Elecable MS9132 Manuel utilisateur

USB to HDMI Adapter/Cable

(MS9132)

User Manual

(03/03/2023 update)

The USB to HDMI adapter lets you connect your laptop or desktop

computer to an HDMI monitor or projector using a single USB Type-A or

Type-c port | 1920x1080P@60Hz Video | 2ch audio (through HDMI) .

Functioning as an external graphics card, this USB to HDMI adapter

provides a convenient way to add multi-monitor capability to a USB or

USB C enabled desktop or laptop computer.

Important Note:

• This USB to HDMI adapter supports both mirroring and extending modes for

MacBook(M1/M2), macOS 10.14 and later, Windows10/11

• For WINDOWS7/8, there are only beta version. Just supports Duplicate (Mirror) model for the

second monitor.

• Does Not Support Android phone or iOS iPad, and Linux OS, Chromebook.

• The driver installation is required. You can download the latest driver from

http://bit.ly/elecable

Setup the Adapter for Windows

NOTE: Before you can begin connecting an additional display, you must

install a driver for the adapter cable. Please follow these instructions

1. Install Driver

ü You can download the latest driver from the link

http://bit.ly/elecable select the correct driver for your adapter.

ü Double click on the driver file to start the installation process.

ü Follow the steps to complete the installation.

ü Once the installation is complete, please reboot your computer.

NOTE:

ü If you are working on a company computer, contact your IT

specialist to log in as an Administrator having the rights to install

the driver.

ü If the driver was not successfully installed, please temporarily

turn off real-time antivirus protection, then reinstall it.

ü Uninstall other USB graphics drivers (such as SMSC, Fresco

Logic, MCT, and DisplayLink), they cannot be used on your PC

simultaneously.

2. Connect the Adapter

ü Connect the USB end to your computer's USB3.0 port. Install the

driver correctly.

ü Connect the HDMI end to your display’s HDMI port, then turn on

your monitor. Confirm this HDMI port that is input source.

NOTE:

Some laptops don’t have enough juice to push the extra pixels of an

external display, connect the power adapter to give it additional power.

Configure the Display

By default, computer should automatically detect external displays, and

will automatically adjust the screen resolution. Sometimes, things don’t

go smoothly, you may still need to select the appropriate mode and

adjust your resolution manually.

Extend or duplicate the desktop with a second monitor.

Press the Windows logo key + P on your keyboard. Select a display

option according to your needs:

Duplicate (Mirror) — Show the entire desktop on both displays. The

second monitors mirror the primary monitor. The maximum resolution is

limited to the lowest resolution monitor attached to the system.

Extend — Both monitors combine to offer an extended desktop. The

desktop screen of your PC is extended across all the detected monitors

and allows you to have a desktop screen that spans across all monitors.

The mouse can move between monitors.

Adjust the Screen Resolution

If you experience problems, such as having one of the displays functions

at the wrong resolution. Right click an empty area on the desktop, and

then click Display settings. From there, you can adjust the screen

resolution and orientation, as necessary.

In Windows 10

In the Resolution drop-down menu, select a screen resolution (ex: 1920

x 1080) that you want for the selected monitor. Choose between

landscape or portrait to change the selected display orientation.

The Multiple displays option allows you to switch display modes (as

described in the section above). If the selected screen resolution mode

is optimal, click Keep Changes.

Setup the Adapter for Mac OS

1. Install Driver

1. Download the driver from the link http://bit.ly/elecable select the

correct driver for your operating system.

2. Double click on the driver file to start the installation process.

3. Follow the steps to complete the installation.

4. Once the installation is complete, please reboot your computer.

NOTE#1: Mac OS High Sierra 10.13 and later introduces a new feature that

requires user approval before loading new third-party kernel extensions. Go

to System Preferences - Security & Privacy and click Allow.

NOTE#2: In macOS you also will need to enable screen recording.

macOS 10.15+ requires the user to permit "Screen Recording" before

the USB-to-Video adapter will work correctly.

To e n abl e " S c ree n Re c o rdi n g" f ol l ow t he s e s t e ps :

1. Download and install the latest driver from this support site.

2. Reboot your system.

3. Open System Preferences from the Apple menu.

4. Select Security & Privacy.

5. Select the Privacy tab.

6. Click on the Lock to make changes

7. Follow the prompt to enter your password and allow changes.

8. Click the check box next to ms_usbdisplay.

9. Click on the Lock again to save the changes.

10. A dialog will appear with buttons Later and Quit No

11. Click Quit Now

12. You may need to reboot your system again if the USB-to-Video

adapter doesn't work.

2. Connect the Adapter

1. Connect the HDMI port to your display’s port, then turn on your

monitor.

2. Connect the USB end to your computer's USB3.0 port. Waiting a few

seconds, your PC will automatically detect the second monitor and

display your PC's desktop screen.

NOTE:

Some laptops don’t have enough juice to push the extra pixels of an

external display, connect the power adapter to give it additional power.

3. Configure the Display

(You can also visit website https://support.apple.com/en-sg/HT202351)

When attaching a display that the software has not seen before, the

display will default to being extended to the right of the main display.

To c o nfi g ur e th e se t ti n gs f or e ach of you r USB at t ach e d d i spl a ys, select

‘Displays’ from the ‘System Preferences’ menu. This will open a

‘Display Preferences’ window on each of your attached displays

allowing you to configure each display as required.

It is possible to use the ‘Gather Windows’ button to bring all the ‘Display

Preferences’ windows onto the main display.

Setting the Display Resolutions

To c h ang e th e di s pl a y ’s re s olu t io n , s e lec t a n av a i la b le r es o l ut i on f ro m

the Display Preferences window of the display you wish to change:

The resolutions available depend on both the enabled product and the

capabilities of the connected display.

If you wish to rotate your display, you can configure the orientation

using the ‘Rotate’ drop down. Select the appropriate angle of rotation to

match your display’s set up.

Setting the Position of Displays

If your computer is connected to more than two displays, you can

specify that some are mirrored displays and others show the extended

desktop. A mirrored display shows the same content as the main

display whereas an extended display will be an extension to your

existing desktop. You can arrange your displays so that they match the

physical layout of your displays by selecting the ‘Arrangement’ pane

within Display Preferences. This ensures that you can easily navigate

between all connected displays.

To m o v e t h e p o si t io n of a d i sp l ay, c li c k a n d hold the display you wish to

move then drag it to the desired position. The display will be highlighted

with a red border whilst you are moving the display to its new position.

SETTING THE DISPLAY TO EXTEND MODE

To e x ten d co n nec t ed d isp l ays , ma k e s u r e t hat th e “ M i rro r Di s pl a y ” o n

the ‘Arrangement’ pane is unchecked.

SETTING THE DISPLAY TO MIRROR MODE

When in Mirror mode, additional displays will display what is being

shown on the primary display. Checking the “Mirror Display” on the

‘Arrangement’ pane enables this feature.

Table des matières

Autres manuels Elecable Adaptateur

Elecable

Elecable USB to HDMI/DP 4K Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur