How to use
10
10,000mAh 4-in-1 wireless power
bank
Charge your iPhone or other Qi-
enabled smartphone by centering it
on one of the two Qi spots, indicated
by the logo. If needed, adjust the
positioning of your device to achieve
alignment.
Charge your AirPods wireless
headphones case by laying it on
one of the two Qi spots, indicated
by the logo. If needed, adjust the
positioning to achieve alignment.
The case and the AirPods inside will
charge simultaneously. Your AirPods
will not be charged if they are not
placed inside the case.
Note: The green indicator light on
your AirPods Wireless Charging
Case will automatically turn off a
few seconds after being placed on
a Qi spot. The Power Bar will still
continue to deliver power to the
case after this happens. You may
verify this by checking the Qi spot’s
corresponding indicator LED.
The Power Bar can be used in two ways: as a 10,000mAh 4-in-1 wireless
power bank, or as a 3-in-1 wireless charging dock, perfect for nightstands or
desks.
Please see the “LED indicators” section below for information on the LED
indicator light system.
To turn the Power Bar on or off, short press the ON/OFF button once. The
button is located next to the USB-C port.
1
(Please see the “LED indicators”
section below.)
Charge your Apple Watch device on
the dedicated Apple Watch charging
spot. First lift the spot up, using your
fingers or fingernails to grasp the
edges until the platform secures into
the raised position. Place your Apple
Watch on it to automatically begin
charging. Compatible with all Apple
Watch models.
After wireless charging is completed,
push the charging spot down again
into the Power Bar surface for easy
portability.
Finally, charge your MacBook Air
via the USB-C port and USB-C cable.
The port is also perfect for charging
any other USB-C or Lightning
device up to 30W, including 30W
laptops, tablets, smartphones, action
cameras, speakers, headphones, and
gaming systems. Two cables (USB-C
to USB-C and USB-C to Lightning)
are included.
