Eicon Networks ISDN NT1 Unit Manuel utilisateur
Page 1 of 1 24/08/01
ISDN NT1 Unit
Hardware Features
•One U interface connector (RJ45)
•Two S/T interface connectors (RJ45)
•One EiconCard direct S/T-interface (4-pin DIN connector)
•Point-to-Point and Multipoint support
•Three LEDs (power, line, loopback)
•External Power Supply (9VDC @150mA)
•Switch setting for Open/50/100 ohm terminating resistors, with fixed or adaptive timing
S/T interfaces (RJ45)
•two-pairs, full duplex
•Pseudo-ternary line code (CCITT inverted AMI)
•Voltage 0.7V zero-to peak
•Line speed 192 Kbps (144 Kbps available to customer)
U interface
•one pair, full duplex
•2B1Q line code, as per ANSI T1.601 - 1992
•Voltage 2.5V zero-to peak
•Line speed 192 Kbps (144 Kbps available to customer)
Environmental Requirements
•Operating temperature: 32°F to 140°F (0°C to 60°C)
•Operating Humidity: 20% to 80% non-condensing
•Storage temperature: -77°F to 140°F (-25°C to 60°C)
Certification
•FCC Part 15, Class B
•CSA-NRTL (UL 1459)
•IC CS03 Issue (D.O.C)
Warranty
•5 years
Dimensions
•3 ¼ " (W) x 1 ¼" (H) x 4 5/8" (D)
Packaging Contents
•ISDN NT1 unit
•Installation Guide
•External Power supply
•RJ45 cable
Autres manuels pour ISDN NT1 Unit
1
Table des matières
Autres manuels Eicon Networks Adaptateur
Eicon Networks
Eicon Networks Diva Server Series Manuel utilisateur
Eicon Networks
Eicon Networks Eiconcard C90 Manuel utilisateur
Eicon Networks
Eicon Networks Eiconcard C20 Manuel utilisateur
Eicon Networks
Eicon Networks Eiconcard C90 Manuel utilisateur
Eicon Networks
Eicon Networks Eiconcard C20 Manuel utilisateur
Eicon Networks
Eicon Networks Diva Server Adapters Manuel utilisateur
Eicon Networks
Eicon Networks ISDN NT1 Unit Manuel utilisateur
Eicon Networks
Eicon Networks Diva Server V-BRI-2 Manuel utilisateur
Eicon Networks
Eicon Networks Eiconcard C90 Manuel utilisateur
