Eizo FlexScan L371 Manuel utilisateur

ENGLISH

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please

read them carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious

injury and can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate

injury and/or property or product damage.

Indicates a prohibited action.

Indicates to ground for safety.

this manual may be reproduced, stored in a retrieval system, or transmitted, in any form

or by any means, electronic, mechanical, or otherwise, without the prior written

permission of Eizo Nanao Corporation.

Eizo Nanao Corporation is under no obligation to hold any submitted material or

information confidential unless prior arrangements are made pursuant to Eizo Nanao

Corporation's receipt of said information. Although every effort has been made to ensure

that this manual provides up-to-date information, please note that EIZO monitor

specifications are subject to change without notice.

ENERGY STAR is a U.S. registered mark.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

VGA is a registered trademark of International Business Machines Corporation.

DPMS is a trademark and VESA is a registered trademark of Video Electronics

Standards Association.

Windows is a registered trademark of Microsoft Corporation.

ScreenManager, PowerManager and

i·Sound are trademarks of

Eizo Nanao Corporation.

FlexScan and EIZO are registered trademarks of Eizo Nanao Corporation.

As an ENERGY STAR® Partner, Eizo Nanao Corporation has determined that

this product meets the ENERGY STAR guidelines for energy efficiency.

TABLE OF CONTENTS 3

ENGLISH

TABLE OF CONTENTS

PRECAUTIONS .............................................................................. 4

1. INTRODUCTION .......................................................................... 10

1-1. Features ..................................................................................................... 10

1-2. Package Contents ...................................................................................... 11

1-3. Controls & Connectors ................................................................................ 12

2. CABLE CONNECTION................................................................ 14

2-1. Before connecting ....................................................................................... 14

2-2. Connecting up............................................................................................. 15

2-3. Digital input connection............................................................................... 17

3. ScreenManager ........................................................................... 18

3-1. How to use the ScreenManager .................................................................. 18

3-2. ScreenManager Adjustments and Settings ............................................... 19

3-3. Useful Functions......................................................................................... 20

4. ADJUSTMENT ............................................................................ 21

4-1. Screen Adjustment ..................................................................................... 21

4-2. Displaying the low resolutions ..................................................................... 25

4-3. Color adjustment......................................................................................... 27

4-4. Power-save Setup ....................................................................................... 28

5. ADJUSTMENT FOR DIGITAL ..................................................... 29

5-1. Screen Adjustment ..................................................................................... 29

5-2. Displaying the low resolutions ..................................................................... 30

5-3. Power-save Setup ....................................................................................... 31

6. MAKING USE OF USB (Universal Serial Bus) .......................... 32

7. CONNECTING TWO PCs to THE MONITOR ............................... 34

8. ATTACHING AN ARM STAND .................................................... 36

9. TROUBLE SHOOTING ................................................................ 38

10. CLEANING................................................................................... 42

11. SPECIFICATIONS ....................................................................... 43

12. GLOSSARY.................................................................................. 46

13. INDEX .......................................................................................... 48

4PRECAUTIONS

PRECAUTIONS

WARNING

´ If the monitor begins to emit smoke, smells like something is

burning, or makes strange noises, disconnect all power connections

immediately and contact your dealer for advice.

Attempting to use a malfunctioning monitor can be dangerous.

´ Do not dismantle the cabinet or modify the monitor.

Dismantling the cabinet or modifying the monitor may result in electric

shock or burn.

´ Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards.

IMPORTANT!

´This product has been adjusted specifically for use in the region to which it was

originally shipped. If operated outside the region to which it was originally shipped,

the product may not perform as stated in the specifications.

´To ensure personal safety and proper maintenance. Please read this section and the

caution statements on the monitor (refer to the figure below).

[Location of the Caution Statements]

(L371)

(L671)

PRECAUTIONS 5

ENGLISH

WARNING

´ Keep small objects away from the monitor.

Small objects may accidentally fall through the ventilation slots into the

cabinet, leading to fire, shock, or equipment damage.

´ Keep liquids away from the monitor.

Spillage into the cabinet may result in fire, electric shock, or equipment

damage. If an object or liquid falls/spills into the cabinet, unplug the

monitor immediately. Have the monitor checked by a qualified service

engineer before using it again.

´ Place the monitor on a strong, stable surface.

A monitor placed on an inadequate surface may fall, resulting in injury or

equipment damage. If the monitor falls, disconnect the power immediately

and have the monitor checked by a qualified service engineer before using it

again. Using a monitor after it has been dropped may result in fire or

electric shock.

´ Set the monitor in an appropriate location.

* Do not install in a dusty or humid environment.

* Do not place in a location where steam can have direct contact with

the screen.

* Do not place near heat generating devices or a humidifier.

´ Keep the plastic packing bags away from children and infants.

Plastic bags can be dangerous. To avoid danger of suffocation, keep the

bag away from babies and children.

• Keep power terminal covers for the optional i·Sound™ sound unit

away from children and infants.

Children and infants may accidentally swallow the covers and choke. If

swallowed, consult a doctor immediately.

6PRECAUTIONS

WARNING

• Use the enclosed power cord. If using the power cord other than the

enclosed one, follow these guidelines.

[USA and Canada]

Use a UL LISTED/CSA LABELED or CERTIFIED power cord set meeting

the following specifications.

* Rating: min. 125 V, 10 A *Length: max. 2.0 m

* Plug type: NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A

* Type: SVT

[Europe]

Use a proper European standard approved power cord meeting the

following specifications.

* Rating: min. 250 V, 10 A *Length: max. 2.0 m

* Type: H05VV-F 3G 1 mm2

Use a plug type approved by the country where you reside. Failure to do so

may cause fire or electric shock.

´ To disconnect the power cord, grasp the plug firmly and pull.

Never tug on the cord, doing so may cause damage and couldresult in

fire or electric shock.

´ The equipment must be connected to a grounded main outlet.

´ Use the correct voltage.

* The monitor is designed for use with a specific voltage only. Connection

to a different voltage may cause fire, electric shock, or other damage.

* Do not overload your power circuit, as this may result in fire or electric

shock.

* For proper connections of the power cord, be certain to plug the

power cord to the provided monitor connector and directly to a wall

outlet. Not doing so may result in fire or electric shock.

´ Handle the power cord with care.

* Do not place the cord underneath the monitor or other heavy objects.

* Do not pull on the cord.

* Do not attempt to repair a damaged cord.

If the power cord becomes damaged, stop using it. Use of a damaged

cord may result in fire or electric shock.

´ Never touch the plug and power cord if it begins to thunder.

If it begins to thunder, do not touch the plug, power cord or cable.

Touching them may result in electric shock.

PRECAUTIONS 7

ENGLISH

WARNING

´ Install the monitor securely when attaching to an arm stand.

When attaching an arm stand, please refer to the user’s manual of the arm

stand and install the monitor securely with the enclosed screws. Not doing

so may cause the monitor to come unattached, which may result in injury

or equipment damage. When the monitor is dropped, please ask your

dealer for advice. Do not continue using a damaged monitor. Using a

damaged monitor may result in fire or electric shock.

When reattaching the tilt stand, please use the same screws and tighten

them securely.

´Do not touch a damaged LCD panel directly with bare hands.

Use protective gloves whenever handling a damaged panel. The liquid

crystal which leaks from the panel is poisonous if it enters the eyes or

mouth. If any part of the skin or body comes in direct contact with the

panel, please wash thoroughly. If some physical symptoms result, please

consult your doctor.

´ Take care when disposing of the monitor.

The backlight of the LCD panel contains mercury. Follow local

regulation or laws for safe disposal.

CAUTION

• Handle with care when carrying the monitor.

* Disconnect the power cord, signal cables and remove the optional

i·Sound™sound unit (if applicable). Moving the monitor with the cord

attached or lifting it by the i·Sound™sound unit is dangerous. It may

result in injury or equipment damage.

* When handling the monitor, grip the bottom of the monitor firmly with

both hands ensuring the panel faces outward before lifting.

* Handle with care to avoid scratching or damaging the panel. If the

monitor becomes damaged, disconnect the power immediately and have

the monitor checked by a qualified service engineer before using it again.

Using a monitor after it has been dropped may result in fire or electric

shock.

8PRECAUTIONS

CAUTION

´ Do not block the ventilation slots on the cabinet.

* Do not place books or any other papers on the ventilation slots.

* Do not install the monitor in a closed space.

* Do not use the monitor lengthwise or upside down.

Using the monitor in this way blocks the ventilation slots and prevents

proper airflow, leading to fire or other damage.

• Do not use the LCD monitor outdoors or inside a car.

This LCD monitor has been made specifically for indoor use as a desktop

monitor. Using it anywhere else may result in fire, electrical shock, or

other damage.

• When adjusting the viewing angle of the monitor, do not do so by

handling i·Sound™ sound unit (if applicable).

Adjusting the monitor in this way may break the monitor or cause bodily

injury.

´ At the end of the day or if you plan to leave the monitor unused for an

extended period after turning off the power switch, disconnect the

power cord from the wall socket so that no power connections are

made.

´ Do not touch the plug with wet hands.

Touching the plug with wet hands is dangerous and can cause electrical

shock.

´ Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a

problem.

´ Unplug the monitor before cleaning it.

Cleaning the monitor while it is plugged into a power outlet may result in

electric shock.

´ Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl

alcohol), abrasive cleaners, or other strong solvents, as these may

cause damage to the cabinet or LCD panel.

´ Periodically clean the area around the plug.

Buildup of dust, water, or oil on the plug may result in fire.

PRECAUTIONS 9

ENGLISH

Suggestions for Maximizing Comfort

´ To lessen the chance of possible injury and to increase your

comfort and productivity while you operate the monitor, we suggest

the following:

* Avoid less favorable body positioning. Sit back on the chair with

your back straight.

* Adjust the height of the chair so that the both soles touch the floor.

* Adjust the height of your chair, monitor, or keyboard so that you

can keep your wrists straight while typing.

* Set the terminal slightly below eye level.

´ Adjust brightness of the screen depending on the brightness of

your environment. Too dark or too bright of a screen can cause eye

strain.

´ Be sure to take adequate rests. A 10-minute rest period each hour

is suggested.

• Do not remove the covers to the power terminal for the optional

i·Sound™ sound unit for any reason except to attach the monitor.

LCD Panel

´ The screen may have defective pixels. These pixels may appear as

slightly light or dark area on the screen. This is due to the

characteristics of the panel itself, and not the product.

´ The backlight of the LCD panel has a fixed life span.

When the screen becomes dark or begins to flicker, please contact your

dealer.

´ Do not press on the panel or edge of the frame strongly, as this will

result in damage to the screen. There will be prints left on the

screen if the pressed image is dark or black. If pressure is

repeatedly applied to the screen, it may deteriorate or damage your

LCD panel. Leave the screen white to decrease the prints.

´ Do not scratch or press on the panel with any sharp objects, such

as a pencil or pen as this may result in damage to the panel. Do not

attempt to brush with tissues as this may scratch the LCD panel.

10 1. INTRODUCTION

1. INTRODUCTION

Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

•DVI p.46) Digital input (TMDS p.47) compliant.

•Dual inputs compliant (D-Sub mini 15 pin and DVI-I).

•L371: 1024 x 768 resolution

Horizontal scanning frequency of 27-61 kHz

Vertical scanning frequency of 50-85 Hz

Vertical (Digital) of 60 Hz (VGA text: 70 Hz)

L671: 1280x 1024 resolution

Horizontal scanning frequency of 27-82 kHz

Vertical scanning frequency of 50-85 Hz

Vertical (Digital) of 60 Hz (VGA text: 70 Hz)

•Auto Adjustment compliant and original “Picture Adjustment Program”software

included.

•Full screen mode and enlarged mode for lower resolutions incorporated.

•Smoothing function incorporated for the adjustment of an enlarged image.

•USB (Universal Serial Bus) hub supported.

Autres manuels pour FlexScan L371

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Eizo Moniteur

Eizo

Eizo FLEXSCAN F931 - Manuel utilisateur

Eizo

Eizo foris FS2735 Manuel utilisateur

Eizo

Eizo COLOREDGE CG303W Manuel utilisateur

Eizo

Eizo FLEXSCAN L887 Manuel utilisateur

Eizo

Eizo DURAVISION FDX1501 Manuel utilisateur

Eizo

Eizo FlexScan L 788-i Manuel utilisateur

Eizo

Eizo FLEXSCAN T1721 Manuel utilisateur

Eizo

Eizo FlexScan L685EX Manuel utilisateur

Eizo

Eizo FlexScan L 795 L795 L795 Guide de démarrage rapide

Eizo

Eizo FlexScan EV3237-GY Manuel utilisateur

Eizo

Eizo flexscan EV2780 Manuel utilisateur

Eizo

Eizo RadiForce MX191 Manuel utilisateur

Eizo

Eizo FLEXSCAN MX240W Manuel utilisateur

Eizo

Eizo RadiForce MX243W Manuel utilisateur

Eizo

Eizo RadiForce EX210 Manuel utilisateur

Eizo

Eizo coloredge prominence CG3145 Manuel utilisateur

Eizo

Eizo ColorEdge CG19 Manuel utilisateur

Eizo

Eizo DURAVISION FDX1001T Manuel utilisateur

Eizo

Eizo EIZO RadiForce RS110 Manuel utilisateur

Eizo

Eizo FLEXSCAN L771 - Manuel utilisateur

Eizo

Eizo EIZO FlexScan P1700 Manuel utilisateur

Eizo

Eizo FlexScan EV2023W Manuel utilisateur

Eizo

Eizo FlexScan EV2023W Manuel utilisateur

Eizo

Eizo FlexScan EV2480-BK Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation