Edimax EW-7811UN Manuel utilisateur

How to install EW-7811Un / EW-7722UTn v2.0 wireless adapter in a Windows XP system

Do not plug in the USB wireless adapter to your computer yet.

1. Go to http://www.edimax.us to download the latest driver. You may need to use another computer to get on

Internet for download then use an USB flash drive to transfer the files to your XP system.

Find the Windows XP driver for EW-7811Un.

2. The download file is a zip file. You need to unzip the file to get the driver folders.

Usually you can unzip the file by right clicking on the filename then choosing “Extract all”.

After the file is unzipped, you will get the RTWLANU_Driver folder and several subfolders for different Windows version.

You may need to use a USB flash drive to save the RTWLANU_Driver folder

then plug your USB drive to your XP computer.

3. Go to your XP computer. Click on Start menu button. Right click on “My

Computer” and go to “Properties”.

In the System Properties window, please verify your system is Windows XP.

Look for “System type” in the same window.

If it lists system type: 64bit, your XP is 64bits.

If it does not list any system type, your XP is 32bits.

Minimize the System Properties window.

4. Plug Edimax wireless adapter into a USB port of your Windows XP computer.

5. In a few seconds, the “Found New Hardware Wizard” shows up. Click on the third option of “No, not this time”.

6. Click on the second option of Install from a list of specific location [Advanced]

7. Check the box of Include this location in the search. Click on “Browse”

In the Browse for Folder window, you need to look for the driver folders of wireless adapter.

If the drivers are in your USB drive, find your USB drive

under My Computer. Go into RTWLANU_Drive folder

If your XP is 32bit, open \WinXP folder. If your XP is

64bit, open \WinX64 folder. Click on OK.

You will be back to “Hardware Update Wizard”. You can

verify the path of the driver location inside “Include this

location in the search” is correct.

Click on Next to continue the setup.

8. Windows is installing the driver.

9. Click on the Finish button.

10. You may see a prompt saying “Wireless networks detected” in the system tray. There is a red X on the WiFi icon on

system tray. Click on that prompt box to go to next step.

If you do not have that prompt window, you can click on Start. Click on Run. Type in “ncpa.cpl” hit Enter key.

You will get into the Network Connection Window. There is a

Wireless Network Connection icon. Right click on it and

choose the option View Available Wireless Networks.

11. Windows XP detects available wireless networks. Select your WiFi network. Click on “Connect” button.

12. If your Wifi network has a wireless security password, please enter your password in the box of Network Key and

type again in the box of Confirm Network Key.

Click on Connect.

13. Connection status indicates Acquiring network address.

In a few seconds, the message indicates connected if you entered a correct wi-fi security password.

If your wireless adapter does not connect properly, please verify the wireless security password of your Wi-Fi network.

Please note if your wireless security is WPA2 AES, we suggest you update your WinXP to Service pack 3. XP with Service

Pack 1 or some Service Pack 2 could not support WPA2 AES security.

The wifi icon in the system tray indicates wifi connection too.

Click on the Red X on the top left corner to close that window.

14. Open your web browser like IE to access Internet. If you can browser Internet, the setup is completed.

3350 Scott Blvd., Building #15

Santa Clara, California 95054, USA

Phone 408-496-1105 • Fax 408-980-1630

www.edimax.us

Autres manuels pour EW-7811UN

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Edimax Adaptateur

Edimax

Edimax HP-5101KK Manuel utilisateur

Edimax

Edimax EP-4203DL Manuel utilisateur

Edimax

Edimax EN-9230TX-64 Manuel utilisateur

Edimax

Edimax EW-7618Ug Manuel utilisateur

Edimax

Edimax HP-6002AC Manuel utilisateur

Edimax

Edimax HP-5102AC Manuel utilisateur

Edimax

Edimax EW-7711UAn Manuel utilisateur

Edimax

Edimax IEW-7811UTC Manuel utilisateur

Edimax

Edimax EW-7708Pn Manuel utilisateur

Edimax

Edimax EW-7811GLN 2.0A Manuel utilisateur

Edimax

Edimax HP-5102 Manuel utilisateur

Edimax

Edimax EW-7722UTn V3 Manuel utilisateur

Edimax

Edimax HP-2002APn Manuel utilisateur

Edimax

Edimax EU-4308 Manuel utilisateur

Edimax

Edimax EW-7117U Manuel utilisateur

Edimax

Edimax HP-5101 Manuel utilisateur

Edimax

Edimax Edimax Wireless LAN Cardbus Adapter Manuel utilisateur

Edimax

Edimax HP-5102 Manuel utilisateur

Edimax

Edimax EW-7822ULC / UT Manuel utilisateur

Edimax

Edimax EW-7611UTn Manuel utilisateur

Edimax

Edimax EW-7317UHg Mode d’emploi

Edimax

Edimax EW-7611ULB Manuel utilisateur

Edimax

Edimax EW-7717Un Manuel utilisateur

Edimax

Edimax EU-4307 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur