Eizo RadiForce G11 Manuel utilisateur

User’s Manual

Monochrome LCD Monitor

English

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them

carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and

can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate injury

and/or property or product damage.

Indicates a prohibited action.

Indicates to ground for safety.

manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any

means, electronic, mechanical, or otherwise, without the prior written permission of Eizo Nanao

Corporation.

EIZO NANAO CORPORATION is under no obligation to hold any submitted material or

information confidential unless prior arrangements are made pursuant to EIZO NANAO

CORPORATION’s receipt of written information. Although every effort has been made to

ensure that this manual provides up-to-date information, please note that EIZO monitor

specifications are subject to change without notice.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards

Association.

Pivot and Portrait Displays are registered trademarks of Portrait Displays, Inc.

VGA is a registered trademark of International Business Machines Corporation.

Windows is a registered trademark of Microsoft Corporation.

RadiForce and PowerManager are trademarks of EIZO NANAO CORPORATION.

ScreenManager and EIZO are registered trademarks of EIZO NANAO CORPORATION.

English

TABLE OF CONTENTS 3

TABLE OF CONTENTS

PRECAUTIONS.................................................................................... 4

1. INTRODUCTION ..................................................................................... 9

1-1. Features....................................................................................................... 9

1-2. Package Contents ........................................................................................ 9

1-3. Controls & Connectors ............................................................................. 10

2. CABLE CONNECTION ......................................................................... 12

2-1. Before connecting ...................................................................................... 12

2-2. Connecting the signal cable ....................................................................... 13

3. ScreenManager .................................................................................... 16

3-1. How to use the ScreenManager ................................................................. 16

3-2. ScreenManager Adjustments and Settings.................................................. 17

3-3. Useful Functions........................................................................................ 18

4. ADJUSTMENT ...................................................................................... 19

4-1. Screen Adjustment..................................................................................... 19

4-2. Displaying low resolutions......................................................................... 23

4-3. Power-save Setup....................................................................................... 25

5. CALIBRATION ...................................................................................... 26

6. MAKING USE OF USB (Universal Serial Bus) ...................................28

7. ATTACHING AN ARM STAND .............................................................. 30

8. TROUBLESHOOTING........................................................................... 32

9. CLEANING ............................................................................................ 36

10. SPECIFICATIONS............................................................................... 37

11. GLOSSARY ......................................................................................... 41

English

4PRECAUTIONS

PRECAUTIONS

IMPORTANT!

• This product has been adjusted specifically for use in the region to which it was

originally shipped. If operated outside the region to which it was originally shipped,

the product may not perform as stated in the specifications.

• To ensure personal safety and proper maintenance, please read this section and the

caution statements on the unit (refer to the figure below).

[Location of the Caution Statements]

[Symbols on the unit]

Symbol Location This symbol indicates

Top Main power switch.

Press to turn the monitor’s main power off.

Top Main power switch.

Press to turn the monitor’s main power on.

Front

Control panel

Power button

Press to turn the monitor’s power on or off.

Rear

Name Plate

Alternating current

Rear

Name Plate

Alerting electrical hazard

Rear

Name Plate

Caution

Refer to SAFETY SYMBOLS section in this

manual.

English

PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like something is burning, or

makes strange noises, disconnect all power connections immediately

and contact your dealer for advice.

Attempting to use a malfunctioning unit may result in fire, electric shock, or

equipment damage.

Do not open the cabinet or modify the unit.

Opening the cabinet or modifying the unit may result in fire, electric shock, or

burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing covers

may result in fire, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet

or spillage into the cabinet may result in fire, electric shock, or equipment

damage.

If an object or liquid falls/spills into the cabinet, unplug the unit immediately.

Have the unit checked by a qualified service engineer before using it again.

Place the unit at the strong and stable place.

A unit placed on an inadequate surface may fall and result in injury or

equipment damage.

If the unit falls, disconnect the power immediately and ask your dealer for

advice. Do not continue using a damaged unit. Using a damaged unit may

result in fire or electric shock.

Set the unit in an appropriate location.

Not doing so may result in fire, electric shock, or equipment damage.

* Do not place outdoors.

* Do not place in the transportation system (ship, aircraft, trains, automobiles,

etc.)

* Do not place in a dusty or humid environment.

* Do not place in a location where the steam comes directly on the screen.

* Do not place near heat generating devices or a humidifier.

* Do not place in an inflammable gas environment.

To avoid danger of suffocation, keep the plastic packing bags away

from babies and children.

English

6PRECAUTIONS

WARNING

Use the enclosed power cord and connect to the standard power outlet

of your country.

Be sure to remain within the rated voltage of the power cord.

Not doing so may result in fire or electric shock.

To disconnect the power cord, grasp the plug firmly and pull.

Tugging on the cord may damage and result in fire or electric shock.

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock.

Use the correct voltage.

* The unit is designed for use with a specific voltage only. Connection to

another voltage than specified in this User’s Manual may cause fire, electric

shock, or equipment damage.

* Do not overload your power circuit, as this may result in fire or electric

shock.

Handle the power cord with care.

* Do not place the cord underneath the unit or other heavy objects.

* Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord

may result in fire or electric shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

When attaching an arm stand, please refer to the user’s manual of the

arm stand and install the unit securely with the enclosed screws.

Not doing so may cause the unit to become unattached, which may result in

injury or equipment damage. When the unit is dropped, please ask your dealer

for advice. Do not continue using a damaged unit. Using a damaged unit may

result in fire or electric shock. When reattaching the tilt stand, please use the

same screws and tighten them securely.

English

PRECAUTIONS

WARNING

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal that may leak from the panel is poisonous if it enters the

eyes or mouth.

If any part of the skin or body comes in direct contact with the panel, please

wash thoroughly. If some physical symptoms result, please consult your

doctor.

Follow local regulation or laws for safe disposal.

The backlight of the LCD panel contains mercury.

CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit

with the cord attached is dangerous. It may result in injury.

When handling the unit, grip the bottom of the unit firmly with both

hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

* Do not place any objects on the ventilation slots.

* Do not install the unit in a closed space.

* Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in fire,

electric shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a

problem.

Periodically clean the area around the plug.

Dust, water, or oil on the plug may result in fire.

English

8PRECAUTIONS

CAUTION

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric

shock.

If you plan to leave the unit unused for an extended period, disconnect

the power cord from the wall socket after turning off the power switch

for the safety and the power conservation.

LCD Panel

In order to suppress the luminosity change by long-term use and to maintain

the stable luminosity, please use the monitor with the brightness below 400

cd/m2(equal to default setting of Brightness approximately 60 %).

The screen may have defective pixels. These pixels may appear as slightly light

or dark area on the screen. This is due to the characteristics of the panel itself,

and not the product.

The backlight of the LCD panel has a fixed life span. When the screen becomes

dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in

damage to the screen. There will be prints left on the screen if the pressed

image is dark or black. If pressure is repeatedly applied to the screen, it may

deteriorate or damage your LCD panel. Leave the screen white to decrease the

prints.

Do not scratch or press on the panel with any sharp objects, such as a pencil or

pen as this may result in damage to the panel. Do not attempt to brush with

tissues as this may scratch the LCD panel.

English

1. INTRODUCTION 9

1. INTRODUCTION

Thank you very much for choosing an EIZO Monochrome Monitor.

1-1. Features

• DVI (p. 41) Digital input (TMDS (p. 42)) compliant

• Resolution: 1 M pixels (1280 x 1024)

Horizontal scanning frequency: 27 - 82 kHz (Digital input: 27 - 64 kHz)

Vertical scanning frequency: 50 - 85 Hz (1280 x 1024 ~ 75 Hz)

(Digital input: 60 Hz (VGA text: 70 Hz))

• RGB Color video signal compatibility

• Auto Adjustment compliant

• USB (Universal Serial Bus) hub supported (p.28)

• The height adjustable stand incorporated

• Ultra slim bezel incorporated

• The Portrait/Landscape display capability

1-2. Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or

damaged.

•LCD Monitor

•Power Cord

•Signal Cable (FD-C16)

•Signal Cable (FD-C04)

•Pivot Software*1

•User’s Manual

•LIMITED WARRANTY

Pivot Software serves as a trial version. Please use after confirming an operation

compatibility with your computer by the homepage of Portrait Displays, Inc

(http://www.portrait.com).

NOTE

• Please retain the packing materials for future transference.

English

10 1. INTRODUCTION

1-3. Controls & Connectors

Front

ENTERAUTO

SIGNAL

1 - 2

(4)

(2)

(5) (6)

(3) (7) (8)

(1)

(1) ScreenManager

(2) Main Power Switch

(3) SIGNAL 1-2 Signal selection button (Color/Monochrome)*1

(4) AUTO Auto Adjustment Button

(5) ENTER Enter Button

(6) Control Buttons (Left, Down, Up, Right)*2

(7) Power Button

(8) Power Indicator*3

Green Operation

Orange Power saving

Flashing orange (2 times

for each)

Power save mode Digital only

Flashing orange slowly Power is off (Main power is on)

Off Power off

*1 Select color or monochrome for the graphics board of use (p.14).

*2 These buttons are changed to Down, Right, Left, Up in case of selecting “Portrait”

for <Orientation> of ScreenManager <Others> (p.17).

*3 Green lighting, when the screen is displayed (Operation mode), is made to non-light,

see page 17.

Regarding the power indicator for the off timer, see page 18.

Control Panel

Table des matières

Autres manuels Eizo Moniteur

Eizo

Eizo DuraVision FDF2405W Manuel utilisateur

Eizo

Eizo FlexScan L778 Manuel utilisateur

Eizo

Eizo EIZO FlexScan F57 Manuel utilisateur

Eizo

Eizo FlexScan L371 Manuel utilisateur

Eizo

Eizo DuraVision FDF2121WT-AGY Guide de l'utilisateur

Eizo

Eizo FLEXSCAN L771 - Manuel utilisateur

Eizo

Eizo FlexScan M1900 Manuel utilisateur

Eizo

Eizo DuraVision FDS1703 Manuel utilisateur

Eizo

Eizo FlexScan S1504 Manuel utilisateur

Eizo

Eizo ColorEdge CG246 Manuel utilisateur

Eizo

Eizo FlexScan S1503-A Manuel utilisateur

Eizo

Eizo RadiForce GS520 Guide de démarrage rapide

Eizo

Eizo ColorEdge CG222W Manuel utilisateur

Eizo

Eizo FlexScan EV2740X Manuel utilisateur

Eizo

Eizo ColorEdge PROMINENCE CG3146 Manuel utilisateur

Eizo

Eizo CuratOR EX3241 Manuel utilisateur

Eizo

Eizo FLEXSCAN S1701-X - Manuel utilisateur

Eizo

Eizo DuraVision FDX1204T Guide de l'utilisateur

Eizo

Eizo FlexScan S2031W Manuel utilisateur

Eizo

Eizo FlexScan S2401W Guide de l'utilisateur

Eizo

Eizo FlexScan S1503 Manuel utilisateur

Eizo

Eizo ColorEdge CG2420 Manuel utilisateur

Eizo

Eizo FLEXSCAN S2232W - Manuel utilisateur

Eizo

Eizo FlexScan L797 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation