EGO BH1000 Manuel utilisateur
REPAIR GUIDELINE
BACKPACK HARNESS_BH1000
Version: 1
Issue Date: 2017/09/11
1. Remove the battery from the backpack harness.
2. Remove the strap and hook from harness (refer to the operator’s manual).
Description
Part Number
QTY.
Backpack subassembly
2825497001
1
Hook
3129102001
1
1
BH1000 Backpack Harness
Backpack subassembly
Hook
Strap
3. Loosen and remove the 10 screws to disassemble the rear housing.
Description
Part Number
QTY.
Rear housing
3322283001
1
Tapping screw
5610294001
10
Rear housing
2
Tapping screw
BH1000 Backpack Harness
4. Loosen screw 1&2 to remove cord anchor, disconnect connectors 1&2 and remove the
power cord ASSY. If power cord ASSY is broken, replace it with a new one.
3
Description
Part Number
QTY.
Power cord ASSY
4810227001
1
Cord anchor
3700285001
1
Tapping screw
5610294001
2
Tapping screw
Power cord ASSY
1
Connector 1
Connector 2
Note : Align the wires in the
groove after replacing as
shown in the picture below.
Cord anchor
BH1000 Backpack Harness
5. Loosen screws 3,4,5,6,11&12 then remove the cord anchor, which is attached with a
sponge pad. Disconnect connectors 1&2 to totally separate the electric assembly from
the front housing.
4
Description
Part Number
QTY.
Self tapping screw
5610274001
10
Sponge pad
3706436001
1
Cord anchor
3700285001
1
Electric assembly
2830264001
1
BH1000 Backpack Harness
Electric assembly
6
3
5
4
Connector 1
Connector 2
Note: Align the wires in the
groove after replacing as
show below.
Sponge pad
Cord anchor
Self tapping screw
Description
Part Number
QTY.
Description
Part Number
QTY.
Support
3128359001
1
Power pack button #2
3127498001
1
Spring
3660013003
1
Front housing
3129073001
1
Power pack button #1
3127497001
1
Dust cover
3128361001
2
BH1000 Backpack Harness
6. Loosen 7,8,9&10 to remove the dust cover. Replace the broken one in the below table.
7
10 9
8
Support
Power pack button #2
Front housing
Dust Cover
Power pack button #1
5
Spring
BH1000 Backpack Harness
NOTICE: When assembling the power pack button #1 and power pack button #2 into the
front housing, pre-assemble the spring onto the power pack button #1 and and then
follow the steps below to locate the buttons into the groove of the housing.
6
Power pack button #1 Power pack button #2
7. Loosen the 4 screws to remove the bottom support.
Description
Part Number
QTY.
Bottom support
3129071001
1
Tapping screw
5610294001
4
Bottom support
7
BH1000 Backpack Harness
8. Remove the white lever and torsion spring. Remove 8 screws and cord anchor to
disassemble the ejection mechanism . If any part is broken, replace it accordingly.
8
Description
Part Number
QTY.
Description
Part Number
QTY.
Ejection mechanism
3126773001
2
White lever
3126773001
1
Tapping screw
5610294001
8
Torsion spring
3660682001
1
Cord anchor
3122798001
4
Spring
3660306002
2
White lever
Ejection
mechanism
Torsion spring
Cord anchor
BH1000 Backpack Harness
9. Assemble all parts in reverse order.
9
Upon continuous product improvement, please using the latest SBOM & Parts list to order spare parts if necessary.
THE END
BH1000 Backpack Harness
Note: There is no specific order for assembling the bottom support and the rear housing. Finally,
assemble back the strap and the hook(refer to the operator’s manual).
Bottom support
Rear housing
Autres manuels EGO Bloc de piles
EGO
EGO BA2242T Manuel utilisateur
EGO
EGO BA2240T-FC Manuel utilisateur
EGO
EGO BA1120E Manuel utilisateur
EGO
EGO BA2240E Manuel utilisateur
EGO
EGO POWER+ BAX1500 Manuel utilisateur
EGO
EGO BA1120E Manuel utilisateur
EGO
EGO BAX1300 Manuel utilisateur
EGO
EGO BACKPACK LINK BH1001-FC Manuel utilisateur
EGO
EGO BA2240T Manuel utilisateur
Manuels Bloc de piles populaires d'autres marques
Inventus Power
Inventus Power PROTRXion S-12V100-TRX-HD Manuel utilisateur
Clas Ohlson
Clas Ohlson PW-290A Manuel utilisateur
EINHELL
EINHELL MULTI-Ah Power X-Change Plus Manuel utilisateur
Samsung
Samsung EB-U3300 Manuel utilisateur
ECTIVE
ECTIVE LC Series Manuel utilisateur
Narada
Narada 12REXC70 Manuel utilisateur