EInfochips OpenRD-Client Manuel utilisateur

Page | 1

OpenRD-Base: Quick Start Guide

Designed for Marvell®by eInfochips

QUICK START GUIDE

Thank you for purchasing the OpenRD-Client. The OpenRD-Client uses a

Marvell®88F6281 SoC, which is based on an embedded 1.2 GHz Sheeva™

CPU, equipped with 256 KB L2 cache, 512 MB FLASH and 512 MB DRAM.

Thank you for purchasing the OpenRD-Base. The OpenRD-Base uses a Marvell®

88F6281 SoC, which is based on an embedded 1.2 GHz Sheeva™ CPU, equipped with

256 KB L2 cache, 512 MB FLASH and 512 MB DRAM.

The board supports Linux 2.6.22.18 and UBIFS file system and features 2

Gigabit Ethernet ports, 7 USB 2.0 ports, SATA, eSATA, SD Card, UART, SDIO,

SMBus, TDM (Optional header), Mini USB and JTAG port for debugging. In

addition, the OpenRD-Client extends its capabilities with a 2D-GPU (Graphics

Processing Unit) with a VGA Connector and Audio In/Out ports.

Page | 2

OpenRD-Base: Quick Start Guide

Designed for Marvell®by eInfochips

Shipping Contents

1. OpenRD- Client Board

2. Power Adapter

3. Cables – USB, Cat5/6

4. CD/DVD (Contains documentation and Installation files)

•Quick Start Guide

•User Guide

•Product Brief

•openrd-devkit-v1.0

Before You Begin

Before you start, please make sure you have the following items

•OpenRD-Client board, Power Adapter, USB Cable, CAT 5/6 Cable, CD/DVD

•One VGA display/LCD monitor

Installation Steps

1. Please connect cables (Cat 5/6 cable, USB Mini B, Serial – RS232, RS485, VGA

Cable etc.) to the board as per your application requirements

2. Connect supplied power adapter to the board

3. Apply power to the board

Successful Power On

Following is a screen snapshot of a successful power on, provided that you have

connected the monitor to the board.

If the serial connection is done as per the steps mentioned in user guide, then you

should see following screen shot of POST test immediately after power on.

Page | 3

OpenRD-Base: Quick Start Guide

Designed for Marvell®by eInfochips

__ __ _ _

| \/ | __ _ _ ____ _____| | |

| |\/| |/ _` | '__\ \ / / _ \ | |

| | | | (_| | | \ V / __/ | |

|_| |_|\__,_|_| \_/ \___|_|_|

_ _ ____ _

| | | | | __ ) ___ ___ | |_

| | | |___| _ \ / _ \ / _ \| __|

| |_| |___| |_) | (_) | (_) | |_

\___/ |____/ \___/ \___/ \__|

** MARVELL BOARD: OpenRD-Client LE

U-Boot 1.1.4 (Apr 24 2009 - 13:56:42) Marvell version: 3.4.16

U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CEE80

Soc: 88F6281 A0 (DDR2)

CPU running @ 1200Mhz L2 running @ 400Mhz

SysClock = 400Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6

DRAM CS[0] base 0x00000000 size 256MB

DRAM CS[1] base 0x10000000 size 256MB

DRAM Total size 512MB 16bit width

Flash: 0 kB

Addresses 8M - 0M are saved for the U-Boot usage.

Mem malloc Initialization (8M - 7M): Done

NAND:512 MB

Checking for BootROM Routine Errors

No. of BootROM routine retries: 8

NAND: Nand ECC error

Running POST...

DDR2 data bus test PASSED

DDR2 address bus test PASSED

UART 1 internal loopback test on baudrate 9600 PASSED

UART 1 internal loopback test on baudrate 19200 PASSED

UART 1 internal loopback test on baudrate 115200 PASSED

Device: 0, Size: 512 MB, Page Size: 2 KB, Block Size: 128 KB

NAND detection test PASSED

Bad Block: 15820000

Bad Block: 1b760000

Bad Block: 1dcc0000

NAND bad-block detection test PASSED

RTC test PASSED

6/6 tests PASSED

POST com

leted

Page | 4

OpenRD-Base: Quick Start Guide

Designed for Marvell®by eInfochips

Introduction to IO Ports of OpenRD-Client Board

USB Mini B Connection:

Connect mini B end of

the ‘USB mini B to Type A’ cable to the USB

mini B connector of the OpenRD-Client

SD Card Connection:

Insert the SD Card in the

slot. It is possible to run applications from SD

Card. It can also be used as local storage of

data.

RS485 Connection:

Provides RS485

connectivity. Connect RJ45 Cable as shown in

picture

RS232 Connection:

This connector is UART1

Port, which provides Serial Connectivity.

Connect NULL modem Female RS232 cable as

shown in figure.

Audio In/Out:

Connect Audio Input and Audio

Output cable as shown in picture

VGA Connection:

Connect one end of Male

VGA cable to the connector as shown in picture

and another end to VGA display/monitor.

Page | 5

OpenRD-Base: Quick Start Guide

Designed for Marvell®by eInfochips

Additional Information

Please refer to OpenRD-Client User Guide

http://www.marvell.com/ & http://www.einfochips.com/marvell

USB Connection:

Connect the USB device to

the USB port, located on the front panel of the

OpenRD-Client board. It is possible to run

applications from USB storage device. It can also

be used as local storage of data.

Ethernet Connection:

Connect CAT5/CAT6

cable to GbE0/GbE1 port of the board.

eSATA Connection:

Connect eSATA cable to

the eSATA connector

SMBus Connection:

Connect SMBus Cable to

the SMBus Connector.

Power Connection:

Connect the power supply

to the DC power input connector located in the

front panel of the OpenRD-Client board and

connect the other end to your local power outlet.

Table des matières

Autres manuels eInfochips Ordinateur monocarte

eInfochips

eInfochips iMX8XML Manuel utilisateur

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur

eInfochips OpenRD-Client Manuel utilisateur

Manuels Ordinateur monocarte populaires d'autres marques