Elation ELARQUADBAR Manuel utilisateur

ELAR%QUAD%BAR™%

User%Manual%2.0% %

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!2%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!3%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

CONTENTS

General Information

Safety Instructions

General Guidelines

Features

Fixture Overview

Mounting and Installation

Understanding DMX

Fixture Menu

DMX Channel Values

Cleaning and Maintenance

Photometric Data

Dimensional Drawings

Circuit Schematic

Warranty

Technical Specifications

Optional Accessories

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!4%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

1. GENERAL INFORMATION

INTRODUCTION

Congratulations, you have just purchased one of the most innovative and reliable lighting

fixtures on the market today! The ELAR QUAD BAR™has been designed to perform

reliably for years when the guidelines in this booklet are followed. Please read and

understand the instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information regarding safety

during use and maintenance.

IP65 RATED

An IP rated lighting fixture is one, which is commonly installed in outdoor environments

and has been designed with an enclosure that effectively protects the ingress (entry) of

external foreign objects such as dust and water. The International Protection (IP) rating

system is commonly expressed as "IP" (Ingress Protection) followed by two numbers (i.e.

IP65) where the numbers define the degree of protection. The first digit (Foreign Bodies

Protection) indicates the extent of protection against particles entering the fixture and the

second digit (Water Protection) indicates the extent of protection against water entering

the fixture. An IP65 rated lighting fixture such as the ELAR QUAD BAR™is one which

has been designed and tested to protect against the ingress of dust (6) and high

pressure water jets from any direction (5).

UNPACKING

Thank you for purchasing the ELAR QUAD BAR™by Elation Professional®. Every

ELAR QUAD BAR™has been thoroughly tested and has been shipped in perfect

operating condition. Carefully check the shipping carton for damage that may have

occurred during shipping. If the carton appears to be damaged, carefully inspect your unit

for damage and be sure all accessories necessary to operate the unit have arrived intact.

In the event damage has been found or parts are missing, please contact our customer

support team for further instructions. Please do not return this unit to your dealer without

first contacting customer support at the number listed below. Please do not discard the

shipping carton in the trash. Please recycle whenever possible.

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!5%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

BOX CONTENTS

•(1) IP68 Rated Power Cable

•(1) 3-Pin XLR Cable

•(1) Omega Bracket & (8) Mounting Screws

•(1) Safety Cable

•Manual & Warranty Card

MANUAL UPDATES

Please check www.elationlighting.com for the latest revision/update of this manual.

CUSTOMER SUPPORT

Elation Professional®provides a customer support line, to provide set up help and to

answer any question should you encounter problems during your set up or initial

operation. You may also visit us on the web at www.elationlighting.com for any

comments or suggestions. For service related issue please contact Elation

Professional®. Service Hours are Monday through Friday 8:00 a.m. to 5:00 p.m. PST.

Voice: 323-582-3322 Fax: 323-832-9142

E-mail: [email protected] Forum: www.ElationLighting.com/forum

WARRANTY REGISTRATION

The ELAR QUAD BAR™carries a two year (730 days) limited warranty. Please fill out

the enclosed warranty card to validate your purchase. All returned service items whether

under warranty or not, must be freight pre-paid and accompany a return authorization

(R.A.) number. The R.A. number must be clearly written on the outside of the return

package. A brief description of the problem as well as the R.A. number must also be

written down on a piece of paper and included in the shipping container. If the unit is

under warranty, you must provide a copy of your proof of purchase invoice. Items

returned without a R.A. number clearly marked on the outside of the package will be

refused and returned at customer’s expense. You may obtain a R.A. number by

contacting customer support at 323-582-3322.

IMPORTANT NOTICE!

There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself; doing so will void your manufactures warranty. Damages resulting from

modifications to this fixture and/or the disregard of safety and general user

instructions found in this user manual void the manufactures warranty and are

not subject to any warranty claims and/or repairs.

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!6%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

2. SAFETY INSTRUCTIONS

The ELAR QUAD BAR™is an extremely sophisticated piece of electronic

equipment. To guarantee a smooth operation, it is important to follow the

guidelines in this manual. The manufacturer of this device will not accept

responsibility for damages resulting from the misuse of this fixture due to the

disregard of the information printed in this manual.

•For stage operation, follow the Mounting and Installation guide described in Chapter 6

of this manual. Operating the fixture without suited safety aids such as safety cables

and/or clamps can increase the risk of damage and/or personal injury.

•Installation should only be performed by qualified and certified personnel.

•When mounting this fixture, use only the original rigging parts included with this fixture.

Any structural modification will void the original manufactures warranty and may

increase the risk of damage and/or personal injury.

•Those suffering from EPILEPSY should avoid looking directly into the light source of

this unit at all times.

•Never look directly into the light source of this fixture. You risk injury to your retina,

which may induce blindness.

•Do not attempt to operate this fixture if the power cord has become damaged or

frayed. Be sure the power cord is never crimped and/or damaged. If the power cord is

damaged, replace it immediately with a new one of similar power rating.

•This device falls under protection-class 1; therefore it is essential that this device be

grounded properly. Only qualified personnel should perform all electrical connections.

Be sure the available voltage matches the voltage requirements of this device.

•Always disconnect fixture from main power source before performing any type of

service and/or cleaning procedure. Only handle the power cord by the plug end.

Never pull out the plug by tugging the wire portion of the cord.

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

3. GENERAL GUIDELINES

•NEVER OPEN THIS FIXTURE WHILE IN USE!

•During the initial operation of this fixture, a light smoke or smell may emit from the

interior of the fixture. This is a normal process and is caused by excess paint in the

interior of the casing burning off from the heat associated with the lamp and will

decrease gradually over time.

•This fixture is a professional lighting effect designed for use on stage, in nightclubs,

theatres, etc. Do not attempt installation and/or operation without proper knowledge

of how to do so.

•Do not permit operation by persons who are not qualified for operating this type of

theatrical fixture. Most damages are the result of operations by nonprofessionals.

•Consistent operational breaks may ensure the fixture will function properly for many

years to come.

•Do not shake fixture, avoid brute force when installing and/or operating the device.

•Always install the fixture with an appropriate safety cable. When installing the fixture

in a suspended environment, always use mounting hardware that is no less than M10

x 25 mm, also be sure the hardware is insert in the pre-arranged screw holes in the

base of the fixture.

•Please use the original packaging and materials to transport the fixture in for service.

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!8%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

4. FEATURES

•4 x 10W Cree Quad LEDs

•100,000 Hours Rated LED Life*

*May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns

(On-Off Cycling), Control, and Dimming.

•IP65 Rated Die Cast Aluminium Body

•USITT DMX 512 with 4, 5, 8, 10, and 16 DMX Channel Operation

•Strobe-Effect with 1-18 flashes per second

•0-100% Dimming and Blackout for all LEDs

•Excellent Color Mixing and Rainbow Effect

•Single Pixel Control Mode

•Flicker Free Operation for TV and Film

•Built In Color Macros, Auto & Manual Control

•Full Color LCD Menu Control Display And Touch-Panel

•Reversible Control Display Option (180º Flip)

•Power In/Out Linkable

•Holds Last State When Power Off

•Software Upload by Optional Accessory via DMX line

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!9%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

5. FIXTURE OVERVIEW

1. LED Array – Group of (4) LEDs

2. Mounting Ears / Omega Bracket – Used to mount fixture.

3. Power In – Power connection (powerCON) to power source.

4. 3-Pin DMX In – Accepts incoming DMX signal via a male 3-pin XLR jack.

5. LCD Menu Control Display – Full color LCD animated menu display.

6. MODE/ESC Button – Used to access the menu functions and exit the current command.

7. ENTER Button – Used to enter into or lock a certain menu function.

8. LEFT Button – Used to toggle through the menu display.

9. DOWN Button – Used to toggle down or back through the menu functions and settings.

10.RIGHT Button – Used to toggle through the menu display.

11.UP Button – Used to toggle forward through the menu functions and settings.

12.3-Pin DMX Out – Used to send incoming DMX signal to the next fixture in the DMX chain

via a female 3-pin XLR jack.

13.Power Out – Power connection to daisy chain to another unit.

1: LED Array

2: Mounting Ears/Omega Bracket

3: Power IN

4: 3-Pin DMX IN

5: LCD Menu Control Display

6: MODE/ESC Button

7: ENTER Button

8: LEFT Button

9: DOWN Button

10: RIGHT Button

11: UP Button

12: 3-Pin DMX OUT

13: Power OUT

www.elationlighting.com%

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!10%%%%%%%%%%%%%%%%ELAR!QUAD!BAR™!User!Manual!2.0

6. MOUNTING AND INSTALLATION

The$electric$connection$must$only$be$carried$out$by$a$qualified$electrician.$

CAUTIONS

•The recommended temperature for this fixture is -13°F to 113°F (-25°C to 45°C).

Do not use the fixture under or above this temperature.

•For added protection, mount the fixture in areas outside walking paths, seating areas, or

in areas were unauthorized personnel might reach the fixture.

•Before mounting the fixture to any surface, make sure the installation area can hold a

minimum point load of 10 times the weight of the fixture.

(150* lbs / 680* kgs - *Includes Omega Bracket)

•Fixture installation must always be secured with a secondary safety attachment, such as

an appropriate safety cable.

•Never stand directly below the device when mounting, removing or servicing the fixture.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Elation Projecteur

Elation

Elation E Spot Led Manuel utilisateur

Elation

Elation ELAR EXFLOOD Manuel utilisateur

Elation

Elation Opti 30 RGB Manuel utilisateur

Elation

Elation Active Scan 250 Manuel utilisateur

Elation

Elation PALADIN Manuel utilisateur

Elation

Elation PROTEUS LUCIUS PRL546 Manuel utilisateur

Elation

Elation Design LED 36MH Manuel utilisateur

Elation

Elation Design LED 72MKII Manuel utilisateur

Elation

Elation VISION 575 Manuel utilisateur

Elation

Elation EVENT BAR Manuel utilisateur

Elation

Elation TVL2000 II Manuel utilisateur

Elation

Elation Arena Par CW Manuel utilisateur

Elation

Elation Design LED 108IP Manuel utilisateur

Elation

Elation VISION 250 Manuel utilisateur

Elation

Elation WW PROFILE Manuel utilisateur

Elation

Elation DW CHORUS 24 Manuel utilisateur

Elation

Elation CMY Zoom 250 Manuel utilisateur

Elation

Elation DLED Par Zoom Manuel utilisateur

Elation

Elation Waterfall 250 Manuel utilisateur

Elation

Elation DESIGN PROMO 360 Manuel utilisateur

Elation

Elation POWER SPOT 700CMY II Manuel utilisateur

Elation

Elation ARENA PAR ZOOM Manuel utilisateur

Elation

Elation Color Tone 50 Instructions d'installation

Elation

Elation RAYZOR BEAM 2R Manuel utilisateur

Manuels Projecteur populaires d'autres marques

VIZULO

VIZULO Micro Martin Guide de l'utilisateur

EuroLite

EuroLite LED IP FL-100 SMD Manuel utilisateur

Cooper Wheelock

Cooper Wheelock XB12 Manuel utilisateur

Allen + Roth

Allen + Roth 17624-000 Manuel utilisateur

ADJ

ADJ 4 STAGE PAK Manuel utilisateur

Cooper Lighting

Cooper Lighting EGL91SW233 Manuel utilisateur

Max

Max 37496 Manuel utilisateur

BEGA

BEGA 85 143 Manuel utilisateur

Beamz

Beamz 151.226 Manuel utilisateur

EuroLite

EuroLite LED IP FL-8 Manuel utilisateur

Ledj

Ledj PERFORMER 36 RGB Manuel utilisateur

Perel

Perel ELS3 Manuel utilisateur

Perel

Perel ELS3WD Manuel utilisateur

LumX

LumX LM 36130 Manuel utilisateur

Xtricity

Xtricity 4-80053 Manuel utilisateur

Stahl

Stahl 6521/4 Series Manuel utilisateur

Ecosense

Ecosense EcoSpec Manuel utilisateur

Ayrton

Ayrton minipanel FX Manuel utilisateur