ElectrIQ HSL600 Manuel utilisateur
HSL600 Slow Juicer and Nutrition Centre
USER MANUAL
Thank you for choosing ElectrIQ.
Please read this user manual before using this appliance
and keep it safe for future reference.
Visit our page www.electrIQ.co.uk for our entire range of Intelligent Electricals
Contents
Features 3
Safety Instructions 4
Package Content 5
Parts 6
Assembly and Operation 7
Fruits and Vegetables Nutrition Tables 17
Cleaning and maintenance 21
Troubleshooting 22
Recipes 24
2
FEATURES
ElectrIQ Slow masticating juicer HSL600 juices fruits, vegetables, grasses, leafy greens or creates
delicious nut milks
Refreshing design to complement any kitchen
Low power 150 watts DC motor that spins at only 80 RPM ensuring fruits and vegetable are
mechanically pressed without adding friction heat, preventing juice oxidation while retaining
maximum nutrients
Horizontal design maximizes leafy greens and wheatgrass juice extraction
Low Noise due to slow press system
Super strong auger and juicing screen
BPA Free Plastic
High Juice Yield and Less Waste
Easy to Assemble and Store
Large Juice and Pulp Containers
Low noise due to slow pressing system
Easy to clean and dishwasher Safe
Nutrition Center *
The HSL600 Nutrition Centre is the most versatile kitchen appliance you ever owned
Apart from Juicing, now you can enjoy:
Slicing Fruits and Vegetables
Grating nuts and cheeses
Mincing Dried Fruits, Nuts and Meat
Making Vegetarian or Meat Sausages
Making Pasta and Noodles
* with the optional Nutrition Centre Essential Accessories Pack (HSL600-ACC) you can transform
the versatile HSL600 in a Grater / Slicer, Mincer, Sausage and Pasta Maker
Note: Due to continuous product development, products may not exactly correspond to the
illustrations in this manual
3
SAFETY INSTRUCTIONS
Important
• Carefully read the instructions before operating the unit
• This appliance is for indoor use only
• Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet Always
check the rating label against your electrical supply
• If you are in any doubt about the suitability of your electrical supply have it checked and,
if necessary, retested by a qualified electrician
• This juicer has been tested and is safe to use However, as with any electrical appliances -
use it with care
• Disconnect the power plug from socket before dismantling, assembling or cleaning
• Do not clean the unit by spraying it or immersing it in water
• Never operate this appliance if the cord or plug is damaged Ensure the power cord is not
stretched or exposed to sharp object/edges
• Do not pull the mains cable to disconnect the mains plug from the mains
• Do not use the appliance if any part or any accessory is damaged or defective
• A damaged supply cord or plug should be replaced by the manufacturer or a qualified
electrician in order to avoid a hazard
• Avoid touching any moving parts of the appliance
• Never insert fingers, or any other objects apart from the food pusher though the feeder
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities It is also not intended for use by those with a lack of
experience and knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety
• Do not leave children unsupervised with this appliance
• Any service other than regular cleaning should be only performed by an authorized service
representative Failure to comply could result in a voided warranty
• Do not use the appliance for any other purposes than its intended use
• Always place the unit on a dry and stable surface
• Do not use the appliance in places with high humidity (>80%RH)
• Do not immerse the appliance in water or other liquids If the appliance is immersed in
water or other liquids by mistake, do not touch the appliance with your hands Immediately
remove the mains plug from the wall socket If the appliance is immersed in water or other liquids,
discard it
Unit Safety Protection and Performance Tips
• Make sure the unit is correctly assembled and the safety locks engaged
• When using the appliance take regular breaks to avoid motor overheating
• Always clean the appliance and accessories immediately after use
4
PAC AGE CONTENTS
HSL600 Slow Juicer
1x Cold Press Juicer
1x Instruction Manual
1x Juice Tank
1x Pulp Tank
1x Cleaning Brush
1x Cold Press Juicer
Optional HSL600-ACC Accessories Pack
1 x Chopper with 2 blades
1x Mincer
1x Sausage Attachment
3 x Pasta / Noodles Attachment
1x Cleaning Brush
Account for all parts before disposing packing Safely dispose of all plastic bags and other
packaging components They may be potentially dangerous to children
5
PARTS AND ASSEMBLY
Slow Juicer
1 Power cable
2 Juicer Main Body
3 Power Switch (On/Off/Reverse)
4 Accessory Lock Release
5 Juice Container
6 Foam Separator
7 Pulp Container
8 Pusher
9 Ingredients Tray
10 Juice Extractor body
11 Auger
12 Juicing Screen
13 Juice Extractor Head
HSL600-ACC Accessories Pack (Optional)
14 Mincer / Pasta maker body
15 Mincer Auger
16 Cutting blade
17 Grinding plate
18 Cover
19 Pasta / Noodle Plates (19-21)
22 Sausage Maker Tube
23 Chopper pusher
24 Fruit / Vegetables Chopper
25 Chopper Blades (25-26)
6
Initial use
Preparation
• Clean the appliance and accessories before first use
• Wash the juicer body and head, juicing screen, auger, pusher, juice cup and pulp cup in
warm soapy water with a soft cloth or nylon brush Rinse and dry thoroughly Also refer to the
section "Cleaning and maintenance"
Assembly and Operation
Before assembly or disassembly, switch off the appliance, remove the mains plug from the wall
socket and wait until the appliance has cooled down
This appliance has a built-in safety lock (4); this feature ensures that you can only switch on the
appliance if you have assembled the juicer correctly on the motor unit When assembled
correctly, the built-in safety lock will be unlocked
Assembling the Juicer
Before you assemble the juicer, ensure that the power cord is unplugged Place the juicer base
on a flat dry surface such as a worktop
1
Attach the extractor body (10) to the HSL600 base (2)
Make sure the juicer body triangle mark is aligned with the
triangle mark of the extractor before rotating the extractor
body
Rotate the extractor counterclockwise until it clicks in being
secured by the accessory lock (4)
2
Align the hexagonal shaft of the auger (11) in the frame of the
extractor (10) and push it into place (slightly rotate the auger
to make sure you got a good alignment)
3
Slide the juicing screen (12) into the end of the auger (11)
making sure is properly pushed down Make sure you do not
skip this step as using the juicer without juicing screen may
damage the extractor.
4 Align the juice extractor head (13) with the keys on the juice
extractor body and twist the extractor head by rotating it
7
counterclockwise making sure is fully locked
5
Place the juice container (5) in the recessed placeholder
along the juicer base body making sure the juice dispensing
outlet is directly above If you want a foam free juice insert
the foam separator in the juice container prior to use
6
Align the pulp container (7) with the juice container (5)
making sure the juice extractor head (13) is centred above the
pulp container
7
Mount the ingredients tray (9) onto the juice extractor feeder
The tray will facilitate the loading of small fruits e g grapes,
strawberries, blueberries, pomegranates etc
Operation
1
Once the HSL600 is correctly assembled (see Assembling the
Juicer) connect to the power outlet and get ready to juice
Ensure the switch is on off central position before plugging in
the unit
2
Power on Operation Description
There are 3 settings on the power button
Top: ON
Middle: OFF
Down: Reverse
ON for normal juicing, chipping, mincing, pasta making etc
press the ON button
Press OFF middle button to stock the unit
Use REVERSE if there is any food blockage or motor locking
Press and hold the REVERSE for 3-5 seconds This should
8
resolve the issues Releasing the REVERSE button will resume
normal operation
3
Wash and prepare your fruits, leaves and vegetables Cut
them it into pieces small sufficiently to pass through the
feeder, use the feeder tray for small fruits
There is no need to cut the
Any hard core, hard seeds (e g peaches, apricots), skin or
shell (e g pineapple) shall be removed in advance
4
Press down ON button Machine will start operating after a
2-3 seconds delay Return to OFF position after maximum 30-
45 minutes of use
Load the ingredients into the feeder tube and use the pusher
(8) to help them progressing in the extractor
5
When you stop juicing, turn off and disconnect the appliance
Wait until all the juice flows into the juice container
Do not remove the juice container before the auger have
stopped rotating completely
Juice tastes best straight from the juicer
9
Optional Accessories Assembly and Operation
The HSL600-ACC kit will transform your juicer in a true Nutrition Centre that will enable you to
easily cook a variety of foods Please find assembly / operation instruct
Mincer, Pasta/ Noodle/ Sausage Maker
Slide the juicing screen (12) into the end of the auger (11) making sure is properly pushed down
Make sure you do not skip this step as using the juicer without juicing screen may damage the
extractor
1
Attach the mincer body (14) to the HSL600 base (2)
Make sure the body triangle mark is aligned with the triangle
mark of the mincer before rotating the mincer body
Rotate the mincer counterclockwise until it clicks in being
secured by the accessory lock (4)
2
Align the hexagonal shaft of the mincer auger (15) in the
frame of the mincer body (14) and push it into place (slightly
rotate the auger to make sure you got a good alignment)
3
Position the cutting blade onto the mincer auger (15), with
the square hole in the center of the cutter embedded into the
square convex plate on the top of the screw
4
Make sure the grinding plate (17) is clean and in position over
the cutting blade (16)
The mincer body has guide keys and the blade will slot into
them
10
Autres manuels pour HSL600
1
Table des matières
Autres manuels ElectrIQ presse-agrumes
