Elation SMARTY MAX Manuel utilisateur

™

user manual

images, and instructions herein are subject to change without notice. ELATION

PROFESSIONAL logo and identifying product names and numbers herein are trademarks of

ELATION PROFESSIONAL. Copyright protection claimed includes all forms and matters of

copyrightable materials and information now allowed by statutory or judicial law or

hereinafter granted. Product names used in this document may be trademarks or

registered trademarks of their respective companies and are hereby acknowledged. All

non-ELATION brands and product names are trademarks or registered trademarks of their

respective companies.

ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities

for property, equipment, building, and electrical damages, injuries to any persons, and direct

or indirect economic loss associated with the use or reliance of any information contained

within this document, and/or as a result of the improper, unsafe, insufficient and negligent

assembly, installation, rigging, and operation of this product.

Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040

323-582-3322 |323-832-9142 fax | www.elationlighting.com |info@elationlighting.com

Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands

+31 45 546 85 66 |+31 45 546 85 96 fax |www.elationlighting.eu |info@elationlighting.eu

Elation Professional Mexico | AV Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

DOCUMENT VERSION

Due to additional product features and/or enhancements,

an updated version of this document may be available

online. Please scan the QR Code with your mobile device or

visit www.elationlighting.com for the latest revision/update of

this manual, before installation and/or programming.

Date

Document

Version

Software

Version ≥

DMX

Channel Modes

Notes

09/17/19

1.0

1.3.1

27 / 44

Initial release.

CONTENTS

General Information

Warranty Returns (USA Only)

Safety Guidelines

Discharge Lamp Warning

Maintenance Guidelines

Fixture Overview

Colors, Gobos, Animation

Gobo Size

Gobo Replacement

Lamp Replacement

Fixture Installation

System Menu

DMX Channel Functions and Values

Error Codes

Specifications

Optional Accessories

GENERAL INFORMATION

INTRODUCTION

Please read and understand the instructions in this manual carefully and thoroughly before

attempting to operate this device. These instructions contain important safety and use

information.

UNPACKING

Every device has been thoroughly tested and has been shipped in perfect operating

condition. Carefully check the shipping carton for damage that may have occurred during

shipping. If the carton is damaged, carefully inspect the device for damage, and be sure all

accessories necessary to install and operate the device have arrived intact. In the event

damage has been found or parts are missing, please contact our customer support team for

further instructions. Please do not return this device to your dealer without first contacting

customer support. Please do not discard the shipping carton in the trash. Please recycle

whenever possible.

BOX CONTENTS

Omega Brackets (x2)

IP65 Power Cable

CUSTOMER SUPPORT

Contact ELATION Service for any product related service and support needs.

Also visit forums.elationlighting.com with questions, comments or suggestions.

ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

323-582-3322 | Fax 323-832-9142 | [email protected]

ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

+31 45 546 85 63 | Fax +31 45 546 85 96 | suppo[email protected]

REPLACEMENT PARTS please visit parts.elationlighting.com

WARRANTY RETURNS (USA ONLY)

To obtain war r a n t y se r v ic e , a Re t u r n Mate r ials Au t h o r iz a tio n ( RM A) nu m b e r m u st fi r st be

obtained from ELATION. It is the Customer’s responsibility to provide product proof of purchase

and serial number by acceptable evidence such as an invoice copy or an approved ELATION

Extended Warranty Certificate (“EWC”) and any relevant maintenance records at the time

warranty service is sought. Failure to provide acceptable evidence of product proof of purchase

or EWC and any relevant maintenance records may be cause for denial of warranty service.

Products returned for warranty service must be sent without any accessories (i.e., power, data,

and safety cables, brackets, clamps, rigging hardware, frost filters, gel frames, barn doors, lens,

hoses, nozzles, rack mounting hardware, etc.), must be boxed using the original and/or suitable

packaging materials (double-box and foam) that provides ample product protection for ground

and/or air freight transit, and must be shipped freight pre-paid and insured to ELATION in Los

Angeles, CA or an ELATION Authorized Service Center. The RMA number must be clearly

written on the outside of the return box, and a brief description of the problem and the RMA

number must be documented and included in the box.

Products returned for warranty service without an RMA number clearly marked on the outside

of the package will be refused and returned to the shipper at the Customer’s expense. Products

returned for warranty service, which are received damaged due to inadequate and/or improper

packaging and/or due to damage caused by shipping carrier, may incur additional repair

charges before warranty service begins and/or may void this warranty. If any product

accessories (included and/or optional) are shipped with the product, ELATION and/or the

ELATION Authorized Service Center shall have no liability what so ever for the loss and/or

damage to any such accessories, nor the safe return thereof. If the requested warranty repairs

or service (including parts replacement) are within the terms of this warranty, ELATION will pay

return ground transportation shipping charges to a single designated point within the United

States.

SAFETY GUIDELINES

This fixture is a sophisticated piece of electronic equipment. To guarantee a smooth

operation, it is important to follow all instructions and guidelines in this manual. Elation

Professional is not responsible for injury and/or damages resulting from the misuse of this

fixture due to the disregard of the information printed in this manual. Only qualified and/or

certified personnel should perform installation of this fixture and only the original rigging

parts (omega brackets) included with this fixture should be used for installation. Any

modifications to the fixture and/or the included mounting hardware will void the original

manufactures warranty and increase the risk of damage and/or personal injury.

PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.

DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID

YOUR MANUFACTURES WARRANTY. DAMAGES RESULTING FROM

MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF

SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID

THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY

WARRANTY CLAIMS AND/OR REPAIRS.

DO NOT PLUG FIXTURE INTO A DIMMER PACK!

NEVER OPEN THIS FIXTURE WHILE IN USE!

UNPLUG POWER BEFORE SERVICING FIXTURE!

NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT!

KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!

RETINA INJURY RISK - MAY INDUCE BLINDNESS!

SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!

INDOOR / DRY LOCATIONS USE ONLY!

DO NOT EXPOSE FIXTURE TO RAIN AND MOISTURE!

MINIMUM DISTANCE TO OBJECTS/SURFACES

MUST BE 49.2 FEET (15 METERS)

MAXIMUM TEMP OF EXTERNAL SURFACE 248°F (120°C)

MINIMUM DISTANCE OF INFLAMMABLE MATERIALS

FROM THE SURFACE 1.6 FEET (0.5 METER)

SAFETY GUIDELINES

RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET UV

RADIATION! FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF

ULTRAVIOLET UV LIGHT FROM THE UV COLOR FILTER. WEAR

PROPER EYE AND SKIN PROTECTION. AVOID PROLONGED

PERIODS OF EXPOSURE TO UV COLOR FILTER. AVOID

WEARING WHITE COLOR CLOTHING AND/OR USING UV PAINTS

ON SKIN. AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT

DISTANCES LESS THAN 11 feet (3.3m). DO NOT OPERATE

FIXTURE WITH DAMAGED/MISSING EXTERNAL COVERS. DO NOT LOOK DIRECTLY INTO

THE UV LIGHT AND/OR VIEW UV LIGHT DIRECTLY WITH OPTICAL INSTRUMENTS THAT

MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT. INDIVIDUALS SUFFERING FROM

A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DIS-ORDERS, OR INDIVIDUALS

USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO

THE ULTRAVIOLET UV LIGHT EMITTED FROM THE UV LED.

DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow

approximately 60 minutes for the fixture to cool down before serving.

DO NOT shake fixture, avoid brute force when installing and/or operating fixture.

DO NOT operate fixture if the power cord is frayed, crimped, damaged and/or if any of the

power cord connectors are damaged and do not insert into the fixture securely with ease.

NEVER force a power cord connector into the fixture. If the power cord or any of its

connectors are damaged, replace it immediately with a new one of similar power rating.

DO NOT block any air ventilation slots.

All fan and air inlets must remain clean and never blocked.

Allow approx. 6” (15cm) between fixture and other devices or a wall for proper cooling.

Always disconnect fixture from main power source before performing any type of service

and/or cleaning procedure. Only handle the power cord by the plug end, never pull out the

plug by tugging the wire portion of the cord.

During the initial operation of this fixture, a light smoke or smell may emit from the interior of

the fixture. This is a normal process and is caused by excess paint in the interior of the casing

burning off from the heat associated with the lamp and will decrease gradually over time.

Consistent operational breaks will ensure fixture will function properly for many years.

ONLY use the original packaging and materials to transport the fixture in for service.

DISCHARGE LAMP WARNING

This fixture is fitted with a DISCHARGE LAMP, which is highly

susceptible to damage if improperly handled. NEVER touch the lamp

with your bare hands, as the oil from your hands will shorten the life of

the lamp. NEVER move the fixture until the lamp has had ample time

to cool. DISCHARGE LAMPS are NOT covered under warranty

conditions. Avoid switching the fixture ON and OFF repeatedly in short

intervals, as this will reduce lamp life and intensity. To achieve the

intensity associated with discharge lamps, these lamps use gas sealed

in a high-pressure environment to emit a brilliant output.

Due to the high pressure involved with the construction of the lamp, it MAY EXPLODE

DURING PROLONGED EXTENSIVE USE. This risk is increased with age; added care is

encouraged when dealing with older lamps. Thus, the lamp must always be replaced at the

end of their recommended duty cycle. Extreme caution should be used when operating this

or any fixture fitted with a gas discharge lamp.

UV RADIATION NOTICE

THIS FIXTURE EMITS INTENSE UV RADIATION, WHICH IS HARMFUL

TO THE EYES AND SKIN. THE INTENSE LUMINANCE OF THE LAMP

CAN CAUSE SEVERE DAMAGE TO THE RETINA. NEVER OPERATE

THIS FIXTURE WITH ANY OF THE PROTECTIVE COVERS REMOVED.

THESE COVERS HAVE BEEN SPECIALLY DESIGNED TO SHIELD

AGAINST UV RADIATION.

LAMP REPLACEMENT

USE ONLY GENUINE ORIGINAL PHILIPS™ LAMPS. OTHER BRAND

LAMPS WILL CAUSE DAMAGE AND WILL VOID FIXTURE WARRANTY!

DISCONNECT THE MAIN POWER SUPPLY BEFORE REPLACING LAMP!

FIXTURE MUST COOL FOR 60 MINUTES BEFORE REPLACING LAMP!

NEVER TOUCH LAMP WITH BARE HANDS, ALWAYS WEAR GLOVES!

OIL FROM HANDS WILL SHORTEN LIFE OF LAMP!

MAKE SURE ALL COVERS/PANELS ARE REPLACED/SECURED BEFORE

OPERATING FIXTURE TO PREVENT ANY RISK AND/OR DAMAGE TO EYE

RETINA FROM UV RADIATION EXPOSIURE!

MAINTENANCE GUIDELINES

DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!

CLEANING

Frequent cleaning is recommended to insure proper function, optimized light output, and

an extended life. The frequency of cleaning depends on the environment in which the

fixture operates: damp, smoky or particularly dirty environments can cause greater

accumulation of dirt on the fixture’s optics. Clean the external lens surface at least every

20 days with a soft cloth to avoid dirt/debris accumulation.

NEVER use alcohol, solvents, or ammonia-based cleaners.

MAINTENANCE

Regular inspections are recommended to insure proper function and extended life.

There are no user serviceable parts inside this fixture, please refer all other service issues

to an authorized Elation service technician. Should you need any spare parts, please order

genuine parts from your local Elation dealer.

Please refer to the following points during routine inspections:

A detailed electric check by an approved electrical engineer every three months, to make

sure the circuit contacts are in good condition and prevent overheating.

Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out

during normal operation resulting in damage or injury as larger parts could fall.

Check for any deformations on the housing, color lenses, rigging hardware and rigging

points (ceiling, suspension, trussing). Deformations in the housing could allow for dust to

enter into the fixture. Damaged rigging points or unsecured rigging could cause the fixture

to fall and seriously injure a person(s).

Electric power supply cables must not show any damage, material fatigue or sediments.

NEVER remove the ground prong from the power cable.

FIXTURE OVERVIEW

ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS

DEVICE IN A SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE

WILL NOT DROP IF THE CLAMP FAILS.

SAFETY CABLE

ATTACHMENT POINT

1. Lens

2. TILT Lock

3. LCD Control Menu Display

4. MODE/ESC Button

5. LEFT Button

6. ENTER Button

7. DOWN Button

8. RIGHT Button

9. UP Button

10. PAN Lock

11. Handel (s)

12. RJ45 Ethernet IN

13. RJ45 Ethernet OUT

14. 5pin DMX OUT

15. 5pin DMX IN

16. Fuse

17. Service Port

18. PowerCON TRUE1 IN

Table des matières

Autres manuels Elation Matériel de DJ

Elation

Elation WW PROFILE HP Manuel utilisateur

Elation

Elation EPV762 MH Manuel utilisateur

Elation

Elation CUEPIX 16IP DTW Manuel utilisateur

Elation

Elation SNIPER PRO Manuel utilisateur

Elation

Elation HAZE 400 Manuel utilisateur

Elation

Elation Artiste Monet Manuel utilisateur

Elation

Elation RDMX6S Manuel utilisateur

Elation

Elation CUEPIX 16IP DTW Manuel utilisateur

Elation

Elation SEVEN BATTEN 72 Manuel utilisateur

Elation

Elation DTW PAR 300 Manuel utilisateur

Elation

Elation Lumina Matrix Manuel utilisateur

Elation

Elation ZCL BAR Z300 IP Manuel utilisateur

Elation

Elation SATURA PROFILE Manuel utilisateur

Elation

Elation SEVEN PAR 7IP Manuel utilisateur

Elation

Elation DTW BLINDER 700 IP Manuel utilisateur

Elation

Elation SIXPAR 300 Manuel utilisateur

Elation

Elation PLATINUM SPOT LED PRO II Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Elation

Elation FUZ567 Manuel utilisateur

Elation

Elation TVL SOFTLIGHT DW Manuel utilisateur

Elation

Elation DW PENDANT Manuel utilisateur

Elation

Elation SIX PAR Z19 IP Manuel utilisateur

Elation

Elation PIXEL BAR 30IP Manuel utilisateur

Elation

Elation TVL551 Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur

KAM

KAM DMX Laser80 FScan Manuel utilisateur