EDM LI207 Manuel utilisateur
Electronics Design &
Manufacturing PTY LTD
QUICK GUIDE
SMART SOLUTIONS FOR SMART HOMES
RGBCW Bulb
- LI207 Rev 1.0
Instruction Manual
Bulb - Main Unit
What's in the box
Dimensions
Consult the checklist below for all components.
1
130mm
60mm
Mounting types
Description
Lumens
Beam Angle
Operating
Environment
2
85-265V AC 50/60HZPower
600lm, Dimmable by APP
270˚
-5~45˚C Degrees
80% Humidity
Bayonette - B22 Eddison Screw
- E27
Install
3
2Turn light off/on rapidly 5 times to initiate pairing mode.
1Insert the bulb into any provided light socket (B22 or E27) and
power on.
Connect
Please keep network available
Download
Set up router
4
This device only supports 2.4GHz WiFi frequency, it does not support
5GHz frequency or special characters such as !@#$%^&*(). Please set the
relevant parameters of the router before WiFi configuration. When your
router is configured successfully,allow your phone and device to be
within strong WiFi range to ensure a stable connection.
Interactive Home is available for both IOS and Android. Search “Interactive
Home” on the Apple / Google Play Store, or scan the QR-Code below.
5
Registration Process
Open the interactive Home APP, click "Register",
read the "Privacy Policy" and click "Agree" .
Step 2
Step 1
Input a valid Email address and click "Get Authentication
Code". Once received, input the Verification Code to
finalize login.
QR Code Configuration
Getting started
Process
Open the Interactive Home APP, click "+" or "Add Device".
1.
Step 1
6
Follow the instructions and make sure your passwords are
inputed correctly.
2. Once you have created a home and named your desired rooms
you should be all set to connect your smart device.
Step 2
Step 3
7
Input WiFi password and click "Confirm" & hold phone near
device. (You can change the network connection before
pairing)
Select “Lighting” then “”Lighting (Wi-Fi)”. Power the device on and
make sure the bulb is flashing rapidly.
About 10cm
Step 4
Step 5
8
The configuration should complete within 30s. If unsucces-
ful, you will be propted with potential issues and their reso-
lutions.
Once the device is added, you are able to change the nick-
name and room assignment from this menu (These settings
can be changed in the Home Management settings).
Eva Cam
Smart Bulb
Smart Bulb
FAQ
9
Q: I have multiple bulbs, can i control them all at once?
A: Yes, you can create a group to control multiple lights at the
same time. Navigate to device settings -> create group ->
select your other bulbs you would like to be in this master
group -> set the group name, then you will see the new group
on your “All devices” page on the home screen.
Q: How to change the bulb to a different WiFi network?
A: Firstly, reset bulb by turning light on/off 5 times , Then you
connect your phone to the new WiFi and set up the bulb
again.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the
bulb closer to the router, and if not, it is recommended to reset
the device and add it again.
Table des matières
Autres manuels EDM Équipement d'éclairage
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
