The technical materials and informations contained in this document are strictly confidential and exclusive property of Advanced Microwave Engineering s.r.l.
These materials and informations are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce in whole or in part without express written permission.
The manufacturer, Advanced Microwave Engineering Srl, hereby declares that the type of radio
equipment P LX HUB SR, PLX TAGSAFETY 3H, PLX TAGSAFETY 3TH, P LX SAFEMOVE DIS, P LX
SAFEMOVE CPU, PLX SAFEMOVE HUB 4, PLX SAFEMOVE HUB 4M, PLX SAFEMOVE SENS 4, PLX
SAFEMOVE SENS 4M complies with the RED directive 2014/53/EC. The full text of the EU
Declaration of Conformity is available on the following Internet address:
http://www.ameol.it/en/declaration-of-conformity/
3SAFETY INSTRUCTIONS
3.1 DISPOSAL
Treatment of the electrical or electronic device at the end of its service life (applicable in all European Union
countries and in other European Countries with waste sorting system) This symbol indicates that the product
must be taken to a suitable collection point for recycling electrical and electronic equipment.
The EGOpro Safe MOVE 4.0 System is a set of electrical and electronic equipment
By making sure that this product is correctly disposed of, you will contribute to preventing potential negative
consequences for the environment and for health that would otherwise be caused by its improper disposal.
Recycling these materials helps to preserve natural resources. For more detailed information about this product
recycling, you can contact the municipal office, the local waste disposal service. In case of unauthorised
disposal of electrical and/or electronic equipment, the penalties foreseen by the applicable regulations could be
applied (valid only for Italy).
3.2 LIMITATIONS FOR USE
Upon installing the system in industrial vehicles, strictly follow the instructions given by the manufacturer of the vehicle contained in
the manual (electrical and mechanical connection, etc.). Only duly trained personnel must install the system. The forklift truck
should not be modified in such a way as to render the Declaration of Conformity null and void.
If the installation does not comply with the instructions contained in the manufacturer’s manual, AME shall not be held liable for
any damage to the vehicle or its poor performance.
The EGOpro Safe MOVE 4.0 system (the Product) is a safety supporting tool to prevent man-vehicle and vehicle-vehicle collisions.
This is not a personal safety system.
This system has been designed to offer an additional aid for driving. While driving, the driver’s total attention is always required. The
driver must always be read to intervene and put on the brakes and turn the steering-wheel to avoid possible collisions. The EGOpro
Safe MOVE 4.0 system does not replace the driver’s attention and judgement or need to slow down or brake in case of danger, and
it does not exonerate the purchaser and the driver from adopting the usual safety procedures foreseen.
The control of the vehicle is still under the driver’s responsibility, who must always assess the current conditions in which the vehicle
moves, paying attention to the presence of pedestrian workers, other vehicles and obstacles in general.
In no case shall AME be held liable for direct or indirect damage of any kind (personal injuries or damage to objects) suffered for any
reason whatsoever by the Purchaser or by third persons due to the use of the Product.
The EGOpro Safe MOVE 4.0 system is a product for professional use, and it may not be used in places frequented by children.
