slide away from the earhook. The boom can be reshaped countless times without ill effect on the

performanceof the microphone or degradationofthe mechanical structure.

2. Fit to ear: Place the microphone over the ear. Press on the earhook from all sides to form it to the contour of

the ear. The shape of the earhook, as shipped, is designed to comfortably fit many users without adjustment.

To make the fit to the ear more secure, press on the top and bottom of the earhook using thumb and forefinger.

3.Adjust boom length:

If the microphone is positioned too close or too far away from the corner of the mouth (See Figures 1-3 for ideal

position), the boom length can be easily changed by reshaping the bend at the earhook. Figure 9 shows the

microphone as received. To bring the microphone closer to the mouth (i.e. lengthen the boom), simply straighten

out the bend at the earhook (Figure 10), and reapply the bend further up the earhook (Figure 11). To move the

microphone further away from the mouth (i.e. shorten the boom), follow the same procedure, but reapply the

bend further down the length of the boom. Changing the length of the boom will likely require re-shaping of the

microphone to the ear for optimum comfort.

Figure 8

Figure 10

Figure 9

Figure 11

Frequency Response:

12000 Portland Avenue South, Burnsville, MN 55337

Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

Part Number 38110-437 Rev A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/553-5992 or 402/467-5321

For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656

Specifications subject to change without notice.

Polar Response:

Dimensions:

Windscreen Assembly:

Windscreen is supplied with the molded plastic adaptor

alreadyinstalled.

Hold windscreen on the sides at the “A” locations.

Firmly press microphone into adaptor until it stops.

RE97TxMic

Windscreen Adaptor

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Electro-Voice Microphone

Electro-Voice

Electro-Voice N478 Manuel utilisateur

Electro-Voice

Electro-Voice RE90H Manuel utilisateur

Electro-Voice

Electro-Voice RE20 Manuel utilisateur

Electro-Voice

Electro-Voice RE92TX Manuel utilisateur

Electro-Voice

Electro-Voice RE3-BP0L-T Manuel utilisateur

Electro-Voice

Electro-Voice N468 Manuel utilisateur

Electro-Voice

Electro-Voice DL42 Manuel utilisateur

Electro-Voice

Electro-Voice RE3 Series Manuel utilisateur

Electro-Voice

Electro-Voice 611 Guide des dimensions

Electro-Voice

Electro-Voice RE200 Manuel utilisateur

Electro-Voice

Electro-Voice N868 Manuel utilisateur

Electro-Voice

Electro-Voice 649B Manuel utilisateur

Electro-Voice

Electro-Voice Cobalt Co11 Manuel utilisateur

Electro-Voice

Electro-Voice 635 Manuel utilisateur

Electro-Voice

Electro-Voice RE10 Manuel utilisateur

Electro-Voice

Electro-Voice 625HS Manuel utilisateur

Electro-Voice

Electro-Voice 645TR Manuel utilisateur

Electro-Voice

Electro-Voice RE90L Manuel utilisateur

Electro-Voice

Electro-Voice 630 Manuel utilisateur

Electro-Voice

Electro-Voice HM1 Manuel utilisateur

Electro-Voice

Electro-Voice RE36N/D Manuel utilisateur

Electro-Voice

Electro-Voice RE90B/BW Manuel utilisateur

Electro-Voice

Electro-Voice PC Boundary Manuel utilisateur

Electro-Voice

Electro-Voice CS200 Manuel utilisateur

Manuels Microphone populaires d'autres marques

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuel utilisateur

DAPAudio

DAPAudio RM-101 Manuel utilisateur

AKG

AKG CHM 21 Manuel utilisateur

Sennheiser

Sennheiser evolution wireless series EM 100 Manuel utilisateur

Sony

Sony C-48 Manuel utilisateur

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuel utilisateur

Shure

Shure WH30TQG Manuel utilisateur

auna PRO

auna PRO MIC-900 Manuel utilisateur

AKG

AKG D 3800 Manuel utilisateur

Shure

Shure KSM141 Manuel utilisateur

MAIIN SOUND

MAIIN SOUND IIN style Manuel utilisateur

Earthworks

Earthworks TC25 Manuel utilisateur

Sennheiser

Sennheiser evolution D1 Manuel utilisateur

Alesis

Alesis MicLink Wireless Manuel utilisateur

DSPPA

DSPPA D6234 Manuel utilisateur

Monacor

Monacor IMG STAGELINE ECM-300B Manuel utilisateur

Ansr Audio

Ansr Audio Scan16 Manuel utilisateur

Shure

Shure MXA710 Series Manuel utilisateur