EGO BBA2100 Manuel utilisateur
OPERATOR'S MANUAL
BRISTLE BRUSH ATTACHMENT
MODEL NUMBER BBA2100/BBA2100-FC
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
Español p. 57
Français p. 28
EXCLUSIVELY FOR USE WITH
EGO POWER+ POWER HEAD
PH1400/PH1400-FC
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC2
TABLE OF CONTENTS
Safety Symbols ..........................................4
Important Safety Instructions .............................5-9
Introduction ............................................10
Specications ..........................................11
Packing List ............................................11
Description .........................................12-13
Assembly ...........................................14-18
Operation ...........................................19-20
Maintenance ........................................21-23
Troubleshooting ......................................24-25
Warranty ...........................................26-27
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
OPERATOR'S MANUAL
WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of California
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
◾Lead from lead - based paints
◾Crystalline silica from bricks and cement and other masonry products, and
◾Arsenic and chromium from chemically - treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemical: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to lter out microscopic particles.
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC4
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger. The
instructions and warnings they give are no substitutes for proper accident prevention
measures.
WARNING: Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, re, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING! The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shield and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye protection
which is marked to comply with ANSI Z87.1.
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate it.
Safety Alert Indicates a potential personal injury hazard.
Read &
Understand
Operator's
Manual
To reduce the risk of injury, user must read and
understand the operator’s manual before using
this product.
Wear Eye
Protection
Always wear safety goggles or safety glasses
with side shields when operating this product.
Wear Protective
Gloves
Protect your hands with gloves when handling
blades. Heavy-duty, nonslip gloves improve your
grip and protect your hands.
Ricochet Thrown objects can ricochet and result in
personal injury or property damage.
Brush Thrust Thrust reaction generated when rotating brushes
contact the ground.
Recycle Symbols
This product uses lithium-ion (Li-ion) batteries.
Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your
local waste authority for information regarding
available recycling and/or disposal options.
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC6
IPX4 Ingress Protection
Degree Protection from splashing water
V Volt Voltage
mm Millimeter Length or size
in. Inch Length or size
kg Kilogram Weight
lb Pound Weight
°C Celsius
Temperature Temperature
°F Fahrenheit
Temperature Temperature
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC 7
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electric bristle brush, basic safety precautions should
always be followed to reduce the risk of re, electric shock, and personal injury,
including the following:
READ ALL INSTRUCTIONS
DANGER! Do not rely on the tool’s insulation against electric shock. To
reduce the risk of electrocution, never operate the tool in the vicinity of any
wires or cables which may carry electric current.
CAUTION! Wear appropriate personal hearing protection during use. Under some
conditions and durations of use, noise from this product may contribute to hearing loss.
◾Keep Children Away - All visitors should be kept at least 100 feet away from
work area.
◾Avoid Dangerous Environments – Don’t use appliances on damp or wet slope.
◾Dress Properly - Do not wear loose clothing or jewelry. They can be caught in
moving parts. Use of rubber gloves and substantial footwear is recommended
when working outdoors. Wear protective hair covering to contain long hair.
◾Use Safety Glasses - Always use face or dust mask if operation is dusty.
◾Use the Right Tool - Do not use the tool for any job except that for which it is
intended.
◾Don’t Force the Bristle Brush - It will do the job better and with less likelihood
of a risk of injury at the rate for which it was designed.
◾Don’t Overreach - Keep proper footing and balance at all times.
◾Stay Alert - Watch what you are doing. Use common sense. Do not operate the
bristle brush when you are tired.
◾Do not operate the bristle brush while under the inuence of alcohol or
drugs.
◾Keep guards in place and in working order.
WARNING! To reduce the risk of injury to persons, do not operate without
guards in place.
◾Keep hands and feet away from the cutting area.
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC8
◾Store Bristle Brush Indoors - When not in use the bristle brush should be
stored indoors in a dry and high or locked-up place with the battery pack
removed- out of reach of children.
◾Maintain Bristle Brush With Care - Keep the bristle brush attachment clean
for bestperformance and to reduce the risk of injury. Follow the instructions for
changingaccessories. Keep the handles dry, clean, and free from oil and grease.
◾Check Damaged Parts - Before further use of the bristle brush, a guard or
otherpart that is damaged should be carefully checked to determine that it
will operateproperly and perform its intended function. Check for alignment of
moving parts,binding of moving parts, breakage of parts, mounting, and any other
conditionthat may affect its operation. A guard or other part that is damaged
should beproperly repaired or replaced by an authorized service center unless
indicatedelsewhere in this manual.
◾Clear the area to be cut before each use. Remove all objects such as rocks,
broken glass, nails, wire, or string that can be thrown or become entangled in the
bristle brush attachment. Make sure that other persons and pets are at least 100
ft. (30.5m) away.
◾Always hold the bristle brush rmly, with both hands on the handles,
while operating. Wrap your ngers and thumbs around the handles.
◾Avoid Accidentally Starting – Don’t carry the bristle brush with your nger on
the trigger.
◾Do not operate the bristle brush in gaseous or explosive atmospheres.
Motors in these appliances normally spark, and the sparks might ignite fumes.
◾Damage to Bristle Brush - If you strike a foreign object with the bristle brush
or it becomes entangled, stop the tool immediately, check for damage and have
any damage repaired before further operation is attempted. Do not operate with a
broken guard.
◾If the equipment should start to vibrate abnormally, stop the motor and
check immediately for the cause.
◾Replace a damaged brush roller immediately. Such attachments may
shatter at high speed and cause serious or fatal injury.
◾Check the bristle brush attachment at regular short intervals during
operation, or immediately if there is a noticeable change in sweeping
behavior.
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC 9
◾To reduce the risk of injury from loss of control, never work on a
ladder or on any other insecure support. Never hold the bristle brush
attachment above waist height.
◾Do not charge the battery pack in rain, or in wet locations.
◾Use Only With The 56V Lithium-Ion Power Head PH1400/PH1400-FC.
◾Do not dispose of the battery in a re. The cells may explode. Check with
local codes for possible special disposal instructions.
◾Do not open or mutilate the battery. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
◾Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
◾Replacement Parts - When servicing, use only identical EGO replacement parts.
Use of any other accessory or attachment may increase the risk of injury.
◾Battery tools do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. Be aware of possible
hazards even when the tool is not operating. Take care when performing
maintenance or service.
◾Remove or disconnect battery pack before servicing, cleaning or
removing material from the bristle brush.
◾Do not wash with a hose; avoid getting water in motor and electrical
connections.
◾Do not expose a battery pack or tool to re or excessive temperature.
Exposure to re or temperature above 212 °F (100°C) may cause explosion.
◾If situations occur that are not covered in this manual, use care and
good judgment. Contact the EGO Customer Service Center for assistance.
◾Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also lend
these instructions to them to prevent misuse of the product and possible injury.
NOTE: SEE YOUR POWER HEAD OPERATOR’S MANUAL FOR
ADDITIONAL SPECIFIC SAFETY RULES.
BRISTLE BRUSH ATTACHMENT — BBA2100/BBA2100-FC10
INTRODUCTION
Congratulations on your selection of the EGO BRISTLE BRUSH. It has been designed,
engineered and manufactured to give you the best possible dependability and
performance.
Should you experience any problem you cannot easily remedy, please contact EGO
Customer Service Center 1-855-EGO-5656.
This manual contains important information on the safe assembly, operation and
maintenance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
Autres manuels pour BBA2100
1
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Manuels Machine de plancher populaires d'autres marques
Nilfisk-Advance
Nilfisk-Advance Advance SC370 17B Manuel utilisateur
Numatic
Numatic ET 4045 Manuel utilisateur
HAWK ENTERPRISES
HAWK ENTERPRISES HP1513-180BRUTE Manuel utilisateur
Mytee
Mytee 8070 Mytee-Lite Manuel utilisateur
Kärcher
Kärcher B 140 R Manuel utilisateur
Triple S
Triple S Ace 26T1 Manuel utilisateur
