Edimax EW-7228APn Manuel utilisateur
EW-7228APn
Quick Installation Guide
07-2012 / v1.1
1
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. ma es no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right
to revise this publication and to ma e changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. For more information about this product, please refer to the
user manual on the CD-ROM. The software and specifications are subject to change
without notice. Please visit our website www.edimax.com for updates. All brand and
product names mentioned in this manual are trademar s and/or registered trademar s
of their respective holders.
Edimax Technology Co., Ltd.
Add: No. 3, Wu-Chuan 3rd Rd., Wu-Ku Industrial Par , New Taipei City, Taiwan
Tel: +886-2-77396888
Email: [email protected]
Notice According to GN General Public License Version 2
Certain Edimax products include software code developed by third parties, software code is subject to
the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Please see the
GN (www.gnu.org) and LPGL(www.gnu.org) Websites to view the terms of each license.
The GPL Code and LGPL Code used in Edimax products are distributed without any warranty and are
subject to the copyrights of their authors. For details, see the GPL Code and LGPL Code licenses. You
can download the firmware-files at http://www.edimax.com under "Download" page
.
2
Getting Started
Before you start using this access point, please chec if there’s anything
missing in the pac age, and contact your dealer of purchase to reclaim any
missing items.
Wireless access point x 1
CD (EZmax Setup Wizard, Multi-language Quic Installation Guide and User
Manual) x 1
Power adapter x 1
3dBi antenna x 1
Accessory it x 1
Quic installation guide x 1
Front panel:
Item Color Status Description
On Device is powered
PWR
(Power) Green Off Device is not powered
Flashing Data is being transmitted
wirelessly
WLAN
(Wireless LAN) Orange
Off Data is not being
transmitted wirelessly
On Ethernet port connected to
a valid device
Flashing Data is being transmitted
through the Ethernet cable
1 to 5
(LAN Ports 1 to 5) Green
Off No valid connection
3
a. Antenna Connector
This is where you connect the antenna. It is a round connector (standard
reverse SMA)
b. 5V DC
This is where you connect the power adapter.
c. WPS/Reset Button
Press this button and hold for 20 seconds to reset the access point to
factory default settings. Press this button for less than 5 seconds to start
WPS functions.
d. 10/100M LAN Ports
Connects this access point to other Ethernet devices (switches, routers, or
other wired networ devices)
Installation
Note: If your computer goes online with a static IP,
instead of receiving a dynamic IP from a DHCP server,
please write down your static IP details before
proceeding. For information on how to find your IP
details, please see the user manual.
1. Connect one end of an Ethernet cable to the Ethernet port on your
computer. Connect the other end to an Ethernet port on the access point.
2. Plug the power adapter into the device’s 5V power port, and plug the
adapter into a wall soc et. The PWR LED should light up.
b.
a.
c.
d.
4
3. Insert the Edimax CD into your computer’s CD drive. When the AutoPlay
screen appears, select “Run Autorun.exe.”
Note: If a popup window appears as ing “Do you want
to allow the following program to ma e changes to this
computer”, please clic “Yes” to continue.
4. Clic on “Setup Utility” in the main menu, then select “English” to continue.
5. The setup wizard will search for the access point. When it has successfully
found the device, clic “Next” to continue.
5
6. The setup wizard will prompt you for a password. Enter the default
password, 1234.
7. The setup wizard will then show the access point’s IP information. The
default IP is 192.168.2.1. Clic “Next” to continue.
Note: Please do not select “Automatically assign an IP
address from your networ ” unless you are performing
more advanced setup. For first-time installation, please
use the default IP address.
8. You now have the option of selecting which mode you want to use.
6
Access Point Mode
1. Select Access Point Mode and clic “Next”.
2. You will be prompted to set the SSID of this access point. The SSID will be
the name of the access point when you connect to it wirelessly. The default
SSID is Edimax AP. This page also offers the option to change the password
used to access the device’s configuration settings. For first time setup,
please simply clic “Next” without changing anything.
3. You will now be prompted to set up a wireless encryption password. You
have the option of using no security encryption, or selecting the WEP or
WPA pre-shared key encryption schemes. It is recommended that you set
up an encryption method, though, for security reasons.
4. Y
7
ou will see a final confirmation screen, listing the settings you have
selected. If everything is correct, clic “Set” to continue.
5. The device will save your settings, then reboot. Please do not disconnect or
turn off the device during this process.
6. After the device reboots, you will see a final congratulation screen. Clic
“Finish” to complete the setup.
AP Client Mode
1. Select AP Client Mode and clic “Next”.
8
2. You will have the option to change the password used to access the
device’s configuration settings. For first time setup, please simply clic
“Next” without changing anything.
3. The device will search for nearby wireless networ s to connect to. If you
cannot find the access point you wish to connect to, clic “Scan” to refresh
the list of wireless networ s. Select the wireless networ you wish to
connect to, and clic “Next” to continue.
4. If the wireless networ you selected requires an encryption password,
enter the password here. Clic “Next” to continue.
5. You will see a final confirmation screen, listing the settings you have
selected. If everything is correct, clic “Set” to continue.
9
6. The device will save your settings, then reboot. Please do not disconnect or
turn off the device during this process.
7. After the device reboots, you will see a final congratulation screen. Clic
“Finish” to complete the setup.
Repeater Mode (WiFi Extender)
1. Select Repeater Mode and clic “Next”.
2. You will be prompted to set the SSID of this device. The SSID will be the
name of the device when you connect to it wirelessly. The default SSID is
Edimax AP. This page also offers the option to change the password used
to access the device’s configuration settings. For first time setup, please
simply clic “Next” without changing anything.
Autres manuels pour EW-7228APn
6
Table des matières
Autres manuels Edimax Point d'accès sans fil
Edimax
Edimax EW-7416APn v2 Manuel utilisateur
Edimax
Edimax CV-7438nDM Manuel utilisateur
Edimax
Edimax EW-7228APn Manuel utilisateur
Edimax
Edimax IAP1200 Manuel utilisateur
Edimax
Edimax EW-7206APg Manuel utilisateur
Edimax
Edimax EW-7203APg Manuel utilisateur
Edimax
Edimax EW-7206APg Manuel utilisateur
Edimax
Edimax EW-7438APn Manuel utilisateur
Edimax
Edimax EW-7303HPn V2 Mode d’emploi
Edimax
Edimax CAP1300 Manuel utilisateur
Edimax
Edimax EW-7479CAP Manuel utilisateur
Edimax
Edimax EW-7428HCn Manuel utilisateur
Edimax
Edimax EW-7206APg Manuel utilisateur
Edimax
Edimax IC-6230DC Manuel utilisateur
Edimax
Edimax EW-7206PDg Manuel utilisateur
Edimax
Edimax IC-3210W Manuel utilisateur
Edimax
Edimax EW-7303HPn V2 Manuel utilisateur
Edimax
Edimax CV-7428nS Manuel utilisateur
Edimax
Edimax EW-7303APn v2 Manuel utilisateur
Edimax
Edimax EW-7205AP Manuel utilisateur
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
Buffalo
Buffalo AirStation WLA-L11G Manuel utilisateur
EnGenius
EnGenius EnStationACv2 Manuel utilisateur
D-Link
D-Link DAP-3662 Manuel utilisateur
xG Technology
xG Technology xMax CN1300 Manuel utilisateur
Widelink
Widelink ezWave WAP-1100 Series Manuel utilisateur
Ubiquiti
Ubiquiti LBE-5AC-Gen2 Manuel utilisateur
