www.egiaudio.com
10
1Keep the remote control button pressed for at least 3 seconds
to access to the confirmation screen.
2Press each number (2, 4, 6, 8) only once in any order to
access to the selection screen.
3Press the button that you want to change on the remote control
page. Press repeatly to select any of the available options.
4Press KEY to display all the available icons on the LCD screen.
Repeat step 3 until all changes are made.
5Once you have defined the screen, press OK to confirm
changes. If you do not want to save changes, press EXIT.
LCD Edit mode: Device buttons
The edit mode allows you to define the touch screen so as to match it with your existing remote controls.
6The button on the 40100 Remote Control blinks. Press
the same button on the remote control until it stops blinking.
Repeat the process with every blinking button and finish the
copy operation.
NOTE:
If a code of your TV remote control already exists on the 40100
Remote Control, CODE will be displayed on the screen during
the learning process.
Should you wish to learn a code on any of the device buttons,
for instance the TV button; press the TV button for at least 3
seconds. The TV button will start blinking.
Then press the start button on the TV remote control. If it has
been learnt correctly, the 40100 Remote Control screen will
display OK .
5-10 cm.
