EDT EX-RAY Manuel utilisateur
EX-RAY
VOLTAGE
USER’s MANUAL
SPEED | DISTANCE | TEMP | CLOCK | BATT VOLTAGE
“An Aftermarket solution
for Electric Vehicles used
on-road or off-road”
Digital Speedometer Panel With Voltage
Meter for Golf Carts, NEV, Conversions
Normal Mode:
= Activate backlight manually
= Switch between screens in normal mode
= Start or stop the stop watch
Data Setting Mode:
= Enter data setting mode
= Switch between screens in data setting mode
= Scroll through current data setting
= Move to next digit of current data setting
Data Reset:
= Reset single-ride data
Adjustable Trip Distance Edit:
= Enter/exit adjustable trip distance edit mode
= Scroll distance value
Rally Mode:
= Enter/exit rally mode
= Scroll distance value
Lap Timer Mode:
= Enter/exit lap timer mode
= Clear lap timer data
= Start/stop lap timer
= Signal new lap
= Enter/exit lap data review mode
= Scroll through lap information
Short Cuts
2
3
Table Of Contents
2 Short Cuts (Quick Set up guide)
3 Table Of Contents
4 Welcome to EDT llc
> Enter Dealer and warranty purchase information
5 Precautions
6 Specications
8 Overview
11 Installation
12 Parts Breakdown
13 Universal Bracket - Steering Column Mount
15 CNC Bracket - Steering Column Mount
18 Temp Sensor Mount
22 General Speed 10mm BOLT Sensor Installation
25-Short hub Mag, 28-31 Short-long axle,
32-Jakes Disc Brake, 34-ClubCar Lift
36 Speed TAB Sensor ClubCar XRT Installation
38 Power Cable Installation
39 Steering Column Wire Protector
40 Wheel Size Calculator
43 Data Setting Mode
> MPH/KPH, Temp limits, Time, DC Voltage
warnings, Maintenance,
52 Normal Screen Modes
> Screen 1-2-3, Sleep Mode, Reset data screens
54 EX-RAY Features
> Explanations of all screen data, settings, functions
63 Troubleshooting / FAQ’s
65 Inch to Metric Tire Size Conversion Chart
66 Glossary
68 EX-RAY Model Numbers, Kits, Replacement Parts
70 EX-RAY USER Setup notes and battery change dates
72 Warranty Statement
Thank you for purchasing an EDT.llc Product:
The EX-RAY™ is Digital Speedometer Display, the EX-RAY™
product line provides valuable information about your vehicle
for your gas or electric golf car or modied buggy, Neighbor-
hood Electric vehicle (NEV), or Small Task Oriented Vehicle.
Please read this manual carefully before installing your
EX-RAY™ Display. Note: This Manual intended as guide to
proper installation but cannot predict every possible applica-
tion. Some modications may be required.
EX-RAY™ is a trademark of the Energy Design Tek LLC
Company Oregon USA
Please Record Important Information:
For future reference and customer support, please record the
following information:
PURCHASE DATE: ______________________________
DEALER: ______________________________________
DEALER PHONE: _______________________________
EX-RAY MODEL (ON BOX): _______________________
Keep this manual, sales receipt, and original box for future
use. Serial Number TAG and WARRANTY last pages.
SAVE THESE INSTRUCTIONS
4
Welcome to EDT-Exray
Copyright ©2013
WARNING:
When using the EX-RAY™
follow basic precautions,
including the following:
• Read all instructions be-
fore using the EX-RAY™
• When installing the DC
Motor temperature Sensor,
be careful removing the
bolt and not to damage the
motors internal eld coil.
EDT llc is not responsible
for damage done during this
process.
• Use EX-RAY™ only for its
intended purpose.
• To reduce rick or injury, do
not disassemble EX-RAY™
or its accessories.
• EX-RAY™ can be used
in the rain but should not be
used under water.
• Do not leave the main unit
in direct sunlight when not
being used.
• Check magnetic sensor
gap and magnet mounting
periodically.
• Do not bend, twist, kink, or
otherwise abuse the sensor
cables. A damaged cable
may produce incorrect read-
ings.
• When installing EX-RAY™,
turn the vehicle power off
(or ignition switch off); the
wires carry power from the
vehicles battery.
• Avoid contact with gaso-
line, de-greasers or other
chemical cleaners as they
may damage the EX-RAY™.
• Do not exceed 60VDC at
any time as this may dam-
age the EX-RAY™.
Precautions
5
Copyright ©2013
Specications
6
7
Specications
Overview
EX-RAY
™ Digital Speedometer:
Main Display:
• The display panel includes 3-user buttons, 2-warning
LED’s, and the LCD screen.
LED’s:
• Amber LED: Lights for temperature warning alert
(SOLID), Battery LOW Warning (FLASH).
• Red LED: Lights for over-temperature alert (SOLID)
and Battery LOW DANGER (FLASH).
Remote Switch (optional):
• The optional remote switch (sold separately) may be
required when access to the display buttons is not pos-
sible. Contact EDT llc for more information. (This is not a
standard option and special order only)
8
UP
MODE
DOWN
Small arrow
faces UP
Remote
Switch
Amber
LED
Red
LED
LCD
Screen
DOWN Left
Button
UP Right
Button
MODE Center
Button
Parts and Features
9
TO ACTIVATE BACKLIGHT MANUALLY PRESS
Display Backlight:
EX-RAY is equipped with a backlight for easy viewing during
night time operation.
Using External 12V Power:
• Display Backlight will light up with all ve backlight LED’s
• EX-RAY will remain lit as long as it senses wheel move-
ment. After 20 minute of inactivity, EX-RAY shuts off
the backlight. Press any button, roll the wheels, turn on
key switch (electric golf cars) or start the engine (gas golf
cars) and EX-RAY will light up again
• Amber and Red LED’s enabled (Shift or temperature)
Using Internal Batteries Only:
• EX-RAY will only stay lit for 3 seconds
• EX-RAY backlight will light up with 10% power to conserve
the internal battery power.
• If the LO symbol is present, the backlight will not turn
on. The LO symbol appears when battery voltage drops
below 2.45V
• If ambient temperature is cold (below -5°C, 23°F) the
backlight will not turn on.
Battery
Reset
4mm
Mounting
Holes
Reset Button:
Use the Reset Button to erase data form the current ride includ-
ing clock and trip distance. Reset may also be required when
ever UNPLUGGING A SENSOR. (Forced computer to re-read
the sensor )
Internal Battery:
• EX-RAY has an internal non-rechargeable Lithium watch
type battery (#CR2032). The computer can be run from the
internal battery without external connection to vehicle power
source.
• To change the battery, unscrew the battery cap on the back oft
he computer with a coin. Make sure the POSITIVE SIDE of
the battery is FACING UP when replaced.
• REPLACE WITH BATTERY MODEL NUMBER CR2032
10
Parts and Features
Table des matières
