Page 8 of 11
which should be 20Wminimum. The centre speaker should be rated
at 15Wminimum. For best results, use speakers that are matched
for best sensitivity.
Cable used should be capable of passing the required power.
Thicker, higher qualitycable will give better results.
Warning:
The centre speaker and the front speakers must be magnetically
shielded iftheyare placed near a Television. If this is not observed,
the cathode raytube inside the TV will suffer.
Listening to theSS20202014
When you first listen to you surround sound amplifier; you need to
adjust it to the settings you prefer. Connect it up to you TV, VCR
etc. and find a good movie! More recent movies have the best
surround sound codingand these should be used.
If you are using the internal decoder, you mayadjust the volume,
bass, treble and use the loudness to suit your needs on all
channels. A good test movie should make use ofall frequencies so
you can adjust the bass and treble to the best possible preference.
The loudness can be used to increase the high and lowfrequencies
slightlywhen listening at lowvolumes.
You will notice that when there is speaking, sound onlycomes from
the front and centre channels. When there is action or music in the
movie, there should be sound from the rear channel. If this is not so,
make sure you are feeding the unit with a stereo signal (i.e.
NICAM® or that the movie is not old (and therefore onlymono).
Modern music is also stereo and this surround sound unit can add
another dimension to manytypes of music from rock, pop to recent
classic.
