Edimax EW-7228APn Manuel utilisateur

Macintosh Installation Guide

07-2012 / v1.0

Web Management Interface

1. Have your Macintosh computer operate as usual, and click on “System

Preferences”.

2. In System Preferences, click on “Network”.

3. Here you will see all of your network connections. Remove any Ethernet

cable that may be connected, so that the “Ethernet”status in the left

sidebar displays “Not Connected”, as shown below. Then, you need to

ensure that your Macintosh’s Wi-Fi is switched off. Select “Wi-Fi”from the

left sidebar.

4. If your Wi-Fi is switched on, click on the button labeled “Turn Wi-Fi Off”.

The “Network”screen should now look like the screen below, where under

the heading “Wi-Fi”in the left sidebar, the status is shown as “Off”.

5. Connect one end of an Ethernet cable to the Ethernet port on your

computer. Then connect the other end to an Ethernet port on the access

point, as shown below (1). Plug the power adapter into the device’s 5V

power port, and plug the adapter into a wall socket (2).

The PWR LED and corresponding LAN LED on the access point should now

light up.

6. Network Preferences will now display an Ethernet adapter, as shown below.

The status of “Ethernet”should be “Connected”.

7. Click on “Ethernet”in the left panel and then click the drop down arrow for

the menu labeled “Configure IPv4”in the right panel. From the drop down

menu, select “Manually”.

Note: The access point uses the default IP address

192.168.2.1, which may not be in the same IP address

subnet of your network. Accordingly, you need to

modify the IP address of your Macintosh to

192.168.2.10, as shown in the next step.

Note: Please refer to the user manual for guidance on

how to assign a new IP address to the access point. If

the default IP remains unchanged, you will need to

repeat this process and modify the IP of your

Macintosh every time you wish to configure the access

point.

8. In the panel on the right side, enter IP address 192.168.2.10 and subnet

mask 255.255.255.0. Click on “Apply”.

9. In the left sidebar, “Ethernet”should now display “Connected”as shown

below. In the right panel, you should see the IP address 192.168.2.10 and

subnet mask 255.255.255.0.

10. Open your internet browser and enter http://192.168.2.1 in the address

box. In the pop up window, enter the following username and password:

Username: admin

Password: 1234

Click “Log In”.

11. This will open the access point’s web management interface, which allows

you to configure the functions and settings of the access point. Please refer

to the user manual for more information about configuration; the following

is an example of how to set the access point to “Universal Repeater”mode.

Universal Repeater Mode

1. On the “Status and Information”page, click “Basic Setting”in the left menu.

Then click the arrow to open the menu labeled “Mode”. Select “Universal

Repeater”mode.

Click the “Select Site Survey”button. You will see a list of available Wi-Fi

networks, as shown below. Choose your Wi-Fi network and click on “Done”. If

your Wi-Fi network is not shown, “Refresh”the list of available networks, then

“select”your Wi-Fi network.

Note: Make a note of the “Encryption”listed for your

Wi-Fi network, as you will need it later in this

procedure, during Step 4. In this example, “Encryption”

is “WPA2-PSK’.

Click “Done”to close this window.

2. The “Root AP SSID”is your main Wi-Fi router. The “MAIN ESSID”is the SSID

of the repeater. Click the box labeled “MAIN ESSID”and enter a name for

reference. In the example below we used the name “repeater”. Different

SSIDs ensure that you can easily differentiate between devices. Click on

“Apply”.

3. You will see a screen which displays “Save settings successfully!”Choose

“Continue”.

Note: Please do not choose “Apply”at this point. It is

necessary to continue and configure the security

settings of the access point before it can function.

4. Select “Security”from the left sidebar in the Edimax web management

interface. This will take you to the screen shown below. Under the heading

“Security Settings”, open the menu labeled “Encryption”.

Select the appropriate type of encryption, based on the security settings in

your existing Wi-Fi network, as displayed in Step 1. In this example, we

select “WPA pre-shared key”.

Note: You need to select the same encryption as your

existing Wi-Fi network, otherwise this repeater mode

cannot connect to it.

5. Then you need to enter your existing network security settings.

For “WPA pre-shared key”encryption, as shown in the next screenshot,

select “WPA2(AES)”in the field marked “WPA Unicast Cipher Suite”.

Underneath, open the menu labeled “Pre-shared Key Format”, and choose

“Passphrase”. Finally enter your existing wireless network password into

the field labeled “Pre-Shared Key”. For other encryption types, please refer

to the user manual for detailed instructions.

Note: The access point must use the same wireless

encryption password as with the root wireless

network, i.e. your existing Wi-Fi network.

When this is complete, click “Apply”.

6. You will then see the following screen. Please click “Apply”to restart the

system and bring the changes into effect.

Autres manuels pour EW-7228APn

Autres manuels Edimax Point d'accès sans fil

Edimax

Edimax EW-7206APg Manuel utilisateur

Edimax

Edimax CV-7438nDM Instructions de montage

Edimax

Edimax EW-7288APC Manuel utilisateur

Edimax

Edimax EW-7479CAP Manuel utilisateur

Edimax

Edimax EW-7438APn Manuel utilisateur

Edimax

Edimax CAP1300 Manuel utilisateur

Edimax

Edimax EW-7479CAP Manuel utilisateur

Edimax

Edimax EW-7206APg Manuel utilisateur

Edimax

Edimax EW-7476HPC Manuel utilisateur

Edimax

Edimax Office 1-2-3 Manuel utilisateur

Edimax

Edimax EW-7206APg Manuel utilisateur

Edimax

Edimax EW-7416APn v2 Manuel utilisateur

Edimax

Edimax Wireless LAN Access Point Manuel utilisateur

Edimax

Edimax CAX1800 Manuel utilisateur

Edimax

Edimax EW-7228APn Manuel utilisateur

Edimax

Edimax EW-7416APn Manuel utilisateur

Edimax

Edimax OAP900 Manuel utilisateur

Edimax

Edimax EW-7228APn Manuel utilisateur

Edimax

Edimax EW-7428HCn Manuel utilisateur

Edimax

Edimax EW-7205AP Manuel utilisateur

Edimax

Edimax EW-7206APg Manuel utilisateur

Edimax

Edimax EW-7228APn Manuel utilisateur

Edimax

Edimax EW-7316APn Manuel utilisateur

Edimax

Edimax EW-7209APg Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur