Ei Electronics Ei405TY RF Optical Manuel utilisateur

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

Web: www.eielectronics.com

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei405TY DataSht RevB

Model Ei405TY RF Optical

RF wireless interconnect

Unique house coding feature

Visual RF transmission indicator

High performance optical chamber with integral

insect screen

Test/Hush button

Advanced suppression and calibration technology

Radio transmitter and receiver in each alarm

Built in auto self test feature

Powered for life with lithium batteries

Low power cell warning

Kitemarked to BS EN 14604:2005

5 year guarantee

Product Description

The Ei405TY is an Optical Smoke Alarm powered by

long lasting lithium batteries designed to last the life of

the product. It is part of the RadioLINK range of RF

alarms. The RF signal will wirelessly interconnect the

Ei405TY to other RadioLINK products

The Ei405TY uses advanced radio transciever

technology with unique software coding to transmit and

receive the radio signals. The transmissions are

frequency modulated (FM) and use Manchester coding

to ensure robust signal integrity and avoid signal noise

interference

The RF range can be extensively improved by converting

the alarm into a “repeater” i.e. re-transmission of the RF

signals. The Ei405TY series alarms can be used as a

stand alone wireless interconnect system or be

incorporated into existing home security systems

The Ei405TY has other advanced features such as high

performance optical chambers fitted with integral insect

screens to reduce the chances of false alarms, as well

as the ability to wireless interconnect up to twelve alarms

to allow all alarms to sound if just one of the

interconnected alarms should be triggered.

The Ei405 has built in circuitry to aid suppression of

voltage transients and RF interference.

Operation

The red indicator will flash every 40 seconds to

show that the detector has performed an automatic

self test

In normal standby mode the blue indicator will light

to indicate transmission of an RF signal

In code mode, the blue indicator will flash to indicate

the number of other RF alarms that have been

“learned” in the system

The red indicator will flash rapidly to show an alarm

condition for the smoke detector

The “Test/Hush” button will either silence false

alarms or perform a unit self test

In “Hush” mode the alarm enters a ten minute period

of reduced sensitivity and the red light flashes every

10 seconds and then resets

When interconnected to other Ei mains powered

alarms, an alarm on one detector will trigger all other

interconnected alarms within one second (only the

triggered alarm will flash a red indicator)

The smoke detector will emit a beep and the red

light flashes every 40 seconds to indicate that the

battery is depleted and needs to be changed

TEN YEAR BATTERY POWERED 9V

RF Communication

Shannon Free Zone, Shannon, Co. Clare, Ireland.

Ph.+353 61 471277 Fx.+353 61 471053

Email. [email protected]

Web: www.eielectronics.com

E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. Ei405TY DataSht RevB

Model Ei405TY RF Optical

Installation & Placement

Place the mounting plate on the ceiling/wall and mark the screw holes. Drill

with a suitable drill bit, insert the screw plugs and screw the plate into position.

Simply slide the alarm into position on the mounting plate (this also activates

the battery connection).

The RF alarms should be house coded to prevent possible interference from

neighbouring installations –see instructions for more details.

Alarms should be placed in accordance with the general guidelines shown in

the diagram above. These recommendations are based on the problem of

areas of “dead air” close to corners of rooms and apexes of ceilings, which

could result in the prevention of smoke reaching the smoke detector

House Code Procedure

1. Connect the battery (by

sliding onto the plate)

2. Hold the house code switch

(with a small screwdriver)

until the blue light turns on

and then release

3. Similarly, place other alarms

into house code mode

4. Check that the number of

blue flashes (on each alarm)

corresponds to the number of

alarms in your system

5. Remove all alarms from

house code

6. Button test each alarm to

check your system

Technical Specification

Sensor Optical, uses light scatter from

smoke

Sensitivity: Complies with BS 5446 Part 1:

2000

Automatic Self-Test: Smoke Chamber is tested every 40

Sec. and unit beeps (without LED

flash) if it is degraded.

Supply Voltage: 9V sealed lithium batteries

RF Range1:150 meters (min) free space

RF Visual Indicator: Blue light flashes continuously for

1.5 to 3.5 seconds while

transmitting RF signal

RF Frequency: 868.499MHZ (1% duty cycle)

RF Power: +5dBM

Dimensions: 152mm diameter x 50mm depth

Weight: 321g

Power-On Indicator: Red light flashes every 40 seconds

Alarm: Electronic Piezoelectric horn

Alarm Sound Output: 85dB (minimum) at 3m

Alarm Status: Red LED flashes every second on

unit sensing fire

Temperature Range: 00to 400C

Humidity Range: 15% to 95% Relative Humidity

Interconnect: Up to 12 RadioLINK products

Plastic material: UL94VO flame retardant

Warranty: 5 year (limited) warranty

Approvals: Kitemarked to BS EN 14604: 2005,

CE Approved

Specifications are subject to change

1. Any obstructions of any sort will result in a reduction in range from

the free space specification. As such, the actual range will vary

depending on installation.

Table des matières

Autres manuels Ei Electronics Détecteur de fumée

Ei Electronics

Ei Electronics Ei 100R Ionisation Manuel utilisateur

Ei Electronics

Ei Electronics Ei161e Manuel utilisateur

Ei Electronics

Ei Electronics Ei2110e Series Manuel utilisateur

Ei Electronics

Ei Electronics EI 170 Manuel

Ei Electronics

Ei Electronics Heat Alarm Ei 164R Heat Manuel utilisateur

Ei Electronics

Ei Electronics Ei160 Manuel

Ei Electronics

Ei Electronics Ei175 Ionisation Manuel utilisateur

Ei Electronics

Ei Electronics EI 100B Standard Manuel

Ei Electronics

Ei Electronics Ei141 Ionisation Manuel utilisateur

Ei Electronics

Ei Electronics Ei 105R Optical Manuel utilisateur

Ei Electronics

Ei Electronics EI 100L Emergency Light Manuel utilisateur

Ei Electronics

Ei Electronics Ei603MRF Manuel utilisateur

Ei Electronics

Ei Electronics aico Ei146e Manuel utilisateur

Ei Electronics

Ei Electronics EI 100C Interconnect Manuel utilisateur

Ei Electronics

Ei Electronics Ei 175 Ionisation Manuel utilisateur

Ei Electronics

Ei Electronics Ei154TL Manuel utilisateur

Ei Electronics

Ei Electronics EIB140RC Series Manuel utilisateur

Ei Electronics

Ei Electronics Ei3105RF Optical Manuel utilisateur

Ei Electronics

Ei Electronics Ei603 Series Manuel utilisateur

Ei Electronics

Ei Electronics EI 103C Manuel

Ei Electronics

Ei Electronics Ei 151TLR Ionisation Manuel utilisateur

Ei Electronics

Ei Electronics Ei 105B Manuel utilisateur

Ei Electronics

Ei Electronics Ei 156TLR Optical Manuel utilisateur

Ei Electronics

Ei Electronics MCP401RC Manuel utilisateur

Manuels Détecteur de fumée populaires d'autres marques

x-sense

x-sense SD19-W Manuel utilisateur

BRK electronic

BRK electronic First Alert P1010 Manuel utilisateur

FireAngel

FireAngel Thermoptek ST-622 Manuel utilisateur

teko

teko Astra-42A Manuel utilisateur

Safetec

Safetec SDS-2/6 Manuel du propriétaire

Siemens

Siemens PE-11C Manuel utilisateur

System Sensor

System Sensor DH500ACDC Manuel utilisateur

Resolution Products

Resolution Products RE612 CryptiX Manuel utilisateur

First Alert

First Alert PC900V Manuel utilisateur

Eminent

Eminent EM6590 E-Domotica Manuel utilisateur

Carrier

Carrier Kidde Quell Q301 Manuel utilisateur

VESDA

VESDA VLF-500 Manuel utilisateur

ELRO

ELRO FS8110 Manuel utilisateur

Heiman

Heiman SMOKI NS-626PHS Manuel utilisateur

Regin

Regin SDD-S65 Manuel utilisateur

Family Gard

Family Gard FG225 Manuel utilisateur

Greystone

Greystone DSD120 Manuel utilisateur

Aparton

Aparton ASD-10 Manuel utilisateur