EINBREW 30L Manuel utilisateur

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

INTRODUCTION

Congratulations on your investment in an EINBREW automatic all-grain brewing system! This will help

you brew better and more consistent beer by automating and controlling the brewing process, ensuring

that you have accuracy and repeatability every time –leaving you to worry about the important things

whilst we take care of the drudgery!

EINBREW allows you to store and brew multi-stage all-grain recipes, maximising the efficiency of

extraction of sugars from your grain using its central upwards forced infusion. As you can pump during

boil you can also get the best out of your hops –and reduce the chance of scorching!

Our integrated cooling system and pump out method allows to you transfer your wort into a fermenter

with a minimum of fuss, and more importantly, less chance of infection.

These user instructions will help you get the best out of your EINBREW system and allow you to use it

safely, and we recommend you read through them fully before starting your brew day!

EINBREW.COM 
 EINBREW 30L USER INSTRUCTIONS 
 
V1.0.8 521 © ACKSEN LTD 2019 
3 
 
CONTENTS 
Introduction ....................................................................................................................................................2
Contents..........................................................................................................................................................3
Safety Information ..........................................................................................................................................4
Technical Specifications..................................................................................................................................5
Components and Accessories.........................................................................................................................6
Getting Started ...............................................................................................................................................7
Cleaning ..........................................................................................................................................................8
Before using EINBREW for the first time ....................................................................................................8
Cleaning EINBREW after your brew day .....................................................................................................8
Configuring EINBREW ...................................................................................................................................10 
Handheld Controller .................................................................................................................................10 
Main Menu................................................................................................................................................10 
Start Brewing Menu..................................................................................................................................11 
Settings Menu...........................................................................................................................................12 
Rinse Menu ...............................................................................................................................................13 
Pump Out Menu .......................................................................................................................................14 
Recipes Menu ...........................................................................................................................................15 
Brewing Wort................................................................................................................................................18 
Preparing for Brewing...............................................................................................................................18 
Mashing ....................................................................................................................................................20 
Grain Removal...........................................................................................................................................21 
Boiling Wort ..............................................................................................................................................22 
Cooling Wort.............................................................................................................................................23 
Brew Complete and Pumping Out ............................................................................................................24 
Cleaning ....................................................................................................................................................25 
Troubleshooting............................................................................................................................................26 
Volumes and Masses (weights) ....................................................................................................................29 
Warranty.......................................................................................................................................................29 
Maintenance.................................................................................................................................................29 
Returning EINBREW for repair ......................................................................................................................30 
WEEE Regulations .........................................................................................................................................30 

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

SAFETY INFORMATION

•Please inspect your EINBREW system and accessories for damage when you receive it. If there is

any damage, please do not use the system and contact your supplier or Support for assistance.

•Do not operate the system if the power lead shows any signs of damage or wear.

•When manually cleaning your EINBREW system, please ensure that it is fully disconnected from

the mains supply beforehand. We recommend removing the plug from the socket to ensure

disconnection. Also ensure that you do not allow liquid to come in contact with the control

systems located underneath the main EINBREW vessel, and ensure the vessel is dry before

reconnecting the electricity supply.

•The EINBREW 30L MUST be used with a RCD/GFCI/RCBO device. Ensure that you test it prior

to every use.

•Ensure that the supplied power lead is fully unwound during use. If using any extension leads,

ensure that they are fully unwound and have a >10A current capacity when unwound.

•EINBREW is not meant to be directly utilised by children or vulnerable adults, or around pets.

Please ensure that the device is only used with adequate supervision to ensure safety.

•EINBREW will become extremely hot during use (temperatures up to and exceeding 100°C).

Please ensure that you take great care around the system, lid and accessories when it is in use.

Please wear gloves/protection equipment when working on or around EINBREW.

•As condensation may form on the lid during use, please ensure you angle the lid over the system

to allow any hot liquid to run off.

•EINBREW must be installed on a stable, level surface. Do not use on rough or uneven surfaces.

•Do not move the EINBREW system during use. Ensure that it is empty and fully cooled before

moving. The handles on the side of the vessel will become hot during use.

•When removing the internal vessel during the mashing process, it will be very hot and contain

hot wort and grains. Please exercise care when removing.

•EINBREW does not contain any user serviceable parts, and should not be disassembled or repairs

attempted. Please contact your supplier or Support for any assistance required.

•Please be careful when pumping out liquid from EINBREW, especially if you have opted not to

cool wort beforehand. Ensure that you do not disconnect any pipes during pump out.

•EINBREW features boil dry protection which will switch off the heating element if the water level

is too low. To reset this, please wait for the system to cool down, then press the reset button

underneath the main vessel.

•Use Hop bags or a hop basket to insert hops; this minimises the possibility of blockages in the

main filter.

•DO NOT USE THIS PRODUCT AS AN ISOLATION DEVICE, TO ISOLATE PUMPS, ELEMENTS OR ANY

EQUIPMENT.

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

TECHNICAL SPECIFICATIONS

Feature

30L

Product Dimensions

Diameter 550mm, Height 780mm

Power Supply Input

220Vac/230Vac, 50Hz, 10A

Fuses

Two (live and neutral) 15A, 32x5mm quick blow.

Control Precision

0.3C

Temperature Measurement Accuracy

0.3C

Heating Element

2100W, 9.5A @ 230Vac

Main Vessel Capacity

Max. ~45L

Inner Vessel Capacity (Grain)

Max. capacity is 18L, about 9kg.

Pump

3m Head, 16W

Product Weight (empty)

18kg

Product Weight (packaged)

~25kg, 600mm x 600mm x 800mm

Control Unit Enclosure

Sealed to IP65 standard

Handheld Enclosure

Sealed to IP54 standard

Maximum Wort Volume

40L/45L (10.5 US gal)

Max Grain Bill

Max. capacity is 18L, about 10kg.

Minimum Water Volume

10L, 26L, refer to Volume and Masses Section.

Circulate when boiling

YES

Wort Pumped out

YES

Tap

No (not needed, wort pumped out)

Audible / visible stage alarms

YES

Audible / visible cooling alarm

YES

Programmable Recipes

YES, 10 recipes with 9 programmable mash steps each

Microprocessor Control

YES

Hop Insertions Alarms

YES, 9 programmable insertion alarms

Controller position

Flexible, handheld.

Hop filtering

YES

Integral cooler

YES

Automatic Cleaning Cycle

YES

Ergonomic Design

YES

Limited Lifetime Warranty

YES

Product Compliance

CE and LVD Compliant

Country of Manufacture

Northern Ireland

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

COMPONENTS AND ACCESSORIES

Your EINBREW system will come shipped with the following components. When you unpack please

ensure you check everything is there, and if any parts are missing please contact your supplier or Support

immediately.

1) 1 x EINBREW stainless steel main heating vessel and control system with 2m power lead.

2) 1 x Stainless steel inner grain vessel.

3) 1 x Handheld controller.

4) 1 x Pump-out pipe.

5) 1 x Measuring paddle.

6) 1 x Circulation (bazooka) filter.

7) 1 x Grain vessel filter lid.

8) 1 x Outer vessel lid.

9) 1 x User Instructions (detailed).

10) 1 x Quick Start Guide & Safety Guide.

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

GETTING STARTED

We know you’re eager to get on with making some beer, so the first thing to do is get your EINBREW

system setup!

Once you’ve checked you’ve got everything, place your EINBREW on a flat and level surface near a power

outlet. Take care not to damage the attached power lead.

EINBREW 30L should be connected to an electric outlet suitable for the total electrical load. The supply

MUST be protected by an RCD/GFCI/RCBO device, for your safety –please test the RCD/GFCI/RCBO

device before each use, using the built-in test function.

IF YOU DO NOT UNDERSTAND THE ABOVE STATEMENT, PLEASE CONSULT A LOCAL EXPERT.

Attach the plug for the Handheld controller wired lead to the round socket on the side of the main vessel.

If you intend to use the built-in cooling function that EINBREW provides, please insert your cold water

feed and waste water feed to the marked quick-release connectors on the rear of the vessel, it does not

matter which is flow and which is exhaust. Please do not turn on the water feed until required, and

especially ensure that it is disconnected before you attempt to connect.

If you’re setting EINBREW up for the first time, please ensure that rinse and clean the unit before use,

follow the instructions in the Cleaning section.

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

CLEANING

Thanks to our automatic cleaning cycle, cleaning EINBREW is a breeze! Please ensure that you disconnect

the system from the electrical mains supply before carrying out any manual cleaning steps, however.

Before using EINBREW for the first time

Insert the inner grain vessel UPSIDEDOWN in the main vessel and set the inner filter lid on top. Ensure

that you remove any obvious debris from inside the system, and then pour approx. 15L of water inside

the main vessel, let the levels equalise in both the inner and outer (main) vessels. Place the lid on top of

the system.

Once you’ve finished adding water, please connect EINBREW to the electrical mains supply. You will see

the screen on the handheld controller display become active. Choose the Rinse option on the main menu

and follow the on-screen instructions –this will heat and circulate water around the EINBREW system to

clean it.

When the programme has completed, please allow the system to cool for some time so that it’s safe to

work with. The Brew Temperature indicated on the display reflects the internal water temperature.

Once this has completed, slowly remove the inner vessel. Place this to one side, e.g. inside a bucket to

ensure any liquid is captured.

Use the Pump Out menu option to remove all the liquid from EINBREW into a bucket or other vessel.

Once the liquid level gets too low for the pump, please stop the pump, and disconnect the controller and

the EINBREW from the mains, you can then lift the EINBREW by the rear cable recess and tip out any

remaining water.

Your EINBREW is now ready to make wort!

Cleaning EINBREW after your brew day

Remove all grain from the inner grain vessel and dispose of it. Please be careful as the grain may still be

hot or contain traces of hot liquid. The Bazooka filter can be unscrewed horizontally and then removed

for cleaning. Once disconnected from the mains electricity supply, the main vessel can be rinsed and the

liquid pumped out in manual mode and/or tipped out.

Remove the hops from the bottom of the main vessel. There may still be hot liquid so please take care.

Insert the inner grain vessel UPSIDEDOWN in the main vessel and set the inner filter lid on top. Ensure

that you remove any obvious debris from inside the system, and then pour between 12L and 15L of water

inside the main vessel, place the outer lid on top of the system.

Connect the EINBREW to the electrical mains supply. You will see the screen on the handheld controller

display become active. Choose the Rinse option on the main menu and follow the on-screen instructions

–this will heat and circulate water around the EINBREW system to clean it. Once you commence the

cleaning cycle, make sure to observe that the water level does not fall below the top of the heating

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

V1.0.8 521 © ACKSEN LTD 2019

element, if it does insert more water to ensure it stays above the element. Place the outer lid on the

EINBREW and let it complete its cleaning cycle.

When the programme has completed, please allow the system to cool for some time so that it’s safe to

work with. The Brew Temperature indicated on the display reflects the internal water temperature.

Once this has completed, slowly remove the inner vessel, allowing the hot water to drain out. Place this

to one side, e.g. inside a bucket to ensure any liquid is captured.

Use the Pump Out menu option to remove all the liquid from EINBREW into a bucket or other vessel.

Once the liquid level gets too low for the pump, please stop the pump, and disconnect the controller and

the EINBREW from the mains, you can then lift the EINBREW by the rear cable recess and tip out any

remaining water.

Please be careful carrying this out if the liquid temperature is still hot.

Take care if you are ever running the system with the inner vessel in place, but with no grain! When in

this state, the system needs 26 litres of water. As the pump will fill the inner vessel and this will lower

the liquid level around the element, if the element becomes exposed to air, it can fuse and fail. The

system is designed to take account of grain volumes. TO BE SAFE, assume that each 1kg of grain has a

volume of 1.2 litre.

With the inner grain vessel removed the system needs only around 10L to cover the element.

EINBREW.COM

EINBREW 30L USER INSTRUCTIONS

CONFIGURING EINBREW

Handheld Controller

The Handheld Controller features a 4x20 character OLED display to keep you updated on how your brew

is going, along with a full menu system to let you configure your recipes and system settings.

When EINBREW is not in use, the display will indicate that it is in Standby mode, along with the present

Date and Time. The “signal” icon at the top-right of the display indicates that the Handheld controller is

connected to the EINBREW system successfully. The temperature of the main vessel is indicated at the

bottom as the Wort temperature.

The ▲▼◄► and OK buttons are used to navigate through the menu system and choose/alter settings.

Main Menu

To access the menu system, press the OK button when the system is in Standby mode. The menu will be

displayed and you can navigate using the ▲or ▼buttons. Press OK to activate the selected top menu

item, denoted by a > symbol to the left-hand side of the display. The title of the present menu is always

displayed at the top of the screen.

Menu Option

Explanation

Start Brewing

Begin brewing Wort with a recipe of your choice.

Table des matières

Manuels Système de brassage populaires d'autres marques

CBF-DRINKIT

CBF-DRINKIT Coobra CB25 Manuel utilisateur

Toddy

Toddy ARTISAN Manuel utilisateur

Bunn

Bunn GRX Manuel utilisateur

Keurig

Keurig Vue Manuel utilisateur

VKI Technologies

VKI Technologies Zuma Brewer Manuel d'utilisation

Speidel

Speidel Braumeister PLUS 10 litres Manuel utilisateur

BrewBuilt

BrewBuilt X2 UNI Manuel utilisateur

Tribest

Tribest RAW TEA KETTLE Manuel utilisateur

Sprowt Labs

Sprowt Labs Acro Manuel utilisateur

KegLand

KegLand Robobrew Manuel utilisateur

BRAVILOR BONAMAT

BRAVILOR BONAMAT Aurora GTBSH-001 Manuel utilisateur

Fetco

Fetco CBS-1221 Caractéristiques techniques

Curtis

Curtis ThermoPro G4 Series Manuel utilisateur

Animo

Animo ComBi CB5 Manuel utilisateur

MoreBeer

MoreBeer BrewSculpture Manuel utilisateur

Keurig Hot

Keurig Hot Commercial Series Manuel utilisateur

Keg King

Keg King KEGMASTER XL Manuel utilisateur

Blichmann Engineering

Blichmann Engineering BrewEasy Compact TC Instructions d'installation