Efitment B019 Manuel utilisateur

B019MagneticTensionFoldingBikeUserManual

IMPORTANT：

Read all instructions carefully before using this product. Retain this manual for future

reference. For customer service, contact [email protected].

IMPORTANT SAFETY INSTRUCTIONS

Note the following precautions before assembling and using the machine.

Assemble the machine exactly as described in the instruction manual.

Before exercise, in order to avoid injuries, warm-up exercises are

recommended.

Please make sure all parts are not damaged and are tightened well before use. This

equipment should be placed on a flat surface. Using a mat or other covering

material on the ground is recommended.

Please wear proper clothes and shoes when using this equipment; do not wear

clothes that might catch any part of the equipment.

Do not attempt any maintenance or adjustments other than those described in this

manual.

Do not use the equipment outdoors. It is not a commercial model.

This equipment is for household use only.

This machine can be used by one person at a time.

If you feel any chest pains, nausea, dizziness, or short of breath, you should

stop exercising immediately and consult your physician before continuing.

10.

This bike is intended for adult use only. Keep children away from the bike.

11.

Before beginning exercise, remove all objects within a radius of 4 feet from the machine.

12.

The maximum weight capacity for this product is 240 LBS.

WARNING: Your health can be affected by incorrect or excessive exercise. Consult a doctor

before beginning your exercise program. This machine is not suitable for therapeutic

purpose.

CAUTION: Read all instructions carefully before operating this product. Retain

this Owner’s Manual for future reference.

WARNING: This product can expose you to one or more chemicals known to

the State of California to cause cancer and birth defects or reproductive

harm. For more information go to www.P65Warnings.ca.gov.

PARTS LIST

No.

Description

Qty

No.

Description

Qty

Main Frame

Bearing 6203Z

Handlebar

Bushing Φ21xΦ15.2x3.0

Meter Post

Nylon Nut M6

Front Stabilizer Φ50x1.5

Cap Nut M10

Magnetic Wheel Φ180x25

Bolt M10x56

Arc Washer Φ6

Arc Washer Φ10xΦ20x2.0

Tension Control Knob

Flat Washer Φ6

Adjustment Knob M16

Flat Washer Φ8

Belt 270/J4

Outer Hexagonal Bolt M8x20

Computer

Cross Pan Head Tapping Screw

ST4.2x20

Magnetic Bracket

Tension Spring Φ20x39xδ3.2

Seat Post Plastic Bushing

Nylon Nut M8

Chain Cover

Outer Hexagonal Bolt M6x20

Spring 65Mn/Φ10x45xδ1.0

Pressure Plate

Cross Pan Head Tapping Screw

ST2.9x9.5

Bearing 6000Z

Flat Washer Φ23xΦ35x2.0

Flat Washer Φ5

Puller Bushing (7/8)"

Flat Washer

Hexagonal Flat Nut (7/8)"

Flat Washer Φ40x2.8

Belt Pulley with crank

Handrail Arm End Cap

Left Foot Pedal (1/2)"

Handrail Arm Foam Grip Φ33xΦ23x450

Right Foot Pedal (1/2)"

Pulse Sensors

Bearing Bush Φ55.6x16

Circlip Φ10

Bearing Φ44.5

Inner Pan Head Hexagonal Bolt M8x15

Inner Pan Head Hexagonal Bolt

M6x15

Wire Plug

Seat Post

Hexagonal Nut M6

Sensor Wire

Flat Washer

Seat Cushion

Cross Pan Head Screw M5x20

End Cap for Front Stabilizer

Puller Bushing (15/16)"

End Cap for Rear Stabilizer

Rubber Bushing

Magnetic Wheel Axle Φ17x90

Axle Sleeve

No.

Description

Qty

No.

Description

Qty

Rotation Shaft

Rear Stabilizer Φ50x1.5

Cross Pan Head Self-tapping

Screw ST4.2x12

Flat Washer Φ10xΦ20x2.0

Pin Φ8x60

Wave Washer Φ15xΦ21x0.3

HARDWARE BAG

Spanner S10-S13-S17-S19 1PC Spanner with Phillips Screwdriver S13-S14-S15 1PC

Allen Wrench S5 1PC

(35) Bolt M10x56 4PCS (8) Adjustment Knob M16 1PC

(36) Arc Washer Ø10xØ20x2.0 4PCS

(34) Cap Nut M10 4PCS

EXPLODED DRAWING

ASSEMBLY INSTRUCTIONS

Step 1：Front and Rear Stabilizers

Position the Front Stabilizer (No. 4) in front of Main Frame (No. 1) and align bolt holes.

Attach the Front Stabilizer (No. 4) onto the Main Frame (No. 1) using 2 Bolts (No.

35), 2 Arc Washers (No. 36) and 2 Cap Nuts (No. 34). Tighten with the Spanner

provided.

Repeat the same procedure to assemble Rear Stabilizer (No. 64).

Spanner S10-S13-S17-S19

(35) Bolt M10 x 56, 4pcs (36) Arc Washer Φ10, 4PCS (34) Cap Nut M10, 4PCS

Step 2: Left and Right Foot Pedals

The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for Left.

Attach the Left Foot Pedal (No. 20) to the left Crank (No. 19), and turn the Left Foot

Pedal (No. 20) by hand counter-clockwise. Then tighten with Spanner with Phillips

Screwdriver provided.

Note: Do not turn the Left pedal clockwise to tighten or will strip the threads.

Attach the Right Foot Pedal (No. 21) to the right Crank (No. 19). Turn the Right Foot

Pedal (No. 21) by hand clockwise, then tighten with the Spanner with Phillips Screwdriver

provided.

Spanner with Phillips Screwdriver S13-S14-S15

用盘头方劲螺栓M10*56 (35) 弧形垫片Φ20*Φ10.5(36)

Step 3: Seat Post, Seat Cushion

Remove 3 Flat Washers (No.38) and 3 Nylon Nuts (No. 42) from under the Seat Cushion

(No. 27).

Attach the Seat Post (No. 25) to the Seat Cushion (No. 27) using 3 Flat Washers (No. 38)

and 3 Nylon Nuts (No. 42). Tighten with Spanner with Phillips Screwdriver provided.

Insert the Seat Post (No. 25) into the Main Frame (No. 1), then insert the Adjustment

Knob (No. 8). Turn Adjustment Knob (No. 8) clockwise to lock the Seat Post (No. 25) at a

suitable height.

Spanner with Phillips Screwdriver S13-S14-S15

(38) Flat Washer Φ8, 3PCS

(42) Nylon Nut M8, 3PCS

Step 4: Computer Installation

Remove 4 Inner Pan Head Hexagonal Bolts (No. 24), 2 Flat Washers (No. 37) and 1 Arc

Washer (No. 6) from Handlebar Post (No. 2).

Attach Handlebar (No. 2) onto Meter Post (No. 3) using 4 Inner Pan Head Hexagonal

Bolts (No. 24), 2 Flat Washers (No. 37) and 2 Arc Washers (No. 6). Tighten with the Allen

Wrench S5 provided.

Connect the wire that comes from Computer (No. 10) with Sensor Wire (No. 26).

Allen Wrench S5

(24) Inner Pan Head Hexagonal Bolt M6x15, 4PCS (37) Arc Washer Φ6, 2PCS

(6) Flat Washer Φ6, 2PCS

Table des matières

Autres manuels Efitment vélo d'appartement

Efitment

Efitment IC035 Manuel utilisateur

Efitment

Efitment B004 Manuel utilisateur

Efitment

Efitment IC014 Manuel utilisateur

Efitment

Efitment IC028 Manuel utilisateur

Efitment

Efitment IC037 Manuel utilisateur

Efitment

Efitment IC007 Manuel utilisateur

Efitment

Efitment IC033 Manuel utilisateur

Efitment

Efitment IC038 Manuel utilisateur

Efitment

Efitment B015 Manuel utilisateur

Efitment

Efitment B027 Manuel utilisateur

Efitment

Efitment IC033 Manuel utilisateur

Manuels vélo d'appartement populaires d'autres marques

Weslo

Weslo Vector 302 Guide de démarrage rapide

TOORX

TOORX BRX85 Manuel utilisateur

Matrix

Matrix KranKcycle Manuel utilisateur

Matrix

Matrix IC3 Manuel utilisateur

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manuel utilisateur

Monark

Monark 827E Manuel utilisateur

Stamina

Stamina 1310 Manuel utilisateur

American Fitness

American Fitness SPR-BK1072A Manuel utilisateur

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manuel utilisateur

BH FITNESS

BH FITNESS H9158H Manuel de l'opérateur

Body Sculpture

Body Sculpture BC-7220G Manuel utilisateur

Cateye

Cateye EC-2300 Manuel utilisateur

FYTTER

FYTTER RACER RC MSR Manuel utilisateur

Kikos

Kikos HM-9090M Manuel utilisateur

Pro-Form

Pro-Form 345 Zlx Bike Guide de l'utilisateur

Fuel Fitness

Fuel Fitness SU135-40 Manuel utilisateur

NordicTrack

NordicTrack Gxr 4.2 Bike Manuel utilisateur

Vision Fitness

Vision Fitness U70 Manuel utilisateur