Eizo CuratOR EX2621 Manuel utilisateur

Important

Please read this “Installation Manual”, and “Instructions for Use”

(separate volume) carefully to familiarize yourself with safe and

effective usage.

Refer to the “Instructions for Use” for information on the installation /

connection of the monitor.

Color LCD Monitor

Installation Manual

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

CONTENTS

CONTENTS............................................................. 3

Chapter 1 Basic Adjustment / Setting.............. 4

1-1. Loading the Monitor Settings...................... 4

1-2. Switching Input Signals ............................... 5

1-3. Using Function Buttons ............................... 6

Chapter 2 Advanced Adjustment / Setting ...... 7

2-1. Operation via the Main Menu....................... 7

2-2. Individual Functions of Main Menu............. 8

●Input Cong..................................................... 8

●Video Cong...................................................10

●System Cong................................................12

●Function..........................................................14

●Window Cong...............................................16

●Remote...........................................................18

●Control........................................................... 20

Chapter 3 Troubleshooting.............................. 21

3-1. No Picture Displayed ...................................21

3-2. Imaging Problems....................................... 22

3-3. Other Problems........................................... 22

Chapter 4 Reference ........................................ 23

4-1. Main Default Settings ................................. 23

4-2. PinSpecications....................................... 24

Appendix.............................................................. 25

Trademark ............................................................... 25

License .................................................................... 25

LIMITED WARRANTY............................................. 26

Recycling Information ........................................... 27

4Chapter 1 Basic Adjustment / Setting

Chapter 1 Basic Adjustment / Setting

This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the front

of the monitor.

1-1. Loading the Monitor Settings

It is possible to switch to PRESET, FACTORY, or the USER settings that have been set in advance.

PRESET Basic settings are made in advance at the factory. The settings of PRESET cannot be

changed.

FACTORY Returns to settings when shipped from the factory.

USER Various settings including menus can be made for personal use. For details, see “Preset”

(page 12).

1. Press (PRESET).

The preset menu is displayed.

Press to select the PRESET number, FACTORY, or USER number to

load, and then press (ENTER).

The pre-made settings are loaded and the settings are changed. The selectable settings are as

follows.

• PRESET1 to PRESET5

• FACTORY

• USER1 to USER10

Note

• The “PRESET” menu will disappear after ve seconds have elapsed if no operation is performed.

• is displayed for the USER number that has already been registered.

• When selecting a USER number that has not yet been registered, “No Data” is displayed.

• For information about the main default settings, see “4-1. Main Default Settings” (page 23).

Chapter 1 Basic Adjustment / Setting

1-2. Switching Input Signals

Select the signal input to the monitor and display it on the screen.

1. Press (INPUT).

The “Input Select” menu appears.

Press to select an input signal.

This switches to the selected input signal.

Press (INPUT).

The menu screen exits.

Note

• If you press (INPUT) while the “Input Select” menu is displayed in multi screen mode, the “Input Select” menu

of the subscreen is displayed.

• When RGB / YPBPR is selected, if the color is abnormal, set it correctly with “Input Cong” (page 8) on the

main menu.

• The “Input Select” menu will disappear after ve seconds have elapsed if no operation is performed.

6Chapter 1 Basic Adjustment / Setting

1-3. Using Function Buttons

Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ), F4 ( ) and F5

( )). For information on how to set a function to each button, see “Function” (page 14).

1. Press F1 ( ), F2 ( ), F3 ( ), F4 ( ) or F5 ( ).

The function menu is displayed.

Press the button with the target function set while the function menu is

displayed.

Note

• In multi screen mode, press (INPUT) to select a screen to perform the desired function.

• When the setting of “Function Display” (page 15) is “Off”, the “INVALID FUNCTION” message is displayed if

you press a function button that cannot operate.

• When the setting of “Function Display” (page 15) is “Off”, the “UNDEFINED” message is displayed if you press

a function key assigned to “Undef”.

Chapter 2 Advanced Adjustment / Setting

This chapter describes advanced monitor adjustment and setting procedures using the main menu.

2-1. Operation via the Main Menu

1. Menu display

1. Press (MENU).

The main menu is displayed.

2. Press to select the desired item, and then press .

Adjusting / setting

1. Press to select the desired item.

2. Press to set.

If “Next Menu” is displayed for items, press , and a next menu is displayed.

Exiting

1. If you repeatedly press (MENU), the menu screen exits.

8Chapter 2 Advanced Adjustment / Setting

2-2. Individual Functions of Main Menu

●InputCong

Setting for each input terminal.

Function Setting range Description

SDI Main Stream 1

Stream 2

Sets the picture on Main screen for dual-stream SDI

signal. This is also applied to the single screen mode.

SDI Sub Stream 1

Stream 2

Sets the picture on subscreen 1 for dual-stream SDI

signal.

RGB/YPBPRYPBPR

RGB-VIDEO

RGB-PC

Sets to match the connected signal at the Y/G, PB/B, PR/R

input terminal.

• “YPBPR”

Set to Y, PB/CB, or PR/CR signal.

• “RGB-VIDEO”

Set to RGB signals. Signal decision gives priority to

VIDEO system.

• “RGB-PC”

Set to RGB signals. Signal decision gives priority to

PC system.

HD15 RGB-VIDEO

RGB-PC

Sets to match signal connected to the HD15 input terminal.

• “RGB-VIDEO”

Signal decision gives priority to VIDEO system.

• “RGB-PC”

Signal decision gives priority to PC system.

Sync. Select (RGB) Auto

Sync on Green

VBS

Sets the synchronization signal input method for the RGB

input terminals.

• “Auto”

Automatically switches between SYNC input and

SYNC on G. When synchronized with SYNC input and

SYNC on G, SYNC input is given priority.

• “Sync on Green”

When synchronized with SYNC input and SYNC on G,

select this to synchronize with SYNC on G.

• “VBS”

Select this when connecting by synchronizing the

composite sync (VBS) signal with the SYNC input

terminal. E.g., when a non-synchronous R / G / B

image signal and a VBS signal output device are

connected to the monitor, connect the VBS signal to

the SYNC input terminal, and select VBS.

Chapter 2 Advanced Adjustment / Setting

Function Setting range Description

Sync. Select (HD15) Auto

Sync on Green

Sets the synchronization signal input method for the HD15

input terminal.

• “Auto”

Automatically switches between HD/VD input and

SYNC on G. When HD/VD input and SYNC on G are

synchronous, HD/VD input is given priority.

• “Sync on Green”

When HD/VD input and SYNC on G are synchronous,

select this to synchronize with SYNC on G

Analog

Adjustment

Auto Setup - Automatically adjusts “H Position”, “V Position”, and “Dot

Clock” when the PC signal is input.

H Position 0 to 300 To move screen left and right.

V Position 0 to 100 To move screen up and down.

Dot Clock 0 to 100 When a striped pattern is displayed, adjust so that noise

will decrease when the synchronous striped pattern (noise)

is produced.

Clock Phase 0 to 31 When inputting RGB signals and PC signals, adjust

for ease of viewing if bleeding or blurring of the screen

contour occurs.

Signal Format 4:3

Wide

Sets signal type for unidentiable signals.

10 Chapter 2 Advanced Adjustment / Setting

●VideoCong

Adjustments / settings for image display.

Function Setting

range Description

Color 0 to 100 Adjusts color depth of the image.

Tint 0 to 100 Adjusts skin tones.

Brightness 0 to 100 Adjusts image darkness (black).

Picture 0 to 100 Adjusts image contrast.

Edge Emphasis Sharpness

S.R.S.C.

Off

Displays a clearer image.

• “Sharpness”

Adjusts image contour emphasis. Changing the

“Emphasis Level” value will adjust the strength of

emphasis.

• “S.R.S.C”

Sharpens the image. Changing the “Emphasis Level”

value will adjust the strength of emphasis.

• “Off”

Returns to the normal display.

Emphasis Level (When

“Sharpness” is

selected)

1 to 20

(When

“S.R.S.C” is

selected)

Light

Middle

Heavy

Gamma 1.8 to 2.6

DICOM

Adjusts brightness variation.

Backlight 0 to 100 Adjusts brightness of backlight. In case of multiple windows,

select the main screen. The setting cannot be changed

when a screen other than the main screen is selected.

Color Temp 6500 K

9300 K

Off

Switches tone of the image.

R Gain 0 to 100 Adjusts the brightness of red in bright portions.

Table des matières

Autres manuels Eizo Moniteur

Eizo

Eizo DuraVision FDF2304W-IP Guide de l'utilisateur

Eizo

Eizo FlexScan EV3285FX-BK Manuel utilisateur

Eizo

Eizo ColorEdge G2420-BK Manuel utilisateur

Eizo

Eizo ColorEdge CG247X Manuel utilisateur

Eizo

Eizo FlexScan EV2360-WT Manuel utilisateur

Eizo

Eizo FLEXSCAN T1721 Manuel utilisateur

Eizo

Eizo FlexScan L675 Manuel utilisateur

Eizo

Eizo FlexScan T1781 Manuel utilisateur

Eizo

Eizo RadiForce GS520-BL Manuel utilisateur

Eizo

Eizo RadiForce GS520 Guide de démarrage rapide

Eizo

Eizo ColorEdge CS270 Manuel utilisateur

Eizo

Eizo FlexScan L350 Manuel utilisateur

Eizo

Eizo RadiForce MX191 Manuel utilisateur

Eizo

Eizo DURAVISION FDS1901 Manuel utilisateur

Eizo

Eizo RadioForce RX650 Manuel utilisateur

Eizo

Eizo FLEXSCAN T2351W Manuel utilisateur

Eizo

Eizo Raptor SQ2801 Manuel utilisateur

Eizo

Eizo FlexScan S1961 Manuel utilisateur

Eizo

Eizo FlexScan S2401W Guide de l'utilisateur

Eizo

Eizo FlexScan T 565 Manuel utilisateur

Eizo

Eizo FlexScan EV2740X Manuel utilisateur

Eizo

Eizo FlexScan T966 Manuel utilisateur

Eizo

Eizo FORIS FS2332 - Manuel utilisateur

Eizo

Eizo DuraVision FDF2711W-IP Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation