MOP-D10
Isolated Multi-Output Power Supply
Congratulations on your purchase of the Electro-Harmonix MOP-D10 power supply. The
MOP-D10 features ten isolated 9VDC outputs for powering effects pedals and other musical
instrument accessories. Maximum output current on each output ranges from 100mA to
400mA: 4x100mA, 2x250mA, 2x300mA, 2x400mA.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with a dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Connect the device to a MAINS socket outlet with a protective earthing connection.
Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
Protect the power cord from being walked on or pinched.
Unplug this device during lightning storms or when unused for long periods of time.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Do not expose this apparatus to dripping or splashing and ensure that no object filled with liquids is
placed on the equipment.
Please keep the following conditions:
oMaintain at least 6in. (15cm) of unobstructed air space on either side of the unit to allow for
proper ventilation and cooling. Air must be capable of freely moving around the device.
oThe ventilation should not be impeded by covering the ventilation openings with items such
as newspapers, tablecloths, curtains, etc.
oNo naked flame sources, such as lighted candles should be placed on the apparatus.
oApparatus is not for use in tropical climates.
Refer all servicing and maintenance to qualified service personnel including replacement of fuses.
Changes and modifications not expressly approved by EHX can void the warranty.
DO NOT attempt to open the chassis. There are no user serviceable parts.
When installing this product be sure to use the supplied mounting hardware. If parts other than
those supplied are used, the unit may be damaged internally, or may not be held in place securely
and become dislodged.
The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
the product.
This equipment is not suitable for use in locations
where children are likely to be present.
