ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus ·
6
EKSEL 632 USER MANUAL
voltage. By pressing OK we will change between inputs, with ◀▶
we will enable/disable voltage at that input: 1:+ 2:- 3:- 4:-
+ = enabled / - = disabled.
<AUTO SCANNING>
INPUTS: 1:- 2:- 3:- 4:-
LTE filter: 790MHz / 690MHz /
off
Searching [*** ]
Result: CH UHF:xx
Automatic UHF channels search.
Press OK to enter. Select in which inputs we do have signal. Pressing
OK we move between inputs and with ◀▶ we will enable/disable
such input: 1:+ 2:- 3:- 4:-
+ = enabled / - =disabled.
Using OK we will jump to Lte filter selection; with ◀▶ we will select:
790MHz, 694MHz, off. After confirming with OK scan will start. Once
th search is finished it will be shown a message showing the number
of channels found.
<V-UHF1>
UHF1 L= 75dBuV
24=>24 L=108dBuV
UHF Add channel
Manual configuration of V-UHF1 input. (****).
Whether we want to add manually a new channel after AutoScan or
we want to configure such input totally manually from beginning, with
◀▶ we need to move until Add channel and press OK. Configurable
parameters, second line, will be shown flashing, with ◀▶ we will
change their value, with OK we accept and move to next value to
configure. First value is input channel, second value is output channel,
third value is output level (*). If selected output channel is already in
use an Error message will be shown. Input level will be shown in first
line; if it I too low it will shown as L=Low lev.
If one channel needs to be deleted, stay in selected channel and keep
pressing OK until Channel deleted! Message appears.
<V-UHF2> Manual configuration of V-UHF2 input. (****).
Idem <UHF1>.
<V-UHF3> Manual configuration of V-UHF3 input. (****).
Idem <UHF1>
<V-UHF4> Manual configuration of V-UHF4 input. (****).
Idem <UHF1>
This option will not appear if we have selected DAB in <V-UHF4 MODE>
menu.
<OUT>
Level: xxxdBuV
Slope: yydB
Output level (*) and Slope configuration for UHF channels.
Press OK for entering into menu. Select parameter to modify by ◀▶,
Level (*) or Slope. With OK we select option and with ◀▶ we modify
its value.
<FM>
Preamplific.: on/off
Atenuation: xdB
FM input Configuration.
